Question about Whirlpool Washing Machines

1 Answer

Okay so I have a brand new Whirl pool washer. I got into an argument with someone and they took a shovel and hit the front of the washer where the side and the top connect. It made some dents and now

I have tried unplugging it for hours and then turning it back on. I have tried holding the cancel butter for 10-15 seconds. I don't really know what else to do.

Posted by on

  • Anonymous Dec 07, 2014

    if you dont know what take the mains {power} out the wall means you need to call a service engineer

×

1 Answer

I think the front panel board is damaged by the impact
and perhaps has cracked

i would take the lid off the top take the mains out the wall!!

then you can see whats going on
i think you can add a photo of the inside damage

Posted on Dec 04, 2014

Testimonial: "What does take the mains out of the wall mean?"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My whirl pool 1400 has stopped working the


Them washer are what you call high efficiency washers.HE. They only use 1 gallon of water to wash them clothes. You go adding more than a teaspoon of soap and that washer is gonna have a cow. Over a period of time that soap gonna build upb50e111.jpg so much the washer is gonna just give-up the ghost. If you know you use the correct amount of soap there could be something in them pump.You need to remove the service panel41b08ad.jpg and take a looksee at that tech sheet and see what it say about them light flashing. While you at it you may as well remove that cap6349b09.jpg and clean out that filter. d081835.jpgThat might put yall back in business. That tech sheet will be in there by that white box which is the motor control unit. The other stuff that the tech sheet error chart might reveal is located on the topside.539a7ad.jpg Good luck on dat repair mon ami.

Jun 06, 2010 | Washing Machines

1 Answer

No power


The following link explains how to replace the drain pump on a Whirlpool Duet:

http://www.fixya.com/support/r385845-checking_drain_pump_in_whirlpool_duet

If you have questions about this repair, or need additional assistance, please let me know. I hope this helps you.

Sep 11, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

JVC dvd player try is brand new but the tray won't open.


Okay i just bought a new dvd player and the tray won't open and hitting it won't work! can someone help please?

Mar 28, 2009 | JVC XV-N370B DVD Player

1 Answer

Dryer does not go past wet cycle


if your vent hose is clogged, your element most likely burnt open

Mar 07, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirl pool washer bangs when in spin cycle


if new did you remove shipping strap in back..the unit cant lean more than 2 degrees..make sure clothes are even in tub..try to wash clothes alike..

Dec 25, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

F1 code


well they refuse to adress your issue under a warr. beacause of age , but im certain that a whirlpool auth. servicer will glady adress your issue. As for the F1 generally relates to a faulety control board. but would want( a serveicer ) to check in more detail before jsut askin you to replace the board

Oct 23, 2008 | Whirlpool Cabrio WTW6600SBT Top Load...

2 Answers

My new whirl pool washer is leaking a lot of water


Where is it leaking is that the question?? if i show you can you open the washer up to check?? are you mech. inclined?

Jan 21, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...