Question about Konica Minolta bizhub Office Equipment & Supplies

1 Answer

Data imaging solution on c7000pro bizhub

Please help to find solution to data imaging problem on c7000pro bizhub

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Konica Minolta Expert
  • 224 Answers

7A00 Description Failed to arrive home
• Error of the imaging carriage home sensor. • Error of the carriage motor. Causes • Controller board (CTLB) • Imaging carriage home sensor (PS15) • Flatbed motor (M4) Remedy 1 Turn OFF/ON the main power switch. 2 Check CTLB for proper connection and correct as necessary. 3 Check PS15 and M4 for proper connection and correct as necessary. 4 Replace Flatbed unit. 5 Replace ADF unit. 6 Replace CTLB.

Posted on Dec 11, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bizhub c554e error code c4801


MFP detects simultaneous replacement of multiple boards. YOU REPLACED board and did not follow the service manual


Do not replace the printer control board and the SSD board at the same time. The backup data is lost and image failure may be
caused.

Dec 06, 2016 | Konica Minolta Bizhub C554 Color Copier /...

1 Answer

How do I fix error code c-6740 on Konica Minolta c7000pro


C6704 Description Image input time out
Image data is not input from the scanner to the MFP board (MFPB). Remedy 1 Select [Service Mode] - [State Confirmation] - [Memory/HDD Adj.] - [Memory Bus Check] - [Scanner-Memory], and conduct the memory bus function. 2 Check the connectors between scanner section and MFPB for proper connection and correct as necessary. 3 Replace MFPB. 4 Replace CCDB.

Dec 09, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

Bizhub C450 strange printing problem. Green data LED is flashing but nothing happens.


Did you try to change the IP address of MFP. Please change IP address of MFP and connect the PC you are sure not giving any problem. If its works fine then connect rest of the remaining PC's

Nov 15, 2014 | Konica Minolta bizhub C450P Laser Printer

1 Answer

Procedure For Installation Of Hard Disk In Bizhub 363


Procedure for Installation of Hard Disk in Konica Minolta bizhub 283/363/423 Photocopier Machines,

1-Get a SATA hard disk. NOTE: SATA HDD is supported in the above mentioned models. IDE or PATA are not supported.So get a SATA HDD.
b0f8452f-907f-4b9c-8507-0d05d0ef525a.jpg
SATA HDD have two main connectors. 1 is for Data and the other one is for power as shown in the image.Two separate cables are used.Data cable and the power cable.Get both the cables.Image of the cable is shown below.
bffe98cc-9b42-4878-b7d2-80a65e264546.jpgData Cable for SATA
107b626c-ac31-4927-b142-6dd8674309f2.pngPower cable for SATA Hard Disk
3-Connect the cables in their respective areas.

4-Now place the hard disk on its fitting. HDD mounting kit is fitted at the main control board of the machine.For this, open the back side cover of the machine and you will get the fitting.It will be on the main board in front of you. Now fit the HDD on its mounting and tight the four screws at its sides to keep HDD safe from shocks / jerks.

5-Now connect the data connector and the power connector to the control board.There will be two separate jacks for power connector and the data connector.

6-After fixing both the connectors to the main board, close the rear cover of machine with the screws.

7- Now turn the machine ON.

8-Go to the service mode and click on "SYSTEM 2"
9-Now click on "HDD" and select "ENABLE" and press "OK"
10-Now click on "state confirmation"
11-Select "HDD"
12-Now click on Format Hard disk.Select "Logical Format" not the physical format.Press "START" button and wait for few minutes.
13-When formatting is finished press "OK" and restart the machine.
14-Your new HDD installation is complete now and its ready to use for box operations.

Jan 12, 2014 | Minolta bizhub 250 Black and White Copier

1 Answer

Konica Minolta c450 Network Print- Data comes at the machine end but no print


does this happen with word , pdf, web pages, email? what other indication display on screen

Jan 02, 2014 | Konica Minolta bizhub C450P Laser Printer

3 Answers

How can i reset m2 bizhub 211


I Have a Konika Minolta bizhub 211. I had been trying this solution for repairing m2 call. but the code is appear till now. anyone help me. please give me solution step by step.
Thanks

Mar 05, 2011 | Sharp AR-5320 Black and White Copier

6 Answers

Konica Minolta bizhub 163 Display M2. and not functioning Photocopy. Please sugest me ?


Code M2 means your photocopier machine require maintenance.In maintenance some old parts of your machine will be replaced with the new one and all this will be performed by technical services representative.

Dec 29, 2010 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Bizhub C252


1. Touch the following code on the trouble code display screen.
Stop → 0 → 7 → 1 → 3 → 9
2. [*] will be displayed on the trouble code screen.
3. Touch [*].
4. The screen will be shifted to the data restoration screen to perform data restoration.
NOTE
• When the restoration is performed in a short time, data restoration screen may not
be displayed.
5. Check the message which indicates that the data restoration was successfully conducted.
Turn Main power OFF, and wait for ten seconds or more to turn it back ON.

Try this please and tell your tech support service to change job....
DaSoP from Greece!

Aug 05, 2008 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...