Question about Capresso Jura C1000 Super-Automatic Coffee and Espresso Center with

2 Answers

We just moved to Europe, The Netherlands. Of course I took my CAPRESSO C1000 with me. I was wondering whether the internal transformer can be replaced with one that works with 220V, or whether it can

Tried to buy a step-down transformer but it is very expensive and heavy.

Posted by on


2 Answers

What does the label say on the base does it say
i dont think it will
you can use a 250v to 110v if it came from the states
it will use 110v so you need a step down
ignore the differance from 220v to 240v its not that important 20v in the main

youll find one on ebay cheep

check the wattage the maker uses and get a transformer that can supply enough juce

i would take it too a local shop sells electronics like maplin mondo radioshake local similar
and they can guide you with free advice

Posted on Dec 05, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 84 Answers

Most unlikely it can be replaced. the whole design needs to be changed. a stepdown transformer has to be heavy rating to handle the machine, otherwise the transformer will burn out.

Posted on Dec 05, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a C1000. The plastic tube that goes from the pump up to the heater developed a leak at the connection to the heater. Can I get a new plastic tube with the fittings on it? Its easy to install.

Ihave the same problem , plus a hole in the heater , spoke to capresso rep they do not sell me any internal parts ,I would have to send ithe machine to them pay $280.00 before Shipping they will fix it or pay the difference to an ubgrade.
let me know please if youu find a solution

Jul 28, 2011 | Jura Capresso C1000 Espresso & Coffee...

1 Answer

I need to clean my capresso c1000. i can't find the instructions. i put a cleaning tablet into the ground coffee area, and ran the ground coffee button a few times. is that it?

No, first push the self clean button (hold until lights come on). Then pull the grounds unit and empty it, that will turn off one red light. Fill the water tank. Then drop the tablet. Then hit the ground coffee button. Cycle through and dump the grounds each time the grounds light illuminates.

Jul 09, 2011 | Jura Capresso C1000 Espresso & Coffee...

1 Answer

I have a capresso C1000, and I looking for the pump plastic tubing

Quite possibly, you can find what you're looking for at an aquarium supply store. They have different types & sizes of tubing.

Jul 02, 2009 | Jura Capresso C1000 Espresso & Coffee...

1 Answer

Quit in the middle of the cleaning process

call capresso, they will go through the whole machine for a small fee, or offer you a new model at a reduced cost

Jan 17, 2009 | Jura Capresso C1000 Espresso & Coffee...

2 Answers

Blinking lights

check out chapter 15 of the manual, you can download it from this link.

Dec 02, 2007 | Jura Capresso C1000 Espresso & Coffee...

6 Answers

Capresso C1000 - Coffee is going into the coffee grounds bin rather then

I had this same problem water going into the grounds disposal chamber, plus all green and red lights flashing. Was told if I could clear the lights to clean the screen and run a tablet cleaning. I was able to clear the lights tried to run the cleaning but it failed again. I have had my machine for over 4 years so instead of sending it back I decided to take it apart. The problem I found is an O-Ring that runs inside of the compression pump chamber failed, if I can find an O-ring that is the same size I believe it will be as good as new.

Dec 01, 2007 | Jura Capresso C1000 Espresso & Coffee...

Not finding what you are looking for?
Capresso Jura C1000 Super-Automatic Coffee and Espresso Center with Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Capresso Coffee Makers & Espresso Machines Experts

Lawrence Oravetz

Level 3 Expert

10263 Answers

M.B. Nataraj
M.B. Nataraj

Level 2 Expert

84 Answers

Shrikant Shinde
Shrikant Shinde

Level 1 Expert

12 Answers

Are you a Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides