Question about Hardware & Accessories

1 Answer

Program the day OF THE WEEK for Monday thru Sunday. for start at 5:30 Pm & Stop at 10:00Pm

The instruction set for the "+" button is not clear. The user needs to know for the day range: Mon thru Sun, the sequence of "+" strokes required to define for the program the day range: Mon thru Sun, for both "on" & "off" statuus.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,089 Answers

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: I DON'T KNOW HOW TO

You posted under Intermatic HB88RC timer
If you have different timer, add a comment

HB88RC timer manual:
http://waterheatertimer.org/pdf/hb88rc.pdf

Here's HB88RC programming from the top:
Remove batrery from back of timer to reset timer and clear everything.
Re-install AA battery in timer so display will show, and you can program

Set clock:
Hold down clock button.
Press day button until current day displays.
Press Hour button until current hour displays.
Press min button until current minute shows.
Release clock button

Program timer:
Press PROG button until 1 ON displays
This is Event1 ON
Press Day button until selected day or days displays for event1 ON
If you want all week long, then press day button until all days show: MO TU WE TH FR SA SU
Press Hour button until 7pm shows >> this is event1 ON
Press Min button until :00 displays for event1 ON

Press PROG button until 1 OFF displays
This is Event1 ON
Press Day button until selected day or days displays for event1 OFF
Match days with ON time: so press day button until all days show: MO TU WE TH FR SA SU
Press Hour button until 12pm displays >> this is event1 OFF
Press Min button until :00 displays for event1 OFF

When programming is finished, press clock button to display current time

When programming is finished, press MODE button to select MODE > you want AUTO for timer programs to operate
Press MODE button once and this is manual override, and lights come on.
Press MODE button again and RDM displays, this is for random timer operation
Press MODE button 3rd time, and timer is set to AUTO
After setting MODE to auto, press clock button to display current time.

Plug timer into receptacle.
Plug lights into timer.

Add a comment any time.
A lot of folks have written in about this timer going bad and they have been unable to program the timer. Of course most timers work perfectly fine.

Posted on Dec 18, 2010

eugbug
  • 479 Answers

SOURCE: I have a timer model

The instructions are a=vailable at this web address:

http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/dt17c%20-%20english.ashx

Hope it helps!

Posted on Feb 21, 2011

SOURCE: Just installed the programmable timer

I test timers.
Some arrive defective, and some go bad quickly.
Industry standard is 1 year limited warranty.
All these timers have reset button that should restore functionality.

You posted under Woods digital programmable.
Open link to download on-line manual and read ez wiring steps.
http://waterheatertimer.org/Woods-timers-and-manuals.html#59028
This timer is reset by pushing reset button, without pushing any other button.
Some timers require on-off button to be pushed while pushing reset button.

I suggest turning off power to timer and see if that 'resets' timer.
Otherwise open link below and run through troubleshoot checklist, and also double check wiring.
http://waterheatertimer.org/Woods-timers-and-manuals.html#troubleshoot

If timer will not function correctly, then exchange for new timer.

Resourceful do-it-yourselfer can buy similar timer at Home Depot located near light fixtures and doorbells.
GE15086 -or- GE15071 with daylight savings time.
Advantage is ez exchange if problem occurs, and you give yourself extended warranty.
http://waterheatertimer.org/GE-timers-and-manuals.html#15071

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Posted on Mar 20, 2011

SOURCE: ZILLA POWER CENTER

The yellow outlets are controlled for 12 hours, and you can determine when those hours occur when setting current time.
http://waterheatertimer.org/GE-timers-and-manuals.html#zilla

Absolutely feel obligated to upvote the help.
Or take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Posted on May 05, 2011

SOURCE: Problem #1. On model

Thank you for very clear question, and timer identification.
1) I don't have repair for defective timer.
http://waterheatertimer.org/Intermatic-timers-and-manuals.html#DT300
http://waterheatertimer.org/pdf/DT300-series-manual.pdf

