Question about Whirlpool SF367 Gas Kitchen Range
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: getting a error code F3E2
The F3 E2 error code indicates that the electronic oven control board in the range senses an over-temperature condition in the oven. This can be caused by a failed temperature sensor probe, a wiring problem between the sensor and the control board, or a failed electronic oven control board. If the oven is apparently not overheating when this error code appears, then your likely failure is the temperature sensor probe. If the oven is overheating, then you likely have a failed electronic oven control board due to a stuck relay not cycling the oven heating element off properly.
I recommend calling a service technician to diagnose and repair this oven failure. If you want to attempt to diagnose and repair this failure yourself, resubmit your question with additional details.
Good luck and please rate FixYa!
Posted on Dec 24, 2008
SOURCE: Screen displays error code f3e2
This code means "BAKE/BROIL range over temperature"
Problem is in either temperature sensor or the control board. Check the temp sensor and wiring from it to the control board first (connector #3, contacts 8 and 10, violet wires) . At room temperature the temp sensor resistance should be around 1080 Ohms. Also check temp sensor for short to ground. If no problems found with the sensor - replace control board.
OBTW - for the broil problem - check the fuse inline with the broil element (continuity between Conn #2, wire 1, blue and conn #4, wire 3, red). It should read several ohms. Good luck!
Posted on Oct 12, 2009
E1 means a problem with your door lock. The solenoid is not operating
or your latch switch has failed. You will need to inspect this
assembly to see where the problem lies. Use this link to see some
Posted on Jan 08, 2010
Unfortunately, this has happened to us twice and both times we have had to replace the contro panel to the tune of almost $200.
My husband thinks it's because it gtes fried when using the self-clean option. We hand-clean now.
Posted on Jan 17, 2010
Tips for a great answer:
Apr 15, 2017 | Whirlpool Kitchen Ranges
Feb 17, 2013 | Kitchen Ranges
Jun 07, 2011 | Whirlpool Kitchen Ranges
Nov 22, 2010 | Whirlpool GBS277PDS Electric Single Oven
Oct 23, 2010 | Whirlpool 30" Self-Cleaning Freestanding...
Nov 15, 2009 | Whirlpool 30" Self-Cleaning Freestanding...
Oct 12, 2009 | Whirlpool RF462LXSB Electric Range
Dec 26, 2008 | Whirlpool GR465LXLS Electric Kitchen Range
Dec 23, 2008 | Whirlpool RF365 Electric Kitchen Range
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: