I need the mixer blade - Simac 4050 Il Gelatao Magnum 1 Quart Ice Cream Maker

Buy a STOELTING instead!!!

Suleiman, your directions are not clear -- how do I "wiggle off the mixer blade assembly before the bowl"? I can't get that central spindle to budge no matter how I tap it or wiggle it or pull it or try to unscrew it. I can't take the top off the machine to get at the switch housing inside. Please, can you post a video of how to take apart a Musso Stella ice cream machine?

Check that all gears are in good working order. The paddlewill not turn properly and the motor will not run if the gears are worn ordamaged gears. Inspect the paddle for damage and replace if necessary. You alsomay need to replace worn or damaged gears in the motor. Lubricate the motor,drive shaft and motor bearings. Hope this will help you. Good Luck.

First try cleaning the outer part of squealing blades with a soft cloth and try.

If not resolved then, you need to open the case and try replacing the blades.
If the problem is still not resolved, please replace the Iccream maker

you can call Rick at Restaurant Parts and More, 1-888-814-1110. Have you model and serial numbers. He can most likely help you.

Call this # for all Simac parts. 1800 223 1898

The Use & Care Guide for the Black & Decker IC200 Arctic Twister Ice Cream Mixer can be found here;

http://useandcaremanuals.com/pdf/IC200203.pdf

Sorry someone has not responded sooner.

hamilton.kijiji.ca/c-buy-and-sell-home-appliances-black-and-decker-arctic-twist-ice-cream-mixer-W0QQAdIdZ138713610

Hi,
I have the booklet for this machine.
1) you can use any IC recipe as long as it does not exceed 1 quart. This is for vanilla:
1/2 c sugar
1 1/4 c half&half
1 1/2 c heavy whipping cream
2 eggs 2 tsp vanilla
with mixer beat eggs and sugar until thincl and cream colored. Addthe cream and vanilla mix well.

the machine:

you want to put the freezer cylinder in a plastic bag (to prevent freezer burn) and then put it in the back of your freezer until completely frozen 6 to 22 hours. You should not be able to hear liquid slosh when you shake it. For making stuff quick they recommend keeping it in the freezer in the bag.

step one: Put maker on flat surface.

two: Put the mixer bowl on the base.

three: Place frozen cylinder into to the mixer bowl (the big one) do this when you are ready to start the IC because the cylinder begins defrosting right away.

four: set the paddle on top of the cylinder, placing the peg on the freezer cylinder inside the peg hole on the paddle

five: Place the cover over the mixer bowl, locking the grooves on the motor base. Plug in, turn on, the bowl and cylinder will begin to turn.

six: Pour the recipe into the feeder hole of the cover then put the lid on.

You will need 20 to 40 minutes or until mixture is frozen. Don't stop the machine until done. If you want hard ice cream spoon the soft serve into an airtight bowl and put it in the freezer till it is like you want it.

Hope this helps, Elizabeth

the shake mixers are an add on to the machine so it should be easy to repair just the mixer itself and use it and the other mixer in the mean time. most of the wiring and fuses for the mixers are separate from any for the operation of the ice cream machine.