Question about Boating

1 Answer

How do i recalibrate the st4000 tiller for the starboard side

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 693 Answers

Hi Tina!

The ST 4000 is factory default to the starboard side. If you require a port side mount, see chapter 7 of the manual to which I have provided a link below. (3.16 MB) About halfway down the page.

The text reads as follows:

OPERATING SENSE REVERSAL

Press +1 and -1 keys together for five seconds.
The display will then show port or starboard and the phase of the autopilot will automatically change.
The control head will automatically revert back to its normal operation within 5 seconds.
Note: This should normally only be required if the actuator is port hand mounted.

Hope this helps.

(Sorry about the orientation of the manual, it's pretty cheesy coming from Raymarine.)

-Steve

Raymarine Retired Autopilot Manuals

Posted on Jan 15, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost my starboard software cd


Software Download

Need to upgrade your software, or maybe you have misplaced your original disk. Click here and follow the procedure to request a downloadable version. You will need to have the serial number(s) of your product(s) to hand.

Software Download

Nov 04, 2014 | Hitachi StarBoard FX-77

1 Answer

Were can I find serial no on 9.9hp mariner


Hi!
Your serial number is located on the lower starboard side of the engine block. A serial number is also located on the starboard side of the swivel bracket.

Here's a link to your service manual if you need it.
Hope this helps.
-Steve
Boatinfo Mercury Service Manual for 9 9 15 hp

Sep 04, 2014 | Boating

1 Answer

Hi where is the relay on a 90hrs power outboard


Starboard side under plastic cover or mounted on tray starboard side

Jul 09, 2013 | Light Outboard Motor Boat Bass Fishing...

1 Answer

Turns hard to starboard when in auto


Verify that it is configured for your installation. Some units can be installed either on the port or starboard side, and they have to be programmed accordingly. Verify this in the user's manual.

Jul 04, 2013 | Raymarine St8002 Smartpilot Autopilot...

1 Answer

My st4000 wheel pilot turns on with the boat, rudders center up like normal, but then if I push the AUTO button the power fuse blows


Are you sure that you've got the correct value fuse in? Check that the motor/gearbox assembly will turn; ie, it's not siezed up. Check the wiring to the motor to make sure that there's no short circuit anywhere.

Nov 07, 2010 | Raymarine ST4000 GPS Receiver

1 Answer

Where do I find the parts number for the clutch lever and pin for ST4000 to order from a marine store?


The clutch lever for the black wheel unit st4000 has Autohelm reference N011,see at Westmarine,is sparepart is available

Sep 16, 2010 | Raymarine St 4000 Wheel Drive E12093

1 Answer

Where do i find the serial number on my fx duo board


Take your cell phone and put it on it's camera setting. Then go to your Starboard and take a picture of the lower left of your Starboard (on the corner--facing the floor). That is where you will find the serial number. Look at the picture--there it is-the serial number!

Sep 09, 2010 | Hitachi StarBoard FX-77

1 Answer

I HAVE A 1997 AUTOHELM ST4000 AUTOPILOT AND THE


GLUE THE SMALL POSTS EXACTLY IN PLACE AS THEY BROKE OFF ,DRILL A HOLE VERTICALLY THROUGH THE POSTS ,SAME SIZE AS HOLE IN THE SS WHASHER, (HOLE OF THE SCREWS)ALL THE WAY THROUGH THE BACKPLATE ,INSTALL A STAILLESS SCREW WITH HEAD ON THE REAR OF THE BACKPLATE AND NUT ON THE WASHER SIDE TRIM TO EXACT LENGHT USE LOCKTITE FOR NUT.

Jan 05, 2010 | Raymarine St 4000 Wheel Drive E12093

2 Answers

Service Manual for Autohelm's st4000 Wheel Drive Autopilot


Hi, If you are looking for Autohelm service manuals you may find them at http://sdmarine.online.fr/Service%20Manuals/Autopilot%20Systems/

Dec 18, 2009 | Raymarine St 4000 Wheel Drive E12093

1 Answer

COLOR AND PLACEMENT OF LIGHTS ON EXTERIOR OF HELICOPTER IE WHAT COLORS GO ON PORT AND STARBOARD, FORE AND AFT.


When the helicopter is facing away or heading away from you, PORT is RED and is on the LEFT side. Starboard is on the Right and is Green.

Aug 14, 2009 | Jumbo RC JUMBO HELICOPTER

Not finding what you are looking for?
Boating Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Boating Experts

Steve
Steve

Level 3 Expert

693 Answers

ray gallant

Level 3 Expert

45324 Answers

Fabrice Wolters

Level 2 Expert

320 Answers

Are you a Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...