Question about RCA TruFlat 27F520T 27" TV

3 Answers

RCA HDTV Tru Flat 27"

All my channels are just a blue screen until I hit the format button on the remote. But if you change channels it goes back to a blue screen.

Posted by on

3 Answers

Re: RCA HDTV Tru Flat 27"

Mine just conked out . Cheap Chinese junk from Wallies

Posted on Apr 27, 2008

Re: RCA HDTV Tru Flat 27"

I resently had that same problem sound but no picture. what i did for mine is reboot the tv. unplugg it out of the wall for about 15mins to clear its memory. i plugged it back up and it worked fine.

Posted on Mar 07, 2008

Re: RCA HDTV Tru Flat 27"

I had that problem, it was the tuner.

Posted on Mar 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When I try to turn my RCA PURFlat 27" TV on, either with the remote or main button a blue line shows up in the screen and like within 2 seconds it goes off. What's the solution for this problem)?

My rca purflat doesn't turn on with the remote, batteries are good, it however turns on when I press the power button and then the channel button.

Sep 16, 2010 | RCA TruFlat 27F520T 27" TV

1 Answer

My flat screen tv dont turn on


My TV had the same problem. From my experience try when turning the TV on changing the TV channel on the TV not the remote.

Jul 26, 2009 | Proscan PS27500 27" TV

3 Answers

Fpa lock on my rca tru flat tv

here is my solution. somebody either needs to give me a solution without a remote or fuckin mail me a remote. and if i ever run into these RCA dipshits, ima beat some ***** *** for puttin the damn lock on there in the first place.
Jay and Silent Bob

Dec 26, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

RCA 27' tru flat sdtv- power light comes on- no display,no sound.

How do you unlock your TV from Protective Mode? There is a certain code that you need in order to unlock the Television. The technicians are saying that it went into Protective Mode, when it umplugged all by itself. I need the code so I can watch my TV again.

Nov 23, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Snowy picture with catv 1 mono on screen

is tv making some.. sound...please tell me..

Oct 20, 2008 | RCA TruFlat 27F520T 27" TV

3 Answers

Why does my RCA TV cycle through channels on its own?

this is the same type of problem happening with other rca models and I know it is the EPROM CHIP but why this is failing is either because of design flaw , dirty enviroment that they were made in , to much voltage or current to the chip or too much of a draw from the chip causing it to fail . Or even a random frequency from the IR sensor or its circut I'm still investigating and testing.
leave the tv unplugged for at least 3 weeks durring this time resolder any solder that don't look good , I did this and it lasted for about 6 months(always plugged in to the wall) before it started doing it again. model # 27v412t

Oct 04, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Need RCA univeral remote control code for Magnavox 27MS343S

Push in and hold code search button until it stays lit, then pushed the TV button, it flashes quickly. Then hit the number zero once, then hit channel up button until tv finally changes channel. Hit the mute button once to get it to store the code.

Feb 20, 2008 | Philips Magnavox 27MS343S 27" TV

2 Answers

Channel keeps changing

It sounds like a stuck button or switch. What happens when you hit the channel DOWN, does it still keep scrolling down?
Is this with or without the remote?
Have you tried it with the remote and or the TV?

Let me know whether you are changing the channels with the remote or the buttons on the tv and I can try to give you a couple more suggestions.
Mac =)

Feb 12, 2008 | Standard (CRT) Televisions

1 Answer

RCA 27V550T 27" TV

Problem fixed. I unplugged the TV for 20+ seconds, then before plugging it back in, I shorted ac plug prongs together with a metal key to ensure complete discharge. Plugged TV back in and used procedure to reset password WITH ONE CHANGE TO THE PROCEDURE.

With TV turned OFF press and hold <CLEAR> button on the remote while pressing <VOLUME DOWN> button on the TV, hold until TV turns on. When the menu appears DO NOT RESET THE PARENTAL CONTROL CODE as the user guide instructs. When my menu appeared it was in the SETUP screen on the LANGUAGE setting. It was set to SPANISH, using the remote I navigated to ENGLISH. Then using the remote I navigated up to GO BACK. Then I navigated to EXIT and hit <OK> button on the remote. All was back to normal.

Jan 10, 2008 | RCA 27V550T 27" TV

Not finding what you are looking for?
RCA TruFlat  27F520T 27" TV Logo

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66578 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides