Question about Frigidaire Gallery 30" Self-Cleaning Freestanding Gas Convection Range - White

1 Answer

I have a Frigidaire oven that is over heating. I turn it on to 350 and the temp goes up to 500. Were is the sensor located and am I able to change the thermostat myself???thank you,

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Frigidaire Master
  • 1,249 Answers

My guess is it's in the oven box towards the top. looks like an ice pick and screws to the oven wall. Find where the wire feeds through the wall and remove the access cover behind it. It can be disconnected and checked for ohms. No model number, so replacement parts are easy to look up by model number. I have a Frigidaire oven that is over heating. I t - 25315439-zejmo41uy3tce5x43qikgza0-5-0.jpg

Posted on Dec 10, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
BNewberry
  • 93 Answers

SOURCE: frigidaire gles389ebd oven doesnt heat

Hello,
How long does it take to reach the temperature of 225?
Thanks, Bill www.applianceoutletservice.com     to chat live with me Thanks

Posted on Nov 05, 2008

appldoctom
  • 311 Answers

SOURCE: Replaced bake unit in Frigidaire

the pop is most likely an electrical short it will be in the back of the stove,that is unless your new element shorted .when cool you can run your hand around it and you should feel no blisters,smooth only.other wise you are doing a visiual inspection and looking for an obivous burnt wire/connection.God bless ,tom

Posted on Jan 04, 2009

Maytag317
  • 1136 Answers

SOURCE: Erratic/slow heating

Hi, It sounds like you need to change the on=ven ignitor. Even tho it glows, it is weak and will not open the gas valve consistantly. It is a very common problem. Please let me know if I can assist you with part# or how to replace the part.

Thanks
Vic

Posted on May 17, 2009

  • 1 Answer

SOURCE: I have a PLES389ECH frigidaire glass top stove and

I've got the exact same problem! HELP HELP

Posted on Jul 14, 2010

Daniel S
  • 4323 Answers

SOURCE: My Frigidaire FEFL77ABF range oven gets too hot.

Hi

This means a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is bad and should be replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope this helps...please post back for further assistance.
Daniel

Posted on Aug 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas oven doesn't get hot enough


Good Morning Friend,

I understand that your Frigidaire oven will not heat to temperature if you set it to 350 degrees. I see that you have to set it to 450 degrees for it to heat up, and then turn it back down to the desired temperature. Please try resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power, set the clock and try setting the temperature to 350 degrees. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jul 08, 2014 | Frigidaire Ovens

1 Answer

Thermostat Sensor?


Typically it is the temp sensor inside oven. It is poking out between the top burner ends at the back of the oven.

Apr 03, 2014 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

My Frigidaire FEFL77ABF range oven gets too hot. When set for 350, it goes to 450. High temp isn't consistent, so I can't adjust for it. Have cleaned oven and tried reset procedure - neither...


Hi

This means a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is bad and should be replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope this helps...please post back for further assistance.
Daniel

Aug 02, 2011 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Oven not heating up


Problem with oven sensor or control board (ERC). Oven sensor at room temperature should have resistance about 1080 Ohms, and it rises with temp rise.

Nov 26, 2009 | Kitchen Ranges

1 Answer

Oven won't pre-heat


This is a failed oven temp sensor. the control is not receiving a proper resistance signal from this sensor at this time. the control will shut down the unit if this is the issue. check the oven temp sensors connections form the control to the sensor housing for loose or worn contacts, if the wiring is ok, replace the temp sensor.

Sep 24, 2009 | Ovens

1 Answer

Oven door locks when in bake mode


bad sensor
your range is doing what its designed to do
it is ensing a runaway temp and locking down for sfety at 500 degrees
the sensor is the 3 in tube on the back wall

Sep 22, 2009 | Kitchen Ranges

1 Answer

Oven turn's on, keep's heatings at a higher temp.


This is failed communication between the EOC and the temp sensors located in the oven. i recommend testing the EOC(break point test on the pins) for its operational value and the temp sensors as well. replace any component that doesn't register.

I would also inspect the oven temp sensors for welded harness and fouled housings.

In most cases, this will be a EOC issue.

May 24, 2009 | Frigidaire 30 in. Electric Gallery Series...

2 Answers

Frigidaire oven F-10 error


HI. this is a oven temp sensor failure notice. you will need to check the wires leading from the temp sensor to the control. if the wires are in good condition and , the sensor harness is not welded, replace the temp sensor asap.

May 24, 2009 | Frigidaire FGB24S5A Gas Single Oven

1 Answer

Gas oven temp problem


HI thanks for your question. there is a oven sensor , located in the oven, top left corner. replace this part. thanks the appliance doc. please rate my answer. thanks

Oct 11, 2008 | Frigidaire Ovens

Not finding what you are looking for?
Frigidaire Gallery 30" Self-Cleaning Freestanding Gas Convection Range - White Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...