Question about Televison & Video

Open Question



Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 242 Answers

SOURCE: power inverter

Most likely a fuse. Check for a fuse on the inverter itself or one inline with the plug. Usually you can screw off the tip of the plug and replace the fuse inside.

Posted on Oct 24, 2008

  • 1 Answer

SOURCE: cigarette lighter adapter stopped working

I am not specifically familiar with the wiring on your vehicle, but i would say there is still a blown fuse, or the wiring going to your power-port/lighter has shorted.

Posted on Dec 06, 2008

  • 14 Answers

SOURCE: I am looking for the user guide in English of an

You can download the manual from here
ELECTROLUX service manuals and owner's manuals download.avgnotice { width: 320px; font-size: 7px; line-height: 7px;}.avgimage { height: 7px;}.avgborder { border-color: #00A120; border-style: solid; border-width: 0 3px; font-family: Arial, Helvetica, sans-serif; font-size: 10px; line-height: 13px;}.avgsep { border-color: #C0A8A6 #C0A8A6 #FFFCF7 #FFFCF7; border-style: solid; border-width: 1px 0; font-size: 0px; line-height: 0px;}.avgtop { text-align: center; background: #F4FBF4 repeat-x url(chrome://searchshield/content/background_top_green.gif); padding: 0 5px; height: 30px;}.avgmiddle { background: #C3E5CA repeat-x url(chrome://searchshield/content/background_middle_green.gif); padding: 5px 10px; word-wrap: break-word; overflow: hidden;}.avgbottom { background: #00A120; padding: 10px 5px 0 10px; border: 1px solid #00A120;}.avgbottom td { font-size: 10px; color: #ffffff;}a.avgbutton { color: #0000ff; display: block; padding-top: 3px; width: 69px; height: 20px; text-align: center; background: no-repeat url(chrome://searchshield/content/click_here_green.gif);}.avgtitle { color: #00A120; font-size: 11px; font-weight: bold; margin-bottom: 8px;}.avgnote { font-size: 9px; font-weight: bold; padding-top: 5px;} --> Safe: This page contains no active threats. Explanation:
It is safe to proceed to this page.
IP Address:
   Country Code:
Scanned on: 03/27/09 10:45:13
(0.66 seconds to scan this page)
Ratings are provided by AVG. Site owners please contact AVG Technologies for questions. Keep up to date with the latest AVG news and updates. Visit the AVG website.
click here Get our most complete protection against online threats. Get AVG Internet Security today. Find out how. click here ')" id="XPLSS_1158028860U1" src="chrome://searchshield/content/safe.gif" border="0" hspace="5" />but it will cost 9.99.You can download it for free from other sites but they only have the french version.

Posted on Mar 27, 2009

  • 558 Answers

SOURCE: Troubleshooting main board.

Three things to look for in service with LCD monitors,
1 bad capacitors
2 Bad transistors for the back light feeds
3 bad ic pulse chips for the Non function circuit
you will not find schematics unless you peruse the patent office records, reverse engineer the circuits and you will have a schematic
when the main chip fails on the vga board its time to buy a new vga video board,
sounds like your board may be suffering a bad IC telling the main chip the power is OK

let me know how it goes.

Posted on Apr 05, 2009

  • 76 Answers

SOURCE: Freedom 20 stops passing good AC input after about 15 sec.

This unit does have an idle mode where it will not output without a load. What I am unsure of is if this exists only for invert mode or for both invert and pass through. Try reprogramming the remote to eliminate the idle feature and then see what happens.

Posted on Aug 12, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

1992 Honda Accord EX 2 Door. Dome light stopped working, Rear window defroster stopped working, Headlights on chime stopped working, Intermediate speed on wipers stopped working......Replaced ICU unit on...

why not use a meter, and the schematic to find the reasons
the dome light works in many ways,
the head light warning uses 2 inputs to do that "logic"
and 2 ways, key left in
and exiting car with HL on.
so the door switches are bad?, the FSM tells you how to fix this.
no FSM,? no schematic,
try, its there. every word. and how to do tests.

