Question about Washing Machines

2 Answers

Machine lights was working fine half way through cycle lights went out and it has died .any suggestions please

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 65 Answers

Call the manufacturer's customer service. They should refer you to local repair technicians.

Posted on Dec 11, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Washing machine? Micro switch, door switch or brushes - if it's brushes may have taken board out - in which case it's scrap unless your lucky enough to have an inboard fuse or warranty etc

Posted on Dec 11, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Aqualtis 9l29i washing machine. It is working fine but the wash cycles are all ridiculously long.Put it on the quick wash yesterday,three hours later still washing!! Suggestions please?


1. Front load machines always have much longer cycles.

2. The machine you have has a time saver mode on most cycles.

3. Check with your local Ariston reps on the time various wash cycles should take with your model if this is not specified in the user manual, which it normally would be.

4. These are notoriously bad over priced machines which will give you trouble early in ownership and are expensive to fix. For half the price you can buy a good top loader that will give you at least twice the trouble free years of use and not run ridiculous wash cycle times.

Jan 03, 2016 | Washing Machines

1 Answer

Dishwasher died half way through cycle and will not restart. I checked the fuse box and everything is good there. Any suggestions


Could be a glitch in the control or switch board. Have you tried running a different cycle like Crystal or light wash to see if those cycles work?

Nov 22, 2015 | Dishwashers

1 Answer

Aq9l292i not starting


Hope your tried switching off the machine for half to one hour, to re plug. Machine might re-set.

Apr 17, 2013 | Hotpoint Washing Machines

1 Answer

I have an electrolux EWX14440W Washing machine,


could be your door interlock is faulty

Mar 01, 2010 | Washing Machines

1 Answer

Rinse and spin


there is a safety switch on the top...and when you close the lid it pushes down on that switch. investigate that switch and see if its just corroded or needs replacement...i have that same problem when i leave the lid open on my washer...then it works fine when i close it...so im figuring that your's thinks its still open. I hope this helps you out ! and give your wife a hug 8-)

Jun 05, 2009 | Washing Machines

2 Answers

Washing machine went bang and wont work. The plug fuse is fine and the washing machine light comes on but it wont work


It should be the machine that has died. If you're unsure you can do it, call your appliance store's technician. Do not open it esp. if it's covered by a service warranty. It will become void if you do. I had the same experience before and the technician really took out the machine and brought it back to their branch office.

May 27, 2009 | Washing Machines

1 Answer

99 300m Dies at just under half a tank.


This is clearly a fuel problem so I'm confused as to why you changed the coil. You may have several problems ranging from water or crud in the tank to a bad level sending unit telling you that you have that much fuel or a bad fuel pickup.

Feb 06, 2009 | 1999 Chrysler 300M

1 Answer

Brewing stops mid cycle


Sounds like dosage is too high and grind is too fine.

Rule of thumb with any saeco unit.

Do not grind any finer then 2 or your looking for trouble.

Open grinder, clean it out with a vac. Slapped it back on.

The reason it stops is grind is too fine, and the machine doesn't have enough pressure to pass threw the grinds, creates back pressure in the machine and the unit failsafes after a certain amount of time with and pressure.

Back pressure is what blew your boiler.

May 16, 2008 | Saeco Magic De Luxe Espresso Machine

1 Answer

Head unit died


AR U WILLIN TO SELL ANY PARTS OF IT

Sep 19, 2006 | JVC KD-AV7010 Car DVD Player

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Brad Brown

Level 3 Expert

16174 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...