Question about Televison & Video

1 Answer

Samsung51" plazma tv gets no power to it what's the problem what part can i buy to fix it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,383 Answers

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Posted on Dec 10, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Philips Plazma 50pf7320/10


Most Large Flat Panel Televisions have components on the power supply go bad; if you know how to use a soldering iron, sometime they can be repaired, most common component failures are zener diodes and capacitors. If you can't solder, but can use a multimeter, you might be able to diagnose the issue; if you need a new power supply they can sometime be found on ebay for a reasonable cost... If it is anything more serious then that, it's not worth fixing... hope this helps...

Mar 15, 2014 | Televison & Video

1 Answer

Fujitsu siemens plazma tv remote control.trOld tv need RC


Set-up codes to check with Fujitsu brand TVs are, 1052 1192 1061 1345 1005 1408 1142 1195 1027 1051 1274 1231 1210 1110. Buy one remote control which have these setup codes to Fujitsu brand in their code list. If you wish to get more, http://electrohelponline.blogspot.com/ check this link. Setup code list to many popular brand TVs are given. Pull up previous posts there, either by its left side bar, or view it in Timslide option. Select and buy one among them according to availability.

Jun 28, 2013 | Fujitsu Siemens Plasmavision P55XHA30 55...

1 Answer

My 37" plazma went black


Hello.
Probably not. If sound still there that mean you have problem with sustain board/s and/or higher voltage part of power supply board. If you pay professional to diagnose it properly and fix it it should cost you $150-$175 diagnostics/labor plus about $200 in parts.
I would recommend to invest this money in new LCD or LED Panel TV.
Regards.
Russ.

Dec 01, 2010 | Televison & Video

2 Answers

Magnavox plazma 50 inch flat screen wont turn on


Power supply board is dead.Replaced the power supply board will solved this problems.Tries Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Mar 08, 2010 | Televison & Video

1 Answer

Samsung HPN5039 Plazma


check the orange capacitor C526 and C524...

May 22, 2009 | Samsung HPN5039 50 in. Plasma HDTV

3 Answers

My lg plazma tv is dead


i replaced a smps transrormer in power supply board and then it's ok now.

Mar 16, 2008 | Televison & Video

1 Answer

Plazma TV


There are several shutdown circuits on this unit. The X main or Y main are the usual suspects. Call 1-800-Samsung for a qualified servicer in your area.

Jun 07, 2007 | Samsung HP-R4252 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...