Question about Haier HLP21N Washer

1 Answer

Haier HLP21n blinking light error code.. Rinse and Spin lights blink...what does it mean?

None of the settings work. It starts up but does nothing, but after a few mins both the rinse and spin light blink and the machine beeps. It all started after I forgot to close the lid during the rinse cycle for a heavy wash cycle load. The machine filled up with water then started spinning in one direction, but did not stop after I closed the lid, so I turned it off and on again, then it just would not do anything except those 2 blinking lights. I did drain all the water out and try to run the machine again, but same error code. Does anyone know how to fix this. Thank you

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Haier Master
  • 1,253 Answers

This washer is a sanyo on the inside. When panasonic bought out sanyo and all its daughter brands, they started making parts not available for repairs. The service manual is here---> https://panasonic.encompass.com/shop/research_new/HAI/sm/HLP21N.pdf

Good luck!
This is also known as a sears proflex among other names.... Haier HLP21n blinking light error code.. Rinse and - haier-hlp21n-blinking-light-error-code-eqln1e0r5dvuapuxoxy4lmrd-1-0.jpg

Posted on Dec 23, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: spin cycle doesn't work

bad drain pump or clogged drain line. some units have drain trap you can clean,if so you can clean it out yourself but will make a huge mess if you don't pinch close the drain hose between the tub and pump.

Posted on Nov 18, 2011

  • 998 Answers

SOURCE: Haier HLP21N washer won't fill. Water runs right through from the faucet to the drain hose.

Is the hose in the sink or on the floor? If in the sink, it sounds like the pump is running all the time. If the hose is too low, it maybe syphoning out the water as fast as its going in.

Posted on Nov 08, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haier HLP21N Washer will not rinse, spin or drain. Last load worked perfectly, not even a hint of a problem brewing. Next load (a few days later) filled & washed per normal. And did nothing else. No...


Suggestion: In all probability it is your filter which is clogged. You did not mention you were periodically cleaning it out. I hv to locate where the filter is; meanwhile you can see as to where it is by referring to your manual. Will try to get back to you.

Jun 27, 2014 | Washing Machines

1 Answer

Haier HLP21E Top Load washer keeps beeping & blinking after water intake. It will rinse out the water when 'rinse' pressed. However it does not 'spin' but instead all three orange lights start blinking &...


No spin with alarm means the unit is out of balance.
The troubleshooting manual reads:
"The safety switch acts. The
spinning cannot work (The
WASH, RINSE and SPIN
indicator flash and alarm goes
off every 10 seconds). If
trouble cannot be solved after
alarming, it will alarm again
every few minutes."

To solve this the load must be balanced:

Make sure to level the machine on a solid floor. Also you may have to redistribute the clothing in the tub for even weight distribution.

Sep 28, 2013 | Haier HLP21E Top Load Washer

1 Answer

Mu washing machine is getting stuck on the rinse cycle. There is no error code coming up, just all of the light blink with the exception of wash and spin. I have unplugged it overnight and it didn't help....


Look under it for a diagnostic manual

You got codes or something there if it blinks

May have a bad control board

Need that service manual to start your testing

Sep 13, 2013 | Kenmore HE2 Plus Front Load Washer

1 Answer

How to tighten the belt on haier hlp21e


When it stops post here what blinking lights are on.
Belt should have some movement. If you hear the motor straining but the tub is stuck then it will be worn, hot and flaking.
The water pressure switch can stop the unit
The safety switch can also stop the unit for out of balance. I would reload the washer and check if level as well. Then see if you get the blinking lights.

Nov 22, 2012 | Haier HLP21E Top Load Washer

1 Answer

E25


hello,


All error codes start with the letter "E". An error code of E11 will have the five indicator lights flash once and the Start indicator light flash once.


Some models of Frigidaire washers come with a digital readout display that informs the operator of the unit's function and any errors.

Error codes indicate that a problem has occurred and should be addressed. Different models of Frigidaire washers may vary in their fault displays.

Some washer models use flashing lights at the unit's start, door lock, wash, rinse, final spin and control indicators to display error codes.



If the five indica

tor lights flash more than nine times, this signals a letter in the error code. The letter "A" stands for 10 flashes, "B" for 11, "C" for 12, "D" for 13, "E" for 14 and "F" for 15 flashes. An error code of EB2 will have the five indicator lights flash or blink 11 times, and the Start indicator light blink twice

hope this help?

thanks.

Oct 23, 2010 | Dishwashers

1 Answer

Turn on power hear it come on then turns it self off and power light starts blinking


Blinking light may be a error code----look closely and see if blinks in a sequence---3 blinks, pause 3 blinks or 5,5.

The blinking light means set is in protective shutdown, Do you see a sequence to the blinks?

I am here to help.

If needed, unplug set and plug it back in and try to turn on---watch for likely error code.

SD TECH

Sep 17, 2010 | Panasonic PT-56HX41 56" Rear Projection...

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

2 Answers

Looking for LED flashing light Error codes for FUjitsu AC


communications error
try resetting the breaker
this should clear the eprom

Dec 13, 2008 | Fujitsu 18C1 Air Conditioner

Not finding what you are looking for?
Haier HLP21N Washer Logo

1,490 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Are you a Haier Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...