Question about Computers & Internet

1 Answer

What do the different color leds mean on the NVG589 on the ethernet ports

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 51 Answers

From the manufacturer's manual (page 92):

Ethernet 1,2 3,4:

  • Orange/Amber:when a Gigabit Ethernet device is connected to each port.
  • Green: when 10/100 Ethernet device is connected.
  • Flash for Ethernet traffic passing.
http://community.arubanetworks.com/aruba/attachments/aruba/unified-wired-wireless-access/26009/1/Motorola%20NVG589%20VDSL2%20Gateway.pdf

Posted on Dec 12, 2014

  • Mark Leebove
    Mark Leebove Dec 12, 2014

    Thanks. I tried to find a manual but could not. Thanks again

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nvg589 modem xp say's unpluged


The XP is telling you it cannot see an internet connection.

Check the settings on the modem with your supplier and the XP set up.

May 10, 2014 | NetGear Computers & Internet

1 Answer

Port LEDs keep flashing in sequence.


The ethernet switch maybe scanning the ports for connected computers.

Nov 05, 2012 | Linksys SD208 8-Port Ethernet Switch

5 Answers

What port to use with ethernet cable


Hi all of you i see an app for iphone and android phone Ethernetpedia.which is i think very help full.which solve all your problem. port-use-5bezvpwuytf0bd1jcum4m4zn-3-0.jpeg

May 03, 2011 | Computers & Internet

1 Answer

I cant install my router. The internet, power, WLAN, and DMZ lights are all on, but none of the Ethernet port lights are on, but when I try to complete the install I get the following error message: Unable...


If the ethernet light is not coming that means your router is not detecting your computer. Try to plug the computer on any other port.

To check if your ethernet ports are fine you can perform a loop back test. You can take a cable which is not connected to anything. Than put one end of the cable to one ethernet port and put other end of that same cable to any other ethernet port. If the light on the ethernet ports led up means your ports are fine and u need to reinsatll the drivers of the ethernet card on your computer. Else your routers ethernet port are not functioning. If that is the case you can try to reset the router.

Let me know your finding.

**If this works please rate else let me know in case of further help.**

Jul 03, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I get no sync between my network card and the


Make sure your not using a crossover through cable. Also make sure your not connecting the cable into the internet port, which is usually the first or last port.
  • A straight-thru cable has identical ends.
  • A crossover cable has different ends.
  • A straight-thru is used as a patch cord in Ethernet connections.
  • A crossover is used to connect two Ethernet devices without a hub or for connecting two hubs.
  • A crossover has one end with the Orange set of wires switched with the Green set.

Nov 30, 2009 | Belkin F5D5131-8 Ethernet Switch 8 x...

1 Answer

Brother 2700CN Color Laserwriter--Loss of Ethernet Connection


No lights on network card mean that you will need to replace network port/card on printer if cable and connection is sound

Nov 28, 2007 | Office Equipment & Supplies

1 Answer

Link led blinking


WIRE AS U ARE USING WILL WORK FINE TILL 80- 85 METER. AND THERE IS DIFFERENT COLOR CODING EITHER U USE 10 METER OF WIRE OR 25 METER OF WIRE THERE IS A STANDARD COLOR CODE WHICH IS PROVIDED BY IEEE. I THINK THERE IS ANY PROBLEM IN YOUR SWITCH. IF YOUR WIRE IS OK AND PC ETHERNET CARD IS PERFECT THEN OBVIOUSLY ANY PROBLEM IS IN YOUR SWITCH. U CHECK IT PROPERLY EACH AND EVERY PORT. B'COZ SOMETIMES SOME PORTS PROBLEM CREATE HIS TYPE OF DISTRUCTION. GOOD LUCK PURUSHOTAM

Oct 01, 2007 | NetGear FS608 Networking Switch

1 Answer

3com 3300 TM - all Ethernet port not working, power led flashing


A blinking power LED means that the switch is either downloading software, or is initializing which also includes running the Power On Self Test. You may have firmware issues with the switch and/or the switch is stuck in initialization mode. You may have to contact 3com regarding a warranty issue. Hope this helps. Good luck.

Nov 20, 2006 | 3Com SuperStack 3 3300 TM Networking...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...