Question about Epson Office Equipment & Supplies
NOTHING OTHER THAN ADJUST PAPER
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to clean the print head on the cartridges , please follow these steps\
# Hold the cartridge upside down, with the bar-code label facing you and take a damp paper towel.
# Use the towel to wipe the printhead of the cartridge on the bottom (where the ink comes out). Wipe the printhead horizontally in one direction only (left to right).
# Continue doing this until it looks clean.
# Then dab the cartridge on the towel to make sure the ink is flowing.
# Next, look inside the printer and locate the carrier that holds ink cartridges. Caution: Make sure the cartridges are not installed at this point.
1. Look for a shiny piece of metal underneath the contacts at the back of the carrier.
2. Take a damp cotton swab (use water only!) and wipe along the bottom of the shiny metal piece. Note: You may need more than one swab.
# Reinstall the cartridges, making sure you snap them correctly into the printer.
Posted on Mar 15, 2009
If you have carried out 4 to 5 head cleans, waited about 8 hours and done another 3 or head cleans doing nozzle checks after each clean (as recommended by the manual) and there is still no improvement then you will need a third party head cleaning solution such as this one:
Other makes & brands are available just google "inkjet head cleaning solution" Hope this helps.
Posted on Apr 03, 2009
SOURCE: epson bx300f installation
here it is-please vote your rating
Posted on Nov 08, 2009
pree menu on the printer > go to maintenance > go to ink cartridge > press ok > open the lid > the cartridge will be in installing position, pull and relaese the lock > pull the cartridge u want to change using the clip provided. > undo the plastic pack of the new cartridge, tear open the vaccum pack, pull out the yellow tape > keep the cartrigdge on the hoder straight and gently press the top until u hear it click ! !!
Posted on Dec 10, 2009
Epson,. has it rigged, that you must have ink in all the cartridges.............! Doesnt make a difference, if you are printing black and white ONLY.
You have to make sure that you always have ink in all of the Cartridges.
If you find this information helpful, pls rate me. TXS
Posted on Dec 30, 2009
Tips for a great answer:
Jan 05, 2016 | Office Equipment & Supplies
Apr 21, 2011 | Epson Refurbished REFURB POS PRINTER DEMO...
Mar 17, 2011 | Computers & Internet
Jan 02, 2011 | Epson STYLUS R350 Photo Printer
Dec 28, 2009 | Epson Stylus Photo R300 InkJet Printer
Nov 10, 2009 | Epson STYLUS R230 InkJet Photo Printer
Oct 29, 2009 | Epson Stylus Photo 1280 InkJet Printer
Jun 29, 2009 | Epson Stylus CX5400 All-In-One InkJet...
Nov 19, 2017 | Epson Office Equipment & Supplies
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: