Question about Washing Machines

2 Answers

Washing machine stopped no electrical power at machine

Checked all conections

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Did you check the breaker to see of it tripped? if not tripped i would then check to see if you got power at the outlet. if got power at the outlet. then check power cord plug to see if any of the three ends are still there if good remove power cord cover on the back of the machine with machine unplugged check the termal block is good and connections are tight. thats where i would do for now

Posted on Dec 11, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 373 Answers

Did you check the circuit breaker? Testtheoutlet with a voltage meter.

Posted on Dec 11, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Hotpoint Aquarius washing machine WMA58P will not empty.

Recheck your electrical connections. Check for power reaching the pump with a suitable tester. If there is no power then it might be the controller or that it might not be requesting the pump to operate.
Be patient...

Apr 17, 2017 | Hotpoint Washing Machines

1 Answer

No power

Obviously something electrical. Check for interlock switches - door closed, water overflow, etc. Check for power at the power supply "mains in" and output. Voltage regulator on PS board?
I'm told that these machines are worth repairing and can last 20 years or more with proper maintenance, so they're a good investment.
Sorry I can't be more specific, but I'm just sharing some possible things to search for.

Jan 02, 2014 | Miele Washing Machines

1 Answer

My washing machine stopped working in the middle of a wash. i checked the plug and fuse - no problem; electrical oulet - no problem. what do i do next?

If it will try and restart the wash if it stops in same spot new timer time. If you cant do anything but there is power of some sort check the switch where the door closes theres usually a plastic piece that presses this switch down make sure its still intact.

May 06, 2011 | Fisher and Paykel Washing Machines

1 Answer

Washing machine will not turn on.

Hi just read your posting.Have you checked the power point for power with a toaster or hair dryer?If there is power to the machine then there are 2 reasons why it is not powering up.1st-- the drain pump is open circuit 2nd the control module is faulty.1st empty the machine by hand so you can look underneath the machine by tipping it back far enough to see the pump.Now the pump will either have a red or black fan on it ,or you will see no fan and that means you have the new style pump.please reply with the type of pump you have and if you have or can borrow an electrical test meter and i can guide you step by step to find out if the pump is faulty or the controller or both.

Jun 02, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

My washing stopped working mid cycle. I checked

the timer is probably sticking (needs replacement) or lid safety switch stuck open. try restarting the load and if stops at the same place it is the timer unit, if it fills up with water and than stops - lid switch.

Mar 29, 2010 | Washing Machines

1 Answer

Stopped Dead

these machines only have 2 problems
dive coupling no wash or spin
or lid switch machine totallaly dead normally caueded by droping heavily & breaking the housing of the lid switch

Oct 30, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

76682 Answers

Brad Brown

Level 3 Expert

16037 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides