Question about Dryers

1 Answer

When I press the power on the on ligth does not come on,and the dryer does not come on,befor when i press the power on the ligth blink for a secon and go out, and now when i press the power on nothing

This is from the frist guestion

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The first think you need to do is check the circuit breaker. If the breaker is off, turn it all the way off and then to the on position. If it trips off again, you have a short in the wire. DO NOT plug anything into the outlet. It is a 220 line and you can be seriously injured.
Another issue could be the circuit board is faulty and the machine will prevent itself from turning on. If the breaker is good and the machine still does not remain on, you will need to call a service technician for the dryer. Good Luck!!

Posted on Dec 13, 2014

Testimonial: "Can i change the circuit board my self,and if so where is it. :)"

  • robert charles Dec 13, 2014

    Did you check the breakers first? do the breakers stay on? If you are very handy and have some knowledge of electonics you might be able to change the circuit board. I suggest you call a technician and make sure it is the board. the board could be up to $300 a service call could be $75. if it is not the circuit board and it is some other issue you waste $300.00 Your choice.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinking ligth when pressing power but nothing happens


Change out the electrolytic caps on the power supply board, or the power supply itself.

May 31, 2011 | Akai LCT3285TA 32 in. LCD Television

1 Answer

My printer is CANON IP 2700 when i try to print Error 5100 appears in the screen and the printer blinks orange ligth


1. hold RESUME then press & hold POWER
2. release RESUME, then press it twice, the light should go amber then green again.
3. you're now in service mode (you can release POWER now)

I think waste tank reset is 4 presses of the RESUME button. To confirm, press POWER once.

May 24, 2011 | Office Equipment & Supplies

1 Answer

My Toshiba power light blinks only when I try power on. The ligth blinks 5 times, 2 times and 5 times again. The batery light turn off after power on. When i connect the power cord, the power ligth is...


you should check this thread out http://www.hardwareanalysis.com/content/topic/51345/

also if you need to convert from binary to hex use this link

http://easycalculation.com/hex-converter.php

Mar 21, 2011 | Toshiba Satellite 2400-S251 Notebook

1 Answer

My loptop D610 turn on ,caps lock blinks and ater 3 to4 secons it


I would try clearing the cmos battery. It's located under a small door under the laptop battery. Unhook the wire (laptop unplugged) and let it sit for 20 minutes. Hook it back up and try to power up. If that doesn't work www.pcrepairhelp.net has techs that work on laptops.

May 04, 2010 | Dell Latitude D600 Notebook

1 Answer

My dell (monitor) it turns on few secons but the image goes off,


First you'll have to power off the system.
Please power on the system and as soon as you see the Dell logo please tap the F2 button 3 - 4 times.
The computer will go to the system setup. Check if the screen goes blank here.
If the screen stays on then try this.
1. Please power off the system.
2. Please power on the system and as soon as you see the Dell logo please tap the F8 button 3 - 4 times. You'll reach the Windows Advanced Boot Options Menu on the screen.
3.Select Safe mode with Networking.
4. Select Administrator at the log in screen.
5. Warning dialog box with the message Windows is running in safe mode. appears. Click the Yes button.
6. The desktop appears with the words Safe Mode appearing in all four corners.
7. Uninstall the video drivers and restart the computer.
8. Resintall the video drivers.

Rate if useful.

Aug 19, 2009 | Dell 1703FPs 17" TFT LCD Flat Panel...

2 Answers

My nec vt46 does not want to turn on


You need to check the manual. It will tell you at the rear what the different lights mean.

Apr 13, 2009 | NEC VT460 Multimedia Projector

2 Answers

I can't get my tv to stay on


Bad capicitors in power supply just fixed it in my tv

Mar 27, 2009 | Westinghouse LTV-27W2 27 in. HD-Ready LCD...

Not finding what you are looking for?
Dryers Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...