Question about Gestetner Office Equipment & Supplies

2 Answers

Gestetner 6123 error code E 12

Error code E 12 while start up.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Gestetner Expert
  • 208 Answers

Inside the master disposal box is a black pressure plate. It cannot see the home position sensor. Remove it and check where the flag is for that plate. When properly repositioned it will operate again. Also, master sure that the disposal box set sensor is not popped out of its mount.

Posted on Dec 14, 2014

  • paulfvincent Jan 18, 2015

    If the E-12 will not reset, check the fuses on the power supply. The fourth one down if blown will cause an E-12 and E-13. Typically this is caused by a shorted out paper feed motor. The motor and the Main PCB are bad and must be replaced. How you tell is unplug the motor. Replace the fuse. Turn on the unit. If the fuse does not blow with the motor unplugged they motor and board are bad.

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

It came from the master disposal box try to check the the sensor or the actutor from the box and clean the sensor with methylated spirit

Posted on Jan 17, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gestetner 6123cp


i have gestetner copy printer model 6123 cenhelp me removed earror code e-00 please help me

Aug 17, 2013 | Office Equipment & Supplies

2 Answers

Gestetner 6123 paper jaming feeding section copy printer


nrg 6123 copy printer after make stencil line on copy soulition

Jun 15, 2012 | Gestetner - AO40 Wide Format Copier Copier

2 Answers

What causes error 12 on a gestetner 6123 duplicator


6123 gestetner digital copy printer no salve problum single line on copy. cleane complete scanner and thermalhead,

May 15, 2012 | Gestetner - AO40 Wide Format Copier Copier

1 Answer

I'm getting a e7 error code on the Gestetner 2732ztd


This means a probem with the sorter, check sensor's and jogger

Mar 18, 2012 | Gestetner Office Equipment & Supplies

2 Answers

I have gestetner 2722ztd copier when i replace the explosure lap the copier dispalys error code e1 on the screen .how i clean/remove the error massege ? please help me


Please check after replace the continuity the expo lamp,expo thermofuse.The E codes are displayed in the copy counter.To display both digits of the E codes press the enter key.
E 11 - Exposure lamp error.Possible cause: expo lamp open,expo thermofuse open,power supply defective,main board defective.
E 12 - Exposure lamp error.Posible cause:AC drive board defective,main board defective.
E 13 =Zero cross signal error.Possible cause:main board,power supply defective,zero cross line open or the conector on the main board is not conected correctly.
For reset turn ON/OFF the main switch unplugged wait 10sec and turn ON or:turn ON the main switch,turn DIP switch 101-1 ON/OFF and turn the main switch OFF/ON.The DIP switch is located in the rear parts into the main board.

Sep 20, 2009 | Gestetner Office Equipment & Supplies

1 Answer

Got error code e104 duplo DP-460H


We AEBO is professional manufacturer of compatible duplicator ink and master for Riso ,Ricoh,Gestetner,Duplo.

For Risograph : RZ/GR/RA/KS/CR/RN/RP/RZ/TR/FR /GRHD/RPHD
For Ricoh: VT/JP-6/JP-12/JP-500/JP-10
For Gestetner: CPI2/CPI7/Stencil ink 217 /CP15/18
For Duplo: 504/51F4/544/744/ND 24

With high quality at economical price . We have been awarded USA SGS certificate and China Excellent Brand.
AEBO packing ,neutral and your customized packagings are all available.
Sincerely hope a pleasant cooperation with you .

meachell@chinaaebo.com

Jan 08, 2009 | Duplo DP460H Copier

3 Answers

Gestetner-2412Z copier-error code UF


UF is a panasonic code,the u means user fix.If you have an users guide it will tell u what to do.

Mar 03, 2008 | Gestetner DSm515pfd Digital Copier -...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gestetner Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1297 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Gestetner Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...