Question about LG Universal Remote Control For AKB72914222 AKB72915244 AKB72915246 BD Home Theater System 3D LCD LED TV

1 Answer

How do I get remote infared woking tried new batteries

Was working intermitadly with old bateries' replaced them with. New batteries

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • LG Master
  • 73,619 Answers

Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Posted on Dec 06, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Universal remote not transmitting


Universal Remotes are so inexpensive that you are better off getting a new one than to try and spend the time to fix the remote. But here is some things to consider.... Did it STOP working when the batteries went dead? Have you put in the NEW CODES (normally on the Back of the Remote) to communicate with your equipment? Have you set up the Remote yet? You can not SEE Infared, how do you know it is not sending out a Signal?

Start by removing the Batteries and replacing them with new ones (unless you can measure the output of the Batteries with a Multi-meter). They should be close to 1.4 volts. Because a light comes on does not mean it is strong enough to operate the TV or other equipment.

Mar 01, 2014 | Universal Remote Control Televison & Video

1 Answer

Remote doesn't work and repairman said it is the infra-red receiver inside the TV. it is only 10 months old


Still under warrenty why didn't u call sharp,get a new remote often the remote are dead.Not the infared board in the tv.

Jun 22, 2010 | Sharp Aquos LC37D44U 37 in. LCD HDTV

1 Answer

I want to get a replacement remote, mine is no good, installed new batteries and still nothing, very disappointed!


the polarity of the battery is good? the old batery was leak? try to find in you area a similar remote or universal remot if you put the right battery

Feb 14, 2010 | BUSlink LT-15V3 15 in. LCD Television

1 Answer

Remote control not working have put new batteries in and still no good.


Please check & ensure the infrared is emiting from the remote control. Though we cant see this infrared beam with bare eyes, there is a trick to do so in http://www.unique-stuff.co.cc/fixing_remote_control_check_infrared.html Most of the problems is weakened infared beam. Replace the batteries when needed. Hope this fix the remote control problem.

Jan 17, 2010 | ViewSonic N2635w 26 in. LCD Television

1 Answer

The remote is not working the tv. I changed the baterys and it will not work the tv know. The tv is Memorex (MT1192A)


Please check & ensure the infrared is emiting from the remote control. Though we cant see this infrared beam with bare eyes, there is a trick to do so in http://www.unique-stuff.co.cc/fixing_remote_control_check_infrared.html Most of the problems is weakened infared beam. Replace the batteries when needed. Hope this fix the remote control problem.

Jan 17, 2010 | One For All URC-3021 Remote Control

1 Answer

We have a ge universal remote control for our tv and it has been working and all of a sudden it does not work - we put new batteries and that did not work


Please check & ensure the infrared is emiting from the remote control. Though we cant see this infrared beam with bare eyes, there is a trick to do so in http://www.unique-stuff.co.cc/fixing_remote_control_check_infrared.html Most of the problems is weakened infared beam. Replace the batteries when needed. Hope this fix the remote control problem.

Jan 03, 2010 | Directed 434MHZ Remote Control

2 Answers

We have a proscan tv and the remote dosent work at all


try a universal remote or replace with new origional remote you can order. If no remotes work on tv, your infared sensor may be faulty

Aug 28, 2009 | Proscan 26LB30QD 26 in. LCD HDTV

Not finding what you are looking for?
LG Universal Remote Control For AKB72914222 AKB72915244 AKB72915246 BD Home Theater System 3D LCD LED TV Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...