Question about Haier LEC24B1380 24" TV/DVD Combo - HDTV 1080p - 16:9 - 1920 x 1080 -

1 Answer

Message "no Signal" when everything is hooked up.

I turned on the tv just like I do every night. I was setting the timer when I accidentally hit the channel+ button. I then received a message "no program showing" I tried the channel- button but there was no change. I turned the tv off hoping it would reset. No change. I have directv connected to the tv so I turned that off. No change. I reset directv...now it says "no signal". I made sure that the tv was still set on tv and it is. I don't know what else to try. I hope you can help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 167 Answers

You have a board that has malfunctioned if all your connections are good. Sounds like the 'Main Board' but there are other bosrds that can block the signal also. Hook it up with a different type connection and see what it does.
Col. Dana Gillespie

Posted on Dec 04, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I turned off my tv last night with the remote and now it wont turn it back on help


check to see if top of remote has settings like,aa&t tv, power, dvd,aux. try pushing one at a time, then power. you may have just hit another button accidentally.

Apr 03, 2015 | Televison & Video

1 Answer

Red lamp light comes on and TV turns off model # WD 60735 what's the reset procedure but it shows a good picture after a few minutes it turns off


With the remote control in your hand press the power button to turn it on. Hit menu check sleep settings some one might have accidentally hit the timer .set it to 00 clear it.

Dec 12, 2014 | Televison & Video

1 Answer

Lost signal


Have you tried to push the tv input button? Sometimes when a button is buy accident it changes the input on the tv. Hope this works, let me know.
Good luck, Toni

Nov 29, 2011 | Televison & Video

1 Answer

What is auto shut off on a 40


When the TV dose not see any signal feeding it, be it be cable, video, etc. it will go into standby mode, timer is for setting the TV to turn off at a pre setting time, I use this mode when I go to bed and set it to turn off after about an hour so the TV will not be on all night when I fell asleep.

Nov 27, 2009 | Televison & Video

1 Answer

No signal converter box.


Why is this in the computer section?

Anyway, don't exchange the box just yet! First, can you access the converter's menu? Because mine automatically comes up with the "no signal, call customer service" message, but I can access the menu fine -- so the hook-up is not the problem. If you can access the menu, let it autosearch for you, because mine can't be used until I do this. If you get the "weak antenna signal message", refer to the user manual to find out how to check your antenna signal strength; if it's in the weak range, you have to buy a better antenna, most likely from the official source: http://www.accessHD.tv

You can always exchange the box and repeat the process. Getting the "no signal" message is a good indicator that you've hooked everything up right, especially if it's accompanied by a customer service number. You can email me at kalalkb@gmail.com and I'll try to help you troubleshoot the problem if you like. I'm up all night.

Jun 25, 2008 | Computers & Internet

4 Answers

Polaroid TLA-01511C


Tried to use my TV as a computer monitor. When tries to boot up, will go to "No Signal". All hooked up correct. Is ther something I need to do tobe able to use the monitor with my computer. I have a Dell Desk Top Computer.

Jun 16, 2008 | Polaroid TLA-01511C 15 in. LCD Television

1 Answer

Jl audio 500/1 amp


You may have the amp set to turn on via an audio signal. Set the Signal Sensing switch to OFF.

Jun 13, 2008 | Jl Audio 500/1 Car Audio Amplifier

1 Answer

RCA CTC203 No Colour in the Video IN or Svideo


It is possible that while programming the remote you got into the menu on your TV and adjusted the color control. Go back into the menu and find the controls for color, contrast, tint and etc. If the color bar is all the way to the left, then adjust it to go to the right until you get enough color. This is just one possible solution. Hope this corrects the problem.

Dec 05, 2007 | RCA Universal Remote Control

2 Answers

RCA CTC203 No Colour in the Video IN or Svideo but colour is present on tv channels.


try removing your vcr and dvd connections first while watching TV programs alone!. if still there are no colors then your tv have a problem!

Dec 05, 2007 | Televison & Video

1 Answer

No picture or sound


If you see only snow and the words "NO SIGNAL" are displayed, and you know that you have the set hooked up to a good signal and the TV is set to the right channel, it means that your tuner has stopped working and needs to be replaced. First, though, make sure your signal is good. A good way to test this is to hook the TV to a good VCR, put in a good pre-recorded tape and hit play. Tune the TV to channel 3 (or 4) and if it is still all snow, have the tuner replaced by a qualified tech.

Sep 03, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Haier LEC24B1380 24" TV/DVD Combo - HDTV 1080p - 16:9 - 1920 x 1080 - Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Haier Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...