2) Choose DT300 format
#3 says to press-and-hold CLOCK button until display shows 24H or 12H
Then release CLOCK button.
Next press HOUR button to select either 12H or 24H
This lets you choose am-pm format -or- choose military-time format where 11pm is 23

3) Set current time
Press-and-hold CLOCK button throughout whole current time setting.
Do not release CLOCK button until current time settings are finished.
Next, press HOUR button, and then MINUTE button, and then DAYS button until current hour, minute and day display.
Then release CLOCK button.
If this step does not work, then timer has gone bad.
Replace with locally available Utilitec 155671 from Lowes or Westek TE06WHB from Target
http://waterheatertimer.org/Woods-timers-and-manuals.html#59377

4) How to set DT300 timer program for full week of operation.
Each program requires you to set program 1 ON time and program 1 OFF time
Be careful to avoid program conflicts and overlaps so timer works as expected.

For program 1 ON time, you press PROGRAM button until 1 and ON display.
Release Program button.
Then select hour, minute and days. In this case you want all days of week, so you keep pressing DAYs button until whole week displays: Mo Tu We Th Fr Sa Su

Then you set program 1 OFF time, you press PROGRAM button again until 1 and OFF display.
Release Program button.
Then select hour, minute and days. In this case you want all days of week, so you keep pressing DAYs button until whole week displays: Mo Tu We Th Fr Sa Su

If you set ON time for all days of week, and OFF time for Tu Tuesday, then timer will not work correctly.

5) Read manual and add a comment for additional help

Posted on Aug 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Understand the instructions for TS EE8


Following link has product manual that might match your timer:
Use + button at top of manual to enlarge print.
http://waterheatertimer.org/pdf/Argos-7day-Electronic-Timer-Manual-TS-EE8.pdf

Please add a comment and say if this manual matches your timer...fixya will send me email... and I will answer.

Include where you get confused.
You set current time first... that's the time that shows on your wristwatch right now.
You set day of the week... same day it is right now.
You set hour and minute.

The timer allows you to set up to 8 programs... you can set just 1 program or 2 or 3 etc.
Each program must have ON time
You set program 1 ON
Each program must have OFF time.
You set program 1 OFF
Each program must have a day or days of operation
So you might select monday ON at 10:10 am and OFF at 3:36 pm.
And other program for Tuesday ON at 10:45 and OFF at 4:00 pm.

When programming is finished, you set mode to auto for programs to run on the schedule you set.

Gene

Water Heater Timers Save Money

Feb 28, 2015 | Hardware & Accessories

1 Answer

Set date and time


I know this post is old, but maybe someone will benefit from this answer in the future. To set the time & date on a Southwestern Bell FT484 telephone, follow these instructions:

  1. Press SET button
  2. Enter 2 digit month and 2 digit day (1218 for Dec 18)
  3. Enter 1 digit Day code (1=Sunday, 2=Monday, 3=Tuesday, etc)
  4. Enter 2 digit Hour and 2 digit Minute code (0445 for 8:45)
  5. Press * for AM or # for PM
Summary: to program Thursday, December 18th at 4:45 PM, you will enter this sequence "121850445#". It does not allow entry for the Year, so you will need to manually adjust for leap year.

Hope this helps someone out there.

Mar 13, 2014 | Southwestern Bell FT-484 Corded Phone

1 Answer

I WOULD NEED SOMEONE TO TALK ME THROUGH IN PERSON , HOW TO PROGRAM THE TIMER FOR 8AM TURN OFF AND 8PM TURN LIGHT ON EVERY DAY OF THE YEAR - THE SAME TIME ...


If you want someone to talk to you, you will have to pay for phone help.

Here are the simplified instructions.


Press Mode to step thru various options, you only need to get to CLK.

Then set the hour, minute and day of the week first.

If you want the timer to go on & off at the same time for 7 days, you must program 7 times.

Good luck, Gary


Setting the Time of Day

Press MODE to go to the Clock (CLK) settings. The display will flash with 12:00 AM.

Press HOUR+ to stop the flashing.

Press HOUR+ and M+ to set the current time in hours and minutes.

