Question about Exercise & Fitness
I have the 2 manuals that came with it and have successfully increased the time until it stops etc but can see no options to increase the max speed.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This seems to be an issue with Signal Generator.If you have a problem with the signal generator, your speed will be erratic with either a person on the machine or without a person on the machine. You may even get a speed error code from the unit.
The procedure to check the same is :-
Let me know, if need further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Posted on Oct 12, 2009
If it reaches 250km then I suspect that the upper electronics is not functioning properly contact the distributor of Stex and If under warranty they sould cover it,but send out a servicer
Posted on May 06, 2010
Error 26 is what's known as a Motor Pulse Width Incorrect. It basically monitors the sensor signal and verifies that it's appropriate for the requested speed. If your machine uses an infrared sensor, check the line of sight between the optical eye and the sensor target, an array of black and silver wedges arranged like a pie. Ensure that it is 3/16" apart and that it's pointed at the larger point of the wedge section. Use an electronic cleaning compressed air cleaner to blow out any particles that could block it. Have a close look at the target, if it's torn or badly scratched, it will need to be replaced.
If the machine uses a hall effect sensor (magnetic) ensure the distance between the flywheel tooth and sensor is 3/16".
You can sometimes get this error if the speed sensor is faulty, but usually it will happen without you even touching the controls at that point because the lower board isn't receiving any signals from the sensor, or you will get a different error code.
Posted on May 28, 2010
I will try to help you, use the patience, carefully and basic tools.
If you need further assistance, please reach me, sincerely. God bless you.
with this you must fix it.
MANAGUA, NICARAGUA. C.A.
Posted on Oct 26, 2011
Tips for a great answer:
Dec 20, 2016 | True Technogym Excite Run 700 Treadmill
Sep 17, 2016 | Exercise & Fitness
Jan 25, 2013 | Exercise & Fitness
Jan 20, 2013 | Motorcycles
Jan 20, 2013 | Motorcycles
Nov 27, 2012 | True Technogym Excite Run 700 Treadmill
Jul 20, 2012 | Exercise & Fitness
Jul 10, 2009 | TEKK Exercise & Fitness
39 people viewed this question
Usually answered in minutes!