Question about Edimax EW-7438RPn N300 Universal Wi-Fi Extender

1 Answer

I am trying to change the information on my edimax n300 to a different internet setup. however the box and card that were with it are gone since we have moved. so is there a way i can change the infor

Since i dont have the card i am not sure what to try or if i can even do it without it. I dont even know if there is a site that i can go onto to get it changed.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Edimax Master
  • 14,161 Answers

THE SHORT ANSWER IS YES. IF YOU ARE CLOSE ENOUGH TO IT JUST LOG IN TO IT. THE ADDRESS COULD BE 192.168.100.1 OR SOMETHING TO THAT AFFECT.

Posted on Feb 20, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set up my Edimax N300 for use with my network? The IQ Setup will not accept my network security key.


Plug it in to power, then put it a lan cable between edimax and PC, then keep pushing the wds button in extender about 20seconds, then you're done but then you should set it up from the begining here is a link on how to do that. Edimax EW 7438RPn V2 N300 Universal Smart Wi Fi Extender Access Point

Aug 26, 2014 | Computers & Internet

1 Answer

Edimax n300 "lost password"


Reset the Device and reconfigure the SSID and Security Key. Try here for a user manual: http://www.edimax.com/en/produce_detail.php?pd_id=404&pl1_id=1&pl2_id=99 You may want to write down the info for future use.

Mar 22, 2013 | Computers & Internet

1 Answer

Have NetGear N300 wireless router (wnr 2000v2)fed by motorola surfboard modem. N300 Port 3 output feeds OOMA internet phone system, Port 4 output feeds HP Touchsmart desktop pc (windows 7). PC will not...


hi,

go straight from your motorola to each wired computer to see if its a wire.can you can login to the router through your wired computer(touchsmart) in the settings and see if all your wired devices are listed, look at the parental controls, reset the whole router to default if you can, if your DSL. try a different jack in the house, get everything off that line but the motorola. go straight from the service jack outside the house(in the grey box) if you have to

jm

Jul 04, 2017 | NetGear N300 Wireless Router

1 Answer

My cd will not start the setup


Make sure the router is plugged into your computers LAN port. You can enter the setup with your web browser ( internet explorer ) by typing routerlogin.com or the IP address of 192.168.0.1

It will ask for a username and a password, both are set factory to admin. Change your password to something different during the setup to be more secure

Jun 15, 2011 | NetGear N300 Wireless Router

2 Answers

EDIMAX BR-6428nS


Hi emmanuel,
I also have the same Router, what would you be needing assistance with?
if you are asking how to get in the Edimax Settings you just need to enter 192.168.2.1 on your internet explorer address bar then press enter, thiswill promt you to enter a user name and password
User name - admin
Password - 1234
unless you changed the user name and password then it shall be different.
I really am sorry but I do not have a clue what to tell you since I already asked for clarification the day before but I have not recieved any information about you concern.
Have a nice day.

Apr 06, 2011 | Edimax 4 Port Wireless AP Broadband Router...

1 Answer

Ok..i used a different laptop yesterday here at my house and the computer asked for the router pin number....put that in and it worked fine...now my ipod touch will not connect tto the internet nor will...


BELKIN ::::



WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Jan 30, 2011 | Belkin Surf N300 Wireless N Router

1 Answer

I have the belkin surf n300 and i am trying to get my xbox computer ipod and wii to conect to it but it will only connect to 1 thing at once and that is when i hit the wps button on it. The light that is...


Try this .


WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )



PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem


Regards
TOM

Jan 06, 2011 | Belkin Surf N300 Wireless N Router

1 Answer

WEP KEY


WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Dec 27, 2010 | Belkin Surf N300 Wireless Router...

1 Answer

Cannot connect to the internet on my laptop via the Belkin N300 wireless router.


WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Dec 26, 2010 | Belkin Wireless Share Router (F7D3302)

Not finding what you are looking for?
Edimax EW-7438RPn N300 Universal Wi-Fi Extender Logo

Related Topics:

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Edimax Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you an Edimax Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...