Question about Canon Office Equipment & Supplies

1 Answer

Canon ir 2520 error e00000 000

Replace power supplies and heater unit

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 48 Answers

How to clear E000, E001, E002 and E003.
1-Enter service mode by pressing additional functions than 2 than 8 and then Additional Functions.
#SSSW will be displayed.
2-Use the right arrow and scroll to #CLEAR then press OK.
3-Use the right arrow and scroll to ENGINE then press OK.
ERRCLR will be displayed then press OK.
4-Then power cycle the machine.
------------------------------------------------------------------------
Service Mode : ADDITIONAL FUNCTIONS>2 KEY>8 KEY> ADDITIONAL FUNCTIONS>#CLEAR>ENGINE>ERRCLR.
Note: This mode should be used to clear all Fixing related Error Codes.
If this does not resolve the error code. / u need to call for service or if u are a tech--pull out the fix unit to inspect

Posted on Dec 04, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My canon ir 2520 has a insert the drum error


hi. remove the drum unit from the machine and verify the contact in the back side of the unit . maybe is dirty . if problem persist you need to try another drum . if problem peristaltic after that maybe there is damage in the hvt electronic board

Apr 25, 2017 | Canon Office Equipment & Supplies

1 Answer

Want to clear error code on ir 2520


Hello,
Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.

Best regards,
Marius

Nov 29, 2016 | Canon imageRUNNER 2520 Laser Multifunction...

1 Answer

How can i fix the error code e000002 shown on my canon ir 2520 photocopier


Unplug the printer let it sit for one minute than power it back up. If the error doesn't clear repost.

Mar 05, 2016 | Canon imageRUNNER 2520 Laser Multifunction...

2 Answers

After installation of canon IR 2520 its give me an E000716


E716 Erroneous communication with optional cassette or 2-way unit 0000 After the presence of a cassette pedestal or a 2-way unit has been detected, the communication fails to be normal for 5 sec. 1. Check the cable.
2. Replace the DC Controller PCB (PCB4).
3. Replace the Cassette Pedestal Driver PCB.
4. Replace the 2-way unit driver PCB. 0010 When the communication with the 2-way unit is faulty after detecting the connection with the finisher. 1. Install the 2-way unit.
2. Check the cable.
3. Replace the DC Controller PCB (PCB4).
4. Replace the 2-way unit driver PCB.

May 20, 2015 | Canon Office Equipment & Supplies

1 Answer

How to solve e000002 error canon ir 2520 Printers?


Fixing unit temperature rise too high. In service mode go to :CLEAR<ENGINE<ERRCLR,turn on and off machine. Replace the main thermistor,replace the fixing unit

May 04, 2015 | Canon Office Equipment & Supplies

1 Answer

Canon ir 2520 error code E000010


Unstable rotation of the Main Motor (M1)
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
1.Replace the Main Motor (M1). 2.Replace the DC Controller PCB (PCB4).

Jan 23, 2013 | Canon Office Equipment & Supplies

2 Answers

My canon image runner 2520 has been duly bought and well powered, but it brings error code e000020 and it does not print or scan,i need immediate help.


the problem is when i have replaced the drum of my canon ir 2520,appeared for me two big black lines and then appeared that code :e000196.thankssssssss.

Jul 20, 2011 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2126 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...