a bad fuse/ just because they look good , don't make them good.
they can have hair line cracks, we test them.
but if they look bad, they always are.... no lie that. (no china fuses)
and the ICU may need 2 or more fuses good to work
that becomes clearer with a real schematic. hard facts.

seems to me you lost power. to ICU. or?

the ICU can fail for many reasons, mostly not the ICU as many have found. (vast posts make parts sellers rich with $175 a pop)
shorts. top the list. and blow fuses. not tested
there are 2 ways to test a fuse.
ohmmeter (called continuity tests) using any DMM
or in circuit, 12v on both sides. (super easy to do and is rubber meets the road test)
(or even store bought fuse testers, useless to me with any DMM)

Oct 17, 2013 | Honda Accord Cars & Trucks

1 Answer

My 2000 Ultra Classic when riding the power goes completely out, engine and all. The run is about 20 to 30 minutes when everything stops. This doesn not happen on all runs. I wait about 2 minutes and...

When you're saying "everything stops", do you mean everything electrical stops? If that's the case and it restarts in about two minutes, it sounds like something is tripping your main circuit breaker. I do not have a schematic for your bike but it has to be something that is not protected by the smaller fuses. If it were, the fuse would blow before the main tripped out. The main circuit breaker should be located right there with your other fuses. It'll be a metal can like device about a half inch wide, a half inch tall, and about an inch long. It should be 30-40 amps rated. Whatever the rating is, do not change it as it's designed to protect your wiring harness. It may have just gotten weak and needs to be replaced but this is rare. Have you added anything electrical lately? This could be just enough to "trip it over the edge".

Good Luck

Aug 09, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Need help with 2000 grand prix stop lights. power good at the fuse, power wire good from fuse box to stop light, brake pedal switch works and still no stop lights..

Look for a broken ground wire at the back of the car!

You ran the power all the way down to the bulb which means there is only one thing left. The ground lead!

You can try grounding the brake light socket with a test light or a lead from your multitester to check it.

Nov 29, 2009 | 2000 Pontiac Grand Prix

1 Answer

My husband claims my power inverter shorted out

not likely, it would have blown the fuse before it caused any damage, especially to an unrelated system.

Nov 22, 2009 | 2000 Toyota Sienna

1 Answer

Can't get power to my RoadPro 1500 DC to AC Power Inverter

I have had this same problem with several power inverters over time. The problem is usually one of three things.

Those starting with the simplest.

1. Too much current being drawn on the inverter.
Solution (Check appliances that are plugged in and make sure they are not drawing more than 1200 watts. If they are unplug the appliance that is using the most current and get an inverter that is more suited to your power needs.)

2. Some power inverters have fuses built on to them. Sometimes multiple fuses. Sometimes, one fuse may burn out leaving one intact. When this happens even small items draw too much current and over load the inverter.
Solution (Replace the fuses)

3. Improper installation. Inverters draw a lot of current. You must use the propper wire size for the inverter. I would recomend at least an eight guage wire directly fused and hooked directly to the battery. Of course like with all things the bigger the wire the better the flow of electricity.

If it is not one of those things stop into a truck stop electronics shop and have the person diagnose it.

Hope that helps.

Jan 20, 2009 | RoadPro AC/DC Power Inverter 2000/5000w

1 Answer

2000 venture van side power door will not open - both disabled

Click on the link.
If you think the problem is a fuse or circuit breaker, I see three fuses and a circuit breaker. Use a test lite and check voltage at circuit breaker and fuses, some are hot all the time, I believe one goes hot with the key on.

Sep 09, 2017 | 2000 Chevrolet Venture

2 Answers

Drivers side power window needs rewired. can I just get the wiring schematics for this

1. Go to ...
2. Enter the following as the code: pl249412345678
3. Click on Auto Repair Reference Center near the top of the page
4. And you're in! find your model, year, make etc...

They have wiring diagrams for the power windows for the Safari along with a lot of other good manuals and diagrams.

Aug 04, 2008 | 2000 GMC Safari

2 Answers

Kenmore dryer stopped working, start button does nothing

need the model # from the unit should be where the door closes to the CYE4000AWW is not a Kenmore Model

Jan 21, 2008 | Magic Chef CYE4000AWW Electric Dryer

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5342 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides