Question about Sanyo Televison & Video
0271,0277. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
Posted on Dec 06, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
0178 will work but you have to keep the set-up button pressed down for more than a few seconds after you press TV on your cox remote. (You will see the tv button light up 2 or 3 times after pressing it and holding the set-up button down)
Posted on Feb 19, 2008
There is no code!!! -- Solution...You have to buy a universal remote with learning capabilities. I’ve ordered one that will not only learn off other remotes but can handle 10 components also. I got it from 10x it’s called the iconRemote control…if you call the company they will give you a discount (but you have to call them and ask) AWESOME!
Posted on Mar 01, 2008
SOURCE: ilo 32hd tv
My TV was doing the same thing. we could turn it on at the tv, but the remote nor the tv would allow us to change channels. we purchased the tv approx. 1 yr. 4 months ago, and have only used it for approx. 6 months. Fortunately, we did buy the 2 year extended warranty from wal-mart for an extra $58. before we had found the reciept, when we called ilo, we were going to have to pay to ship the tv to them, then pay $150 to have it fixed. Since we have found the receipt, we called the number on the bottom of the reciept, no hassel, they are sending us a prepaid postage box to return it, and will hopefully have it back soon. However, in leu of reading all of these forums, we will be hooking that tv up to a cable box so that we do not have to use that remote, and the tv will stay on one channel. this whole this has been a nightmare!! we have never had a problem with wal-mart products until this. right after we started using the tv, we kept getting an encrypted channel error, that would not allow us to do anything with the tv either, after reading these forums, we were able to fix that problem. before we knew about these forums, we tried to take it back to wal-mart, they pretty much told us we were s.o.l. until we found the receipt. so i wish everyone luck on these expensive peices of junk. i know that i will do more research next time!
Posted on Mar 26, 2008
SOURCE: moxi remote control
The "universal code" 9910 is just the first step in doing a program search. Hold down the MOXI and OK buttons simultaneously until you get the double blink. Then enter 9910 and it will blink twice again. Then begin alternately pushing MUTE and the up arrow (above the OK button). Pushing the up button effectively cycles through the codes and pushing MUTE tests the current code that it is on. Do not go too fast because when you finally push MUTE and it actually mutes (or unmutes) your TV, you must push the OK button to store that code. I just performed this procedure and my first positive code that I stored only affected the mute and volume settings on my TV and would not turn the power on or off. If this happens to you as well, repeat the above process and just skip over the first positive you get until it mutes (or unmutes) your TV again.
Posted on Nov 15, 2008
SOURCE: need code for remote control
To program a TV you can use the code search option. You do this by making sure the TV is turned on then point the remote at the TV then press the TV button once, then press and hold down the set button until you see the RED l.e.d light blink twice, then enter the code 991. Next press the power button then the TV button continue doing that until the TV turn off, when it does press the set button. Press the power button and the TV should turn on again.
Posted on Mar 25, 2009
Tips for a great answer:
Sep 16, 2015 | GE Televison & Video
Oct 01, 2014 | Time ESPN College GameDay GameChanger 0000...
Sep 11, 2014 | Universal Remote Control Televison & Video
Jun 08, 2012 | Sanyo Televison & Video
Jan 16, 2011 | Televison & Video
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: