Question about Garden

1 Answer

Have a 410 consaw, pull system keeps breakin, not the cord, but the inside of the pull system? Any ideas, have tried new ones but only last a day or so!shihl

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 23 Answers

Dear Mal, Which part of the recoil system is breaking, the pulley, the spring or the pawls? If it is the Pulley, there is a possibility that the cord is too thin and is overlapping/jamming in the pulley and then it splits the pulley. If it is the spring, it could be because you have over-tensioned the spring or that the cord is too long (once again because the diameter/thickness of the cord is too thin so it fits more times around the pulley) and when you pull the cord right out, it tightens the spring up so much, that it jams and either the end breaks off or the spring jumps out of its location. Let me know if any of those situations apply (or not) and we can get around to sorting it out.

Posted on Dec 12, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Husqvarna 135 chainsaw recoil prolem

im not so sure this will help you, except to laugh , let me just say this i hope not, but this one reminded me of one a guy brought to me one day he said it wouldnt start , when i tried to pull it over , it woulnt budge not an inch , after carefull exam of pull rope , i saw the cord had broken and this guy in a fit of frustration used his daughters jump rope to replace it , thats not gonna work , this guy had over six feet of pink jump rope jammed inside this thing , i dont know how he fit it inside but there it was pink and all , i replaced the cord for him (not pink) but did offer to repaint the case pink , he said great maybe i could get my wife to run it then !! long story short maybe the cord reel inside is rubbing on something like a loose bolt or screw they do come loose lots of times ya know

Feb 28, 2015 | Husqvarna Garden

1 Answer

Pull cord not grabbing

The Dogs inside the Recoil are worn or Dirty is my first idea. But it could also be a loose Recoil also (This happened to me and my Ski Doo XP.

I purchased a new Recoil just to find out that 3 of the bolts were missing. Got new bolts and tightened it up and returned the Recoil. Ski Doo's Recoil Rebuild Kits do not last very long.

Nov 12, 2013 | Polaris 2010 WideTrak 600 IQ

2 Answers

Have new ignition system, factory installed anti-theft keeps locking me o

Go to both fuse boxes, one under the hood and one under the dashboard and pull the fuses and relays related to anti theft devices.

Jan 24, 2013 | 1998 Pontiac Grand Am

1 Answer

Dell xps 410 recognize hdmi

Could be an issues with your adapter. What resolution are you trying to send to the projector? Try lowering your resolution.

Also, are the proper video drivers loaded on your machine?

Oct 18, 2012 | Dell XPS 410 PC Desktop

1 Answer

Hi I've got an 1986 kx 500 that keeps on breakin

do u hav the clymer repair book-shows complete rebuild details--u probly missed a vital step--lower end work is deicate and takes proper tools and technique--

Jun 05, 2012 | 2002 kawasaki KX 500

1 Answer

I cannot get the bobbin to wind on my Model 1260 Euro-Pro. It was working fine the last time I used it. Any ideas?

Good day!

please try this simple tips:

Good day!

A sewing machine operator can often help themselves when their machine does not operate properly.
Here are some simple instructions, which if properly used can save time and mechanics service calls.
This could be trouble;================Do this;
1.Top tension to tight================loosen tension 1 turn
2.Machine improperly threaded=========check threading
3.Thread twisted on guide post========"
4.Thread twisted out of tension======="
5.Take up spring bent or broken=======Check action of spring
6.Thread jumped off pull off finger===Check threading
7.Needle bent or burred===============new needle
8.Bad cone of thread==================try another cone
1.Bobbin tensionspring to tight=======Loosen tension slightly
2.Bobbin threaded wrong===============check threading
3.Bobbin wound to tight or uneven=====try new bobbin
4.lint or thread on bobbin case=======clean inside case
5.Lint or thread inside hook==========clean inside hook
6.Bobbin case nicked bent or burred===check/change case
1.Needle bent or burred===============change
2.Needle set in crooked===============Check
3.Thread jumped off take up spring====check threading
4.Thread jumped off pull off finger===check threading
1.Forming loops on top of cloth=======Tighten bobbin tension
======================================or loosen top tension.
2.forming loops on bottom of cloth====Tighten top tension
3.Bobbin placed in case incorrectly===remove and replace
4.Bobbin thread slipped from under====check threading of
tension===============================bobbin case
5.Lint or thread in top tension=======clean between tension discs

Thank you and good luck.

Jun 05, 2011 | Euro-Pro 1260DX Mechanical Sewing Machine

1 Answer

4 wire cord for Maytag lde 410

There is usually a metal strap or a wire from the enter terminal to the dryer cabinet. Remove and discard that. Attach the green (ground) wire the the cabinet. White (neutral) to the center terminal, and red to one of the other terminals and black to the other. (both are "hot" wires)

Feb 06, 2009 | Maytag Dryers

1 Answer

Lots of noise when laptop power cord is plugged in

You must be running on pc, or it sounds like you may have a ground loop issue. If you are running a mac, then bus power over the firewire should be enough. If your running on a pc, try getting a pcmcia card with 6 pin firewire ports. If not then your pc laptop will have to power the 410 via ac adapter. That means both should be plugged in tot he wall. Ive gotten that interference before, and gett it on any audio, whether im producing or playing itunes. I find the trick is to reset the 410 via the output window in the top right. It's right above the level knob. Also, try just installing the latest driver, with the 410 disconnected, then launch it from a different file path than the icon.

I still use it for the macbook pro, and its not always top notch. I bought it 3 years ago for 500, and i see what 500 buys nowadays.......MOTU!!!!

Keep me posted.

Dec 08, 2007 | M-Audio FireWire 410 External Sound System

Not finding what you are looking for?
Garden Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

john h

Level 3 Expert

12104 Answers


Level 3 Expert

76070 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides