Question about Televison & Video
Have unplugged it from the power socket and then powered it up after a minute but it still will not switch on and the red light continues to flash
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
Posted on Dec 04, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I would suspect a problem in either the backlight assembly, or the power supply that drives it. If it's the power supply, the part may be over $100.
Posted on Jan 18, 2007
SOURCE: Red Light Flashing 6 times
When the lamp fails in this unit, often the thermal fuse opens. The error code is 6 blinks. To replace this part requires a great deal of deal of disassembly.
Posted on Mar 29, 2008
I have had this same problem twice in the past 3 months. So far both times I've been able to get it back after a week or two. I'm not sure what works, but unplugging and detaching the antenna and cable and waiting a few days seems to be the key. In both instances, I unplugged it for a few days then plugged it in for a few days and repeated the processes until I eventually got the steady red led. Both times prior to the red led the led would flash red then green and make a clickiing noise for several hours before I was able to get it working again.
Posted on Apr 22, 2008
If the Standby light is blinking at the front panel of the TV, it seems that there is an internal malfunction occurred in the TV. I will forward a link to a page where you can get more information and troubleshooting steps for this issue. http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C399467 Please perform the steps provided on the page. If the issue still persists then service of the TV is required.
Posted on Jun 16, 2009
Tips for a great answer:
Jun 04, 2016 | Sharp Aquos Televison & Video
Jan 08, 2016 | Samsung LN32A330 32 in. LCD TV
Dec 03, 2014 | Hisense Televison & Video
Apr 14, 2017 | Televison & Video
Oct 15, 2013 | Samsung UN46D6400 46 Inch 3D 1080p Smart...
Jan 29, 2011 | Philips 37PFL5332D 37 in. LCD Television
Nov 21, 2009 | Sony KDF-E50A10 50 in. LCD HDTV
Jan 05, 2009 | Televison & Video
Aug 18, 2008 | LG 42PX5D 42 in. Plasma HDTV
Apr 14, 2008 | LG 26LX1D 26 in. LCD HDTV
Aug 22, 2017 | Sylvania Televison & Video
68 people viewed this question
Usually answered in minutes!