Make sure that AM and PM settings are correct.

Note: The day of the week is shown at the bottom of the display. If you have not programmed the calendar settings,

be sure to also set the current day of the week while programming the current time. To do this, press DAY until the
correct day of the week is shown. The CLOCK settings are now complete.

Press MODE to go to the first PGM screen. See Fig.9

Use DAY, H+ and M+ buttons to set the days, hours and specific times that you would like the timer to turn ON.

(NOTE: Be sure the word ON is displayed when setting the ON time.)

Press NEXT ON/OFF to program an OFF time.
Repeat the same steps for all 7 ON/OFF operations, if required.

Aug 29, 2011 | Intermatic Inc. EJ500C Digital Wall Switch...

1 Answer

Hey i;m hector : MY PROBLEM / 7 DAYS SETUP NO WORK ; ( ej: TIME ON 8.00PM- TIME OFF 5.00AM( SEME DAYS MONDAY TO SUNDAYS?


Hi Hector.
You posted under ET171C8.
You have the timer in front of you, and whole manual cannot be repeated. So there are two options
1) Free option: Add a comment and say specifically where the programming is tricky. If you don't understand the buttons, or if display doesn't show, or if you can't find all days by pushing day button, or if you can't find the am pm choice.
2) Pay for fixya expert to walk you through each step via e-mail.

http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/et171c%20-%20english.ashx
http://www.intermatic.com/products/timers/electronic%20time%20switches/7%20day%2030%20amp.aspx

If display shows, then battery is correctly installed.

Instructions copied from manual:
1) RESET TIME SWITCH: Press the recessed RESET switch to reset the
microprocessor and delete any set point information which has been
programmed. NOTE: DO NOT press RESET after programming has
begun or you will lose all of your program information.
2) TO SET TIME AND DAY OF WEEK: Place the three position selector
in PROGRAM and the two position selector in CLK mode. Press the
HOUR, MINUTE and DAY buttons individually to select the current time
of day (12 hour AM/PM repeating) and the day of the week. Day 1 is
Sunday, day 2 is Monday, etc.
3) TO PROGRAM SET POINTS: Select PROGRAM mode with the three
position selector and OUTPUT mode with the two position selector.
Press the HOUR and MINUTE buttons separately to program the first set point time desired.
Press the DAY button to select the day the event is to occur.
Press the ON/OFF button to select an ON or OFF set point.
Press the ENTER button to enter that set point for the selected day.
Note that the ON or OFF indicator stops flashing only after pressing ENTER. If this set point is to occur for other days of the week, simply press the DAY button to select the next day then ENTER. Repeat for any additional days. Note that this allows you to utilize one set point for
any or all days of the week.
Then set timer to AUTO for programs to operate

Apr 26, 2011 | Intermatic ET171C8 Electronic Timer

2 Answers

Hey guys, the 15079 GE timer has 20 on/off settings. Are they for the whole week?


Eeeckles,

The timer you mention 15079 does has 20 on/off settings that can be set during a 1 week period that will then repeat each week. For example Setting 1 could be to come ON on Monday at 5:00pm and turn OFF Monday at 11:00pm while setting 2 could be to turn ON on MWF at 3:00pm and OFF MWF at 3:30pm.

You can find all of the UPDATE GE Timer manuals at the manufactures website: http://www.jascoproducts.com/support/timer-quick-start-guide.asp

Blessings!

Dec 31, 2010 | Jasco 15079 SevenDay TwoOutlet Digital...

3 Answers

I bought a utilitech three outlet outdoor timer and cannot get it to set. Now I cannot seem to find the instructions that came with it. Where can I download the instructions?


I bought one also but am taking it back today as I am not satisfied with the performance and the internal battery dies losing all programming. The instructions below are word for word from the manual but not all that clear. Since I can't post the diagram from http://www.thencc.com/westinghouse/LS/Instruction/T28499_TimerManual.pdf (if I can post links here), I substituted words in the "Set Mode" section instead. This is for the Utilitech 0149289 model and also applies to the Westinghouse and Stanley equals. Good luck.

3-Outlet Photocell
HEAVY DUTY OUTDOOR TIMER
Tri-Mode Digital Timer
3-Wire Grounded Outlet and Plug
6 in (15cm) AWG 14/3 SJT vinyl cord
Rated: 125V/15A/1875W Tungsten
60Hz


INITIAL USE:
Before initial use, please plug in your timer for at least 1 hour to charge the internal battery. After the LCD display appears, your unit will be ready for programming.

RESET:
Press the "+" and "-" buttons at the same time to reset your timer. This will clear all programmed settings.

SET CURRENT TIME:
Press and hold the "TIME" button to enter the current time. First, set the day of the week: press "+" or "-" button to set today's day.

Press the "TIME" button to enter the hour setting. Press the "+" or "-" buttons to set the current hour. Be sure that AM or PM appears correctly.

Press the "TIME" button to enter the minute setting, Press the "+" or "-" buttons to set the current minute.
Press the "TIME" button to finish setting the current time and return to normal display.

SET MODE:
Press & hold the "MODE" button to scroll between the different Mode settings:

Display Mode Explanation
Digital Timer On/Off at your exact
programmed times (Picture of clock inserted here)
Photocell Countdown Timer On at Dusk or On immediately,
Off after 1-12 hours (Picture of what looks like half sun on horizon)
Digital Timer + Photocell On at Dusk, Off at your exact
programmed times (Combined picture of clock and half sun on horizon)

SET PROGRAM:
After choosing your mode, set the timer program by holding the "PROG" button for 3 seconds, and then follow the appropriate section below.

SET PROGRAM: DIGITAL TIMER
The first setting is "PROG 1 ON" which should appear on the screen. Set the desired day of the week setting for your timer using the "+" or "-" button to scroll between choices. You can select each day individually, Monday to Friday, Saturday/Sunday, or the entire week. To have your timer turn On/Off at the same times every day of the week, be sure to push "+" until all 7 days of the week are lit up for both PROG 1 ON and PROG 1 OFF.

Press "MANU" to enter the "PROG 1 ON" hour setting. Press the "+" or "-" to choose the desired hour for your timer to turn ON. Be sure to cycle through until AM or PM appears correctly.

Press "MANU" to enter the "PROG 1 ON" minute setting. Press the "+" or "-" to choose the desired minute for your timer to go on.

Press the "PROG" button to enter the "PROG 1 OFF" setting. Repeat steps 2 & 3 to set your desired Off time.

You may now either press the "PROG" button to enter additional programs (up to 8), or press the "TIME" button (or wait 15 seconds) to store your program. Your timer will now show the current set time and is ready for use.

SET PROGRAM: PHOTOCELL COUNTDOWN TIMER
The first setting is "PROG 1 ON". Set the desired day of the week program by pressing the "+" or "-" buttons. You can select each day individually, Monday to Friday, Saturday/Sunday, or an entire week. To have your timer turn On and Dusk and Off at the same time every day of the week, be sure to push "+" until
all 7 days of the week are lit up for both PROG 1 ON and PROG 1 OFF.
Press "MANU" to enter the hour setting. Press the "+" or "-" to set:
Display Explanation
d Dusk to Dawn - On at sundown, Off at sunrise
d:01 to d:12 On at Dusk, Off 1 to 12 hours later
S:01 to S:12 On immediately, Off 1 to 12 hours later

You may now either press the "PROG" button to enter additional programs (up to 8), or press the "TIME" button (or wait 15 seconds) to store your program.
Your timer will now show the current set time and is ready for use.

SET PROGRAM: DIGITAL TIMER + PHOTOCELL

The first setting is "PROG 1 OFF". Set the desired day of the week program by pressing the "+" or "-" buttons. You can select each day individually, Monday to Friday, Saturday/Sunday, or an entire week. To have your timer turn On and Dusk and Off at the same time every day of the week, be sure to push "+" until all 7 days of the week are lit up for both PROG 1 ON and PROG 1 OFF.

