Question about Canon imageRUNNER 3300 All-In-One Laser Printer

1 Answer

How to solve error 100-0001

Showing error 100-0001 in my copier

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Canon Expert
  • 224 Answers

Code E100-0001 Description The BD signal is not detected 10 times or more within 10 msec in 5 msec after the generation of the laser drive signal Causes The wiring is faulty (short circuit, open circuit). The BD PCB is faulty. The laser scanner unit is faulty. The DC controller PCB is faulty. Remedy 1. BD PCB Try replacing the BD PCB. Is the problem corrected? YES: End. 2. Laser scanner unit, DC controller PCB Try replacing the laser scanner unit. Is the problem corrected? YES: End. NO: Replace the DC controller PCB.

Posted on Dec 10, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba copier E-Studio 2006 showing Error code C452 what could be a problem


Have you tried to check well your fuser unit because its fusing related problem where by those thermistor there not communicating well the temperature is either low

Nov 29, 2016 | Toshiba Office Equipment & Supplies

1 Answer

Toshiba E-studio 230 Copier shows this message call for service 631012


Well, first of all Francis, that isn't your error code, that's your meter (the odometer of the copier so to speak). Error codes will show C--- or E---
examples are C447 (fuser error) or E010 (fuser related jam)

Jan 10, 2013 | Toshiba E-studio 230 Copier W/net Print,...

1 Answer

E004 (IR 400)


This is the error for the temperature of the fixing assembly not being detected or getting too hot. The thermisitors will most likely have to be replaced. First try resetting the error by pressing the additioanl function key, then press the 2 & 8 keys at the same time and then the additional function key again. The display should show COPIER - press this to highlight and the display show then show a series of keys at the top. Press FUNCTION, then CLEAR, then ERR, and then OK. Turn off the copier and turn back on again. This resets the error and if the error comes back up again then the parts will have to be replaced. Good luck.

Jul 27, 2011 | Canon imageRUNNER 400S Copier

2 Answers

Sir, My copier model RICOH MP 2000Le shows error . ADD TONER & some time it shows SC 302


sc 302 - charge roller current leak. strip the drum unit (dmu) and clean the unit

Sep 04, 2010 | Ricoh Aficio MP 2000 Black and White...

3 Answers

Printer shows error CH551


Is this actually a Ricoh Aficio 1013F, or another model, because "CH551" is not a ricoh service code?Do you mean "SC551"
If so, this is a fuser "triac" problem (basically a fuse in the heater unit). It can only be reset in service mode after the problem is fixed...and will require a tech.

May 21, 2009 | Ricoh Aficio 1013F Copier

1 Answer

When its switched on it shows me system error 000. send me a solution immidietly.


it is a fiser related error, you need to reset error code servie mode.
* 28* will put you into service mode,
then choose copeir, option, clear, then clear error, highlight that press ok,
then restart machine.

May 12, 2009 | Canon imageRUNNER 1023iF Black and White...

1 Answer

Canon copier show error code:E100


E100 means the copier is not warming up.Make sure all the wires to the fuser are properly connected, then open and close the front door.you may have to go into the service mode to reset the error code.Good Luck

Mar 26, 2009 | Canon Office Equipment & Supplies

1 Answer

Call service


Shows ASIC error. Unplugg the copier, wait 30 seconds and turn it back on again. See if the error appears. Does this error code happen when you turn it on or when you print something to it?

Aug 02, 2008 | Sharp AR-275 Copier

Not finding what you are looking for?
Canon imageRUNNER 3300 All-In-One Laser Printer Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2153 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...