Question about Sony Ericsson K800i Cellular Phone

1 Answer

I removed battery before off cycle finished,,,now it wont turn on ???

Just asked around

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The easiest thing to do is look at the terminals gold plated on the battery and quickly lick them and immediately replace the battery and back cover and it will now turn on! I know it sounds funny but the saliva has some acid in it that allows better connection between the battery terminals and the phone terminals!

Posted on Dec 13, 2014

Testimonial: "ive found out by removing the battery before the mobile had properly turned off..it has affected the processor in the mobile."

  • jamie thompson Dec 13, 2014

    It sounds to me that you did this on purpose! I dont believe this is the problem but if it is at least you know what you did wrong and wont do it again! If you want proper answers to your questions you need to give more info, is the phone old or new is the battery old or new?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Bosch dishwasher Model #SHX4APO5UC/06 wont finish the cycle and it wont drain. We have checked hoses and they are not clogged. Is it something with the control panel?


Check your motherboard for burnt contacts. Easy to remove in the door. If you able resolder and give it a try. Cheaper then a new mother board.

Aug 11, 2014 | Bosch Dishwashers

1 Answer

My washer is making a humming noise and will not run. there are currently clothes and water in the washer


remove 4 screws on the rear panel and then remove the cover, you can see the drain pump remove both hoses on the pump,it is probably plugged up,if it is they wont drain or do anything

Apr 30, 2012 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

Wont finish wash and drain


I would turn off main power then open the controls looking for any burn parts on the power board before calling any one , how ld is this unit before yu spen too much get back to me

Dec 04, 2011 | Electrolux Dishwashers

1 Answer

I have a high efficiency maytag washer. I interrupted the cycle before it was finished in the rinse and spin and now it wont work properly.l tried to get it to just spin again, but it wanted to fill with...


Thanks for choosing FixYa and welcome to the site. Looking at what you said, I would advise you to make sure that the timing is set correct. You want to make sure it is on cycle one. You can try to unplug it and see if that will reset it correctly. The timing may be stuck in spin cycle. The switch may be defective. If you have any questions, feel free to ask.

Apr 10, 2011 | Washing Machines

1 Answer

Wont finish cycle there is a F code


Remove the bottom panel.a6ecc58.jpg The tech sheet with fault codes and diagnostics is behind the motor control unit,white box to left.448bb9b.jpg Clean out the pump filter and housing,7d13dce.jpg maybe that will helpc654f05.jpg

May 21, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Put clothes in washer HOTPOINT modelWML730 started


TURN MACHINE ON TO FINISH CYCLE THEN RE WASH WITH SOAP ETCH,DOOR WILL NOT OPEN MID CYCLE SAFTY LATCH,YOU CAN TURN PROGRAM TO FINAL SPIN TO EMPTY MACHINE AND FINISH PROGRAM THEN DOOR WILL OPEN

Jan 06, 2010 | Washing Machines

2 Answers

1996 gmc suburban wants to turn over but wont


could be an ignition or the computer

Jan 16, 2009 | 1996 GMC Suburban

1 Answer

Washer wont complete cycle. its full of water and I cant drain it


if this a manuel timer,,you either stripped the ,,knob,,or you broke the timer its self...make sure that timer can be pushed and pulled,, pull ----on push is off

Nov 30, 2008 | Kenmore 24902 Top Load Washer

Not finding what you are looking for?
Sony Ericsson K800i Cellular Phone Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Sandeep Shenoy

Level 2 Expert

187 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...