Press the "MANU" button to enter the "OFF" time hour setting. Press the "+" or "-" to set. Be sure to cycle through until AM or PM appears correctly.

Press the "MANU" button to enter the "OFF" time minute setting. Press the "+" or "-" to set.

You may now either press the "PROG" button to enter additional programs (up to 8), or press the "TIME" button (or wait 15 seconds) to store your program. Your timer will now show the current set time and be ready for use.

MANUAL OVERRIDE:
Press the "MANU" button to choose the timer status:

Display Explanation
ON Continuously ON
OFF Continuously OFF
AUTO Timer will turn On/Off according to program settings

Dec 01, 2010 | Hardware & Accessories

1 Answer

Are the 7 different programs for 7 different days or are they exclusive?


There are 7 ON events and 7 OFF events
http://waterheatertimer.org/pdf/Woods-59028-59018.pdf

When programming the timer, you select individual days or blocks of days.
For example program1 ON time
Set the Hour
Set the minutes
Press the day key to scroll through the possible choices.
Then you set program1 OFF time
Set the hour
Set the minute
And then press the day key to scroll through the possible choices.

The choices are:
Each individual day
Monday thru Friday
Sat-Sun
Monday thru Sat
Monday thru Sun
Monday-WED-FRI
Tues-Thurs-Sat
Mon-Wed
Thurs-Sat

The key is to set the ON and OFF times for the same days or blocks of days
For example program1 ON is 8:00 am Mon thru Friday
Set program1 OFF for 3:00 pm Mon thru Friday

and then program2 ON is 8:30am Sat-Sun
program2 OFF is 5:00pm Sat-Sun

Program 3 ON is 6:00pm Tues-Thurs-Sat
Program3 OFF is 9:00pm Tues-Thurs-Sat

Program4 ON is 6:00pm Sat
Program4 OFF is 11:00pm Sat

Programs5, 6 and 7 might not be needed

The key is to make a chart of times before setting timer.
The chart will prevent conflicts in programming where the timer does not operate as expected.

Nov 08, 2010 | Coleman Cable Woods 59018 InWall 7Day...

1 Answer

Intermatic EH10: I can't figure out how to set a schedule of Sun - Thurs, 8am on, 10pm off and Fri & Sat, 8am on, 11pm off. I tried every day of the week 8am on, 10pm off and Fri & Sat 8am on, 11pm...


http://waterheatertimer.org/pdf/eh10-manual.pdf

The EH10 is 120V digital timer.
The timer offers the following days:
-All 7 days
-Monday thru Friday
-Saturday and Sunday
-Each individual day
-Blankday (day skipper)

If I understand your schedule:
You want
Program1 ON at 8am Sunday
Program1 OFF at 10pm Sunday
Program2 ON at 8am Monday thru Friday (with blankday on Friday)
program2 OFF at 10pm Monday thru Friday (with blankday on Friday)

Program3 ON at 8am Friday
Program3 OFF at 11pm Friday
Program4 ON at 8am Saturday
Program4 OFF at 11pm Saturday

I filled in the chart for you.
I left off the display.
I do not have this timer and don't know 100% how the display looks without buying the timer.

geno_3245_16.jpg

If you need more help on a specific step in the manual, add a comment and I will answer.

Nov 07, 2010 | Intermatic 7 Day Electronic Timer Eh10...

1 Answer

Cant change the time on my work phone Panasonic KX-T7630


Try this - PRESS PROGRAM
Press 0
YYMMDD
Day of the Week (0=Sunday, 1=Monday ..... 6=Saturday)
HHMM (12 hour)
0 for AM 1 for PM
Store
PRESS PROGRAM

If that doesn't work I have no idea sorry. But I did find you this just in case http://www2.panasonic.com/consumer-electronics/support/Contact-Us.4
Hope I helped Dr Reed

Apr 06, 2010 | Panasonic KX-T7630 Corded Phone

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5089 Answers

Hippy_dd

Level 2 Expert

112 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...