Question about Microsoft Windows 7 Home Premium 64BIT Operating System Software OEM DVD

2 Answers

My Intel RST is NOT running every time I boot up each day. Your answer didn't solve the problem. It shows in Services, it is running and on Automatic??? This just happened recently...

I have researched this and am not finding any way to get it running, but in my task bar, the little icon says "Intel Service is not running." Why would it just stop? Thanks!

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Microsoft Master
  • 1,381 Answers

Hi ,
Maybe this will work :
Right clic on My computer
Clic on device manager
double click IDE ATA/ATAPS Controllers
double click Intel(R)ICH9M-E/M SATA AHCI Controller
open driver tab
update driver
search for driver on-line and wait for Windows to install new driver .
Regards .

Posted on Dec 05, 2014

Testimonial: "This did not work...already have the most updated driver, it says. Also, in task manager, it shows "stopped." Do I need this?"

  • 6 more comments 
  • fanaudi
    fanaudi Dec 06, 2014

    Hi again ,

  • fanaudi
    fanaudi Dec 06, 2014

    Did your issue occured recently ? Haven't you tried a retore operation ?

  • Dorothy F Stevens
    Dorothy F Stevens Dec 06, 2014

    Yes, just this past week. Was thinking about a "restore."

  • Dorothy F Stevens
    Dorothy F Stevens Dec 06, 2014

    If I uninstall the program, where do I get it to "reinstall", is it on my Windows disks somewhere?

  • fanaudi
    fanaudi Dec 07, 2014

    It should come back automatically . Have you actually restored Windows to an earlier date ?

  • Dorothy F Stevens
    Dorothy F Stevens Dec 07, 2014

    No...hate to do that if I don't have to. Is that best?

  • fanaudi
    fanaudi Dec 08, 2014

    There is no absolute guarantee this will solve your issue but it's worth a try since you can't remember what happened to your pc to provoke it . The only risk would be loosing some download or program you have installed after the restore point .

  • Dorothy F Stevens
    Dorothy F Stevens Dec 08, 2014

    Ok, thanks much. I checked out the "affect" on programs...only one which I removed, so will try this.


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 3 tips or uploaded 2 video tips.


    An expert whose answer got voted for 20 times.

  • Expert
  • 128 Answers

Open control panel and select administrative tools

My Intel RST is NOT running every time I boot up e - 25308627-3wpqtp00zodw0jp5gb00c3yk-3-0.jpg

now select services


find intel rapid storage.My Intel RST is NOT running every time I boot up e - 25308627-3wpqtp00zodw0jp5gb00c3yk-3-3.jpgt/uploads/images/25308627-3wpqtp00zodw0jp5gb00c3yk-3-3.jpg" alt="25308627-3wpqtp00zodw0jp5gb00c3yk-3-3.jpg" class="h_mi" />

double click and open go tMy Intel RST is NOT running every time I boot up e - 25308627-3wpqtp00zodw0jp5gb00c3yk-3-10.jpgick ok




Posted on Dec 06, 2014

Testimonial: "Thanks, but booted up and STILL not running. Was already on automatic, so hit "refresh". Nothing!"



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Location change flasher unit indicators

Hi Anonymous, for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix/test or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day. DOWNLOAD 2004 Aprilia Rst 1000 Futura

Apr 27, 2014 | 2004 Aprilia RST 1000 Futura

1 Answer

My Gigabyte Mother Board shows some time Load Optimized Defaults ten boot or Load Optimized Defaults then reboot . How to fix it?


Its very simple just follow these steps:-
you can enter the BIOS by hitting the DEL or F2 key when the computer first starts up and then selecting Load optimized defaults.
The reason why it shows is that any changes you have made to your BIOS may not be saved or probably the CMOS is not firmly fixed.Hope this solves your problem.Please rate me if my solution helped you.Have a good day.


Apr 11, 2014 | Gigabyte Technology Gigabyte GA-H61M-S1...

1 Answer

My intel @ rst is not running im using window 7 and my laptop is Sony vaio E series to fix it? And how to know where is the problem?

Did you install your chip-set drivers? Check that you have done so, that should be the problem. If you run RST without the chipset driver installed, it will say it's not running.

Nov 03, 2012 | Computers & Internet

1 Answer

The Intel RST service is not running

This is not something that is essential but if you want to start it go to your Administrative Tools in the control panel and start it. You can set it to start automatically. Click Start/Control Panel and look for Administrative Tools, it might be under System or System and Performance depending on your operating system. Once you have the Administrative Tools open select Services. Under Services look for Intel RST and start it and you can set it to start automatically.

May 30, 2012 | Acer Aspire AS7741Z5731 Netbook

1 Answer

CMOS problem

Go into the bios settings and reset the bios or do it manually on the MB if that don't solve your problem replace mother board.

Dec 07, 2011 | Intel Desktop Board DH61WW Classic Series...

1 Answer

I use Windows 7, and I have a second internal HDD. Recently a message has appeared on my toolbar (bottom right) that my Intel RST service is not running and I believe there is a driver which needs to be...

Did you check the box to install Intel® Control Center as well as Intel® Rapid Storage Technology app?

Try not having the box checked.

Right click on the .exe “iata96enu.exe” and click “Run as Administrator”.

Also try changing the User Account Control Setting “UAC” to Never notify when installing.

Jun 11, 2010 | Computers & Internet

2 Answers

Beeps 2 times & a warbling noise when trying to boot up - unplugging power lead & pressing ON/Off button & reconnecting power lead starts up OK - but it can be OK for several days & th

By warble, do you mean a high pitch non stop noise? If so... I think I went through that bout 2 months ago, it was a easy fix. Ifr it is the same problem

May 29, 2009 | HP Vectra VL420 Intel Desktop PC - Intel...

1 Answer

C++ run time error

Hi ,
Try loggin on to safe mode and check whether you get the same message ---
How to log on to safe mode - Keep tapping f8 While system boots and choose safe mode or safe mode with networking. --- If no error message do a clean boot.

How to do clean boot --
Click Start - Run - types msconfig - opens system configuration utitlity --- Click on services tab -- check the box hide all Microsoft services, then click disable all ***** click to the tab start and disable all click apply then close and it will prompt you to restart the computer . Restart the computer. I hope it fixes the issue .

Nov 15, 2008 | Microsoft Windows Vista Ultimate Edition

1 Answer

Setting the date

If not in the time mode, press mode to get to the time mode.
While in the time mode, press and holdlap/rst for two seconds.
The seconds will begin to blink.
Press st/stop to reset seconds to zero
Press mode and the minutes will begin to blink.
Press st/stop to advance the minutes
Press mode and the hour will begin to blink.
Press st/stop to advance the hour
Press mode and the day and date will appear. The day will blink.
Press st/stop to advance the day.
Press mode and the month will begin to blink.
Press st/stop to month the minutes.
Press lap/rst to return to normal state with you new settings. You can hit lap/rst to return to normal state at any time in the process, for example if you only want to set the minutes, just hit lap/rst after you set the minutes.

Apr 28, 2007 | Timex 1440 Nylon watch

Not finding what you are looking for?
Microsoft Windows 7 Home Premium 64BIT Operating System Software  OEM DVD Logo

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2983 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides