Question about Toro Garden

1 Answer

I'm not asking about a leaf blower It's a toro snowthrower model # 38600. what's the proper way to remove and replace the impeller blades?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 56 Answers

You have to disassemble the entire front of the snow blower. This means removing the snow shroud, auger bits and then getting to the impeller blades. I did it once and it took me about 1 1/2 hrs to complete.

Posted on Jan 02, 2015

  • Gary Czyz
    Gary Czyz Jan 03, 2015

    Thans for the info. I removed the impeller blades one at a time and installed the new blade before removing the next old blade. I did this until I had replaced all 3 blades. You have to remove 6 bolts per blade It took about 1 to 11/2 hours

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can the plastic impeller on a model 51591 be replaced with a metal #100-9076


Probably but the problem will be when vacuuming
plastic impellers absorb shock from stones and other hard objects, where as metal blades will break off causing an imbalance of the impeller

Apr 13, 2015 | Toro Garden

1 Answer

How to replace the traction spring on a toro 521 Snowthrower


Contact Toro for a Schematic unless you have one in your possession. They usually come with the units manual and instructions.

Dec 28, 2014 | Toro Garden

1 Answer

How do I replace the blades on a toro 38600 snow blower


You should have a manual with instructions on replacements and alterations. Call Toro

Dec 05, 2014 | Toro Garden

1 Answer

Toro vibration


Replace the fan (Impleller). The fan is out of balance and cannot be repaired. Continued use will wreck the bearings, and ultimately the motor.

Nov 16, 2013 | Toro Garden

1 Answer

My blower is running extra high and hard. so high that it shakes the cap off. how can i tame it down. model 51587


Remove the bottom of the blower or vac and see if any blades are broken on the plastic fan blade, known as an impeller. If a blade is sheared off, this could be the source of your noise and shaking. This part will need to be replaced. I've just ordered one and will be replacing mine when it comes in.

Jan 06, 2011 | Toro "Toro" Super Blower/Vac

1 Answer

I need a toro impeller model no 51553 or 51587


The impeller for your Toro blower is part #98-3150 and is available from www.partstree.com for about $20 plus shipping. To avoid shipping charges, find your local Toro dealer. Go to www.toro.com to find your nearest dealer.
An exploded parts view is also provided on partstree.com's website. This should make it easier to see what has to come apart for the impeller to be replaced.
Good luck!

Nov 12, 2010 | Toro "Toro" Super Blower/Vac

2 Answers

Need carbon brush replacments


google for sources. In the 80's i was employed by a co that probuced brushes according to specs. We received them in bags, or envelopes, etc. If you cannot find them through the orig. mfgr., send the remaining brush or the holder, with as much of the brush as is remaining for proper dim. estimate and brush composition. some brushes have the composition of dry charcoal. while some such as "EGO" can substitute for a very soft pencil.

Nov 26, 2009 | Black & Decker Leaf Hog 12-AMP Electric...

2 Answers

Toro leaf blower Model 51591 from 2003 has started


Sounds like a piece of wood is caught under/between the impellor and the case/housing. When removing the impellor, you may find it has a left hand threaded nut.

Nov 13, 2009 | Toro Blowers Rake and Vac - Electric...

2 Answers

Sm.piece broke off spinner wheel; result motor not balanced


yea if you cant fin da company to order the part form which you probably cant youll have to trash it.

Jan 09, 2009 | Toro Super Blower Vac

Not finding what you are looking for?
Garden Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toro Garden Experts

Joseph Mueller
Joseph Mueller

Level 2 Expert

338 Answers

lnbn1975

Level 2 Expert

203 Answers

Mike Squire

Level 2 Expert

420 Answers

Are you a Toro Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...