Question about Dryers

1 Answer

Moffat stove don't have power on one side front and back I have changed fuse and new prongs

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 2,069 Answers

Check Breakers in your Fuse Box. sounds like it's running on 120 when it should be 240

Posted on Dec 27, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuses located on a moffat stove


There are none. It is wired into the buildings electrical panel. You have to know where the circuit breaker panel is to find a tripped breaker

Aug 10, 2016 | Moffat E32 Full Size Electric Convection...

1 Answer

How can I remove door?


Hi Tammy:
Many of the older stoves used a similar door hinge system.
When the door is fully opened it can be removed in the following way.
It's much easier with two people.
With one person on each side, lift near the hinge (closest to the stove) then pull away from the stove and at the same time, lift the handle end of the door.
There is a tab and a notch on the hinge arm that has to slide past the retainer.
To re-install, the hinge has to be set for the "door open position".
Slide the hinge arms into the slot so that the tab and slot engage in the correct positions.
Hope this helps.
Cheerfuls. .

Apr 02, 2016 | Moffat Ovens

1 Answer

Burner says hot.. wont go off, moffat stove


Hello;
My name is Peter. I am a retired field service appliance technician.

I assume you have an electric oven.

You have a defective individual burner control.

1.) Pull your oven out so you can get behind it.
2.) Unplug your oven.
3.) Remove the upper back metal cover.
4.) At the top in the center is your main oven control board. On the left are two burner controls and on the right are two burner controls.
5.) Inspect the burner controls for burn marks or melted wires.
6.) Finding the bad control unit, pull the control nob off the front.
7.) Unscrew the burner control in the front.
8.) Remove the connectors on the burner control.
9.) With the burner control in hand. re-attach the upper metal back panel on your stove.
10.) Pug in the stove and push back in place.
11.) On the burner control that you just removed note the part number. Search on the internet for best price.
12.) Continue to use your oven without the burner control.
13.) Install the new burner control when received. Remember to un-plug.

May 15, 2015 | Kitchen Ranges

1 Answer

I am looking for a fuse in my antique stove 1948 moffat


I have a Moffat of about this vintage. Are you saying you can't find where the fuses are? Mine are underneath the left-hand drawer - the drawer under the warming oven. I just pull the drawer out and I can see them.

Sep 12, 2010 | Ovens

4 Answers

1952 Moffat Bake Stove


I have a working 1952 moffat stove with warming oven if interested

Oct 27, 2009 | Kitchen Ranges

2 Answers

Im putting in new stove. i have 3 wire(6 gauge)


most stoves require a 4 wire plug..red, black, white and ground..the white is needed for the 110V to work properly..ground is there for safety incase something shorts out it will blow a fuse/trip circuit breaker

Sep 16, 2009 | Ovens

2 Answers

Turn signals dont work 97 Geo Metro


we found the flasher curcuit had no power to the hot prong. So my friend wired the flashers hot prong into the radios fuse curcuit to get power to it and put a separate 10amp fuse on the new lead.

Jan 22, 2009 | 1991 Geo Metro

1 Answer

Oven Door


I have spilt water inside the glass of my Fridgaire stove and wondering how to take the glass off the front so I can clean inside it.

Jun 02, 2008 | Ovens

Not finding what you are looking for?
Dryers Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...