Question about Canon IR 3300 Digital Copier
Hey, if it was a compatible toner or toners you installed, the i would recommend that you take it back to your supplier to replace the toner or toners. the dull print may be cause of incompatiblity between fuser unit and laser scaner.
Posted on Dec 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
How are you trying to print? You need N boot rom. Press Counter Check. Do you see IR3300(IR2200N) or IR3300(IR2200). If you see the N then you should be able to print with it. If not, you can't.
In Service Mode (to get into this press Additional Functions (button with * on it) > 2 then 8 > Additional Functions) go to Copier > Display > Version. What do you see for BOOT-ROM (does it have a N at the end?). For PS/PCL what do you see?
If your BOOT-ROM is N and you don't have a number for PS/PCL then call a technician to install networked system software.
If BOOT-ROM is not N, buy a Network Multi-PDL Kit C1 and get a technician to install it and load N system software.
If BOOT-ROM is N and you have number for PS/PCL check your IP settings. Make sure that DHCP is turned off. Set up your printer using an IP port with the static IP address assigned to the copier.
Use PCL5e or PS drivers, don't use PCL6.
Posted on Jul 15, 2009
E007-000: An error in the rotation of the fixing film is detected.
The reading of the main thermistor is 100°C or higher and, in addition, the
fixing film sensor does not detect the rotation of the film for 6 sec or more
while the fixing motor is driven.
Get a tech to service your copier.
Posted on Nov 16, 2009
I.e. Teflon problem if u getting the paper jam in fusing unit every time teflon is cutted in fuser unit is getting prints after meachine on and off, problem with the sensor u cleam it that's work fine. for any information plz mail me e-Mail : email@example.com, 919290062654
Posted on Mar 13, 2010
Tips for a great answer:
Jul 31, 2014 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...
Feb 06, 2014 | Brother MFC-8480DN All-In-One Laser...
Mar 05, 2013 | Office Equipment & Supplies
Sep 09, 2011 | Canon imageRUNNER 2200
Feb 23, 2010 | Canon imageRUNNER C3200 Copier
Dec 18, 2009 | Canon imageRUNNER 3300 All-In-One Laser...
Nov 20, 2009 | Canon imageRUNNER 3300 All-In-One Laser...
Dec 24, 2008 | Minolta EP4000/5000 CS/PRO Copier
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: