Question about Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

How to remove the wash dome - Whirlpool Calypso GVW9959K Top Load Washer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 744 Answers

Hello James;


My name is Peter. I am a retired field service appliance technician.


On the bottom of the dome are 4 clips that you must push in on. Be careful not to damage the seal ring.


How to remove the wash dome - 25313034-owvzrvv5kslysm3izavclcrl-5-0.jpg

Posted on Dec 08, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the Bosch dishwasher flood control switch?


Look in the bottom of the unit with the rack out. You are looking for a dome shaped housing. That is the inlet and the flood control. If you remove the kick panel when you locate the dome, you can then look under the unit in that area to see the parts that connect to the device.

Feb 20, 2016 | Bosch Washing Machines

1 Answer

Have a top loading fridgidare washer just changed the belt now water will not stop and washer overflows


Your pressure dome hose may be kinked. Remove front panel. There is a hose that attaches from the tub to the console. This hose is either kinked or clogged. Remove hose clean the end and then blow into it when washer is filling If it stops and starts to wash than you have a clog where the hose connects to tub. If it does not stop you have a kink in the hose or the pressure dome switch is out.

If you need further assistance or have any questions please feel free to comment me back.

Jul 28, 2011 | Frigidaire Washing Machines

2 Answers

My Roper wash machine won't fill with water. You can hear it running out as it's trying to fill.


If you are right that the water is running out instead of filling then either the drain pump is bad and not forming a seal or the control panel is telling the drain pump to activate. BUT if you are not hearing the pump running then it is probably bad.

Jul 27, 2011 | Roper RAS8445KQ Top Load Washer

1 Answer

How to clean the domes on hearing aids


Take the domes off, wash them out or use a pipe cleaner to poke out the wax. If you have washed them, make sure they are thoroughly dry before you put them back on. When you put them back on make sure they are firmly on the receiver tip or you will be taking a trip to A&E to get it removed from your ear canal.

Jul 20, 2011 | RTO 1 Siemens Pure 500 Open Fit Hearing...

1 Answer

The clear plastic door cover of my Bosch front load washer has come loose at the top, so that when it spins, it vibrates. From the "looks" of it, seems like there are supposed to be 4 screws that...


Try sealing the dome onto the door with silicone sealant. Smooth it well into the inside of the door so that it will not be caught by the washing. Also smear liberal amounts on the outside to hold the dome in place, but smooth it off for appearance sale. Smoothing is best done with a wet finger to leave a good finish.

Mar 11, 2011 | Bosch Washing Machines

1 Answer

Remove Agitator and floor plate


Remove the agitator dome by pressing on the 4 snap ins on the bottom of the dome and wash-plate. Remove the bolts from the wash-plate and lift it out. Here is a exploded diagram of the assembly.

Jan 29, 2011 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Pressure clog


hi..
This is a faulty water valve assembly. replace asap if possible. the embedded water pressure sensor is damaged..

thank u
rate me fixya

Jun 01, 2009 | GE Washing Machines

1 Answer

Calypso


If you have already removed the outer washplate, the inner wash plate should just lift off the leveler and u-joint. The washplate dome refers to the center cone that fits on top of the outer wash plate. This piece comes off by inserting a screwdriver in the slots along the sides and gently prying to release the locking tabs. The mounting bolts that secure the outer wash plate also secure the inner wash plate to the u-joint assembly. There is a seal under the inner wash plate that may be holding it on. I don't know of anything else that would be holding it in place. Searspartsdirect.com has an excellent exploded view diagram of the wash plate and components that you may refer to provide you with a perspective on how everything fits together. I hope you find some of this information helpful. Please post back and let me know if you are still having problems.

PS You may have to resort to using a rubber mallet to lightly tap on the inner wash plate to knock it free.

Sep 28, 2008 | Kenmore Elite 21086

1 Answer

Tub


Ok pull the dome off using the slots on the dome to remove, this will expose six bolts which come off using a 3/8 or 1/2 on rebuild units. This will allow you to carefully lift the wash plate to expose the underside, there is a post on the nutate dome and a hole that matches locate this as you move it so alignment is easier. Carefull not to remove the leveler, or the brown dome:) after you get your cards and scoop some water replce the plate like putting a tire on a truck.

Sep 02, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Washer won't stop filling


Remove the pressure switch hose and blow into it. Is it hard to blow through?
In the bottom right rear of the outer tub there is an air dome where the other end of the pressure switch hose is connected. The air dome can become clogged and prevent the pressure switch from working properly.
Also inspect the hose for any cracks splits or pin holes.
To access the air dome remove the cabinet shell as follows:

I will skip console removal as is seems you already know how...

With the console lifted;
1. You will find a lid switch connector (white in color). Unplug the switch from the connector.

2. There will be two brass colored clips. Place a flat blade screwdriver straight down into the opening on top of the washer and into the groove of the clip. Push the screwdriver down and away from you and the clip will release.

3. Open the lid of the washer and place your hand under the front rim of the opening (DO NOT grab the wash tub). Tilt and slide cabinet forward to remove.

In the bottom right rear of the outer tub you will find the air dome.

If I can assist you further, please let me know
reg501
The FixYa Team

Jun 22, 2008 | Washing Machines

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...