Question about Televison & Video

1 Answer

I need help with enteing my code - Televison & Video

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 73,631 Answers

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Posted on Dec 04, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much is on my ent card


Call ENT customer service
1.866.840.3792


https://www.visadpsgiftcard.com/Ent/PRC248/CP248-T00-003/docs/contact.htm

Jul 18, 2015 | Cell Phones

2 Answers

My cd/dvd produplicator is now only burning cds and not dvds. I am getting error message that says target drive not ready. Is there a solution or must I replace the target drive altogether?


You can try going to manufacturer's website to see if there is a firmware update. You can try uninstalling a reinstalling the application/drivers for the device as well.

Jun 01, 2014 | Vinpower Digital Computers & Internet

1 Answer

Is there a doctor to a person who can't hear


Hi there,

Have a blessed day.

When it comes to diagnosing and treating ear problems, doctors basically have three levels of "ear expertise." They are from least to most-primary care physicians (PCP), ear, nose & throat doctors (ENTs) and otologists/neurotologists. Each has their own niche.
1. Medical Doctors/Primary Care Physicians (MD/PCP) Often your first contact with the medical community is with a standard Medical Doctor (MD), often called a Primary Care Physician (PCP), General Practitioner (GP) or Family Doctor. These doctors have no specialized training in treating ear problems. However, you often need to go to one of these doctors in order to get a referral to an ear specialist such as an ENT or otologist.
Family doctors normally treat ear conditions of the outer ear and ear canal such as removing ear wax or treating infections in the ear canal. For problems in the middle and inner ear, they should immediately refer you to the appropriate ear specialist.
2. Ears, Nose & Throat Doctors (ENT) The middle level of "ear expertise" is the Ear, Nose & Throat doctor, commonly referred to as an ENT. The fancy term for these doctors is otolaryngologist (OH-toe-lar-ing-JOL-uh-jist) or sometimes by the ******-twisting name of otorhinolaryngologist (OH-toe-RYE-noe-lar-ing-JOL-uh-jist). (When you break this name down, it is easier to understand and pronounce. Oto-ear, rhino-nose and larynx-throat). Sometimes these doctors are called EENTs (eyes, ears, nose and throat doctors).
ENTs are medical doctors that have taken further training and specialized in problems of the ears, nose and throat.
Despite the name, ENTs do not spend a lot of their time working with ears. One otologist told me that he estimated the average ENT only spent about 5% of his time with ears. Thus you cannot expect them to be experts on many kinds of ear problems.
ENTs generally specialize in problems of the middle ear-typically middle ear infections and medical problems of the middle ear. This may include surgical procedures for things like otosclerosis, or removing middle ear tumors such as cholesteatomas. They may also perform CI surgery.
3. Otologists (Neurotologists) At the top of the pile is the otologist (oh-TOL-uh-jist) and neurotologist (NEU-roe-oh-TOL-uh-jist). Otologists and neurotologists are medical doctors who have trained as ENTs and then completed additional studies is the sub-specialty of otology (or neurotology). These are the real ear experts and are the doctors that know the most about inner ear problems.
If you experience sudden hearing loss and there is no obvious reason, these are the doctors that most likely will be able to help you. In fact, otologists/neurotologists are the only doctors (as a whole) that seem to recognize the true emergency nature of sudden hearing loss. Unfortunately, there are not very many otologists/neurotologists in the country.


Hope it helps.

Thank you for using fixya.

Oct 08, 2011 | Health & Beauty

1 Answer

I have a Radio Shack 6 in 1 remote (15-1923) and a Sansui RZ-3000 receiver. Had to change the batteries and lost the connection. What code can I use to make this work again?


The Sansui receiver should be programmed manually. Turn on the receiver manually, then press and hold Setup until the light turns on. Press the button that you want to control the receiver. The light will blink once. Aim the remote at the receiver and press On until the unit responds. When the device turns off press ENT within 5 seconds. If you miss the code, press repeatedly Last and then On until the receiver responds. Then press ENT. Check if the code works. If it doesn't repeat the code search but wait longer between key presses.

To record the code, press and hold setup until the light turns on. Then press the device control button. Then press 0-9 individually (wait a few seconds between key presses) until you see the light blink. That will be the first digit in the code. Repeat the 0-9 sequence for the second and third digit in the code.

Radio Shack has the code list and manual here: http://support.radioshack.com/support_video/42245.htm . Sansui CD player, TV and VCR codes are listed in the documentation.

I hope this helps.

Cindy Wells

Mar 02, 2011 | Televison & Video

2 Answers

I forgot my password to my hp pavilion Ent special edition laptop.. Help?


For bios password ...
enter 3 time worng password u will get a 5 digit code send me that code .. ill send u password ..

Aug 04, 2010 | HP Pavilion dv4000 Notebook

1 Answer

How can i format Y module in the i class datamax printer?


can be done from the Front panel of the printer:
1. press MENU for MENU MODE
2. press FWD key to PRINTER OPTIONS
3. press ENT
4. you will see MODULES, press ENT
5. press FWD to FORMAT MODULES
6. press ENT
7. press FWD to Y MODULE, press ENT
8. press ESC to back out of menu mode. Make sure to press Y when asked to save changes.

Hope that helps !

Apr 11, 2010 | Datamax DMX-I-4212 Label Printer

2 Answers

Hello- My 332c will not show speed. It worked before.The spinner wheel is not damaged.Speed just flashes 0.00 mph Thanks, Jeff


Try setting up the speed in the overlay data menu again:
1. Press MENU, arrow down to OVERLAY DATA and press ENT
2. Highlight the option for speed (WATER SPEED or GROUND SPEED) and press ENT
3. Highlight the REMOVE button and press ENT
4. Highlight (PRESS ENT TO ADD) and press ENT
5. Arrow down to SONAR DATA and press ENT
6. Arrow down to WATER SPEED and press ENT, a check will be displayed in the box
7. Press EXIT twice

If the speed is still flashing, the data is still invalid. Try resetting the unit completely:
1. Turn unit off
2. Press and hold the PAGES and POWER key until the "DO NOT RELY..." alarm appears
3. Set up the overlay data for speed again: 1. Press MENU, arrow down to OVERLAY DATA and press ENT; 2. Highlight (PRESS ENT TO ADD) and press ENT; 3. Arrow down to SONAR DATA and press ENT; 4. Arrow down to WATER SPEED and press ENT, a check will be displayed in the box; 5. Press EXIT twice

If the speed is still flashing, good chance the speed sensor is bad even though the wheel still spins. Install the latest LMS-332 updates from http://www.lowrance.com/en/Products/Marine/Full-Size-SonarGPS-Chartplotter-Combos/LMS-332C/Downloads/LMS-332C-Software-Update/ and set up the overlay data again.

If it turns out that the speed sensor is bad, just use speed from the GPS. This can be set up from the overlay data menu as GROUND SPEED.

(note: the overlay data must be set up for each page individually. So if you set up speed to be displayed on the map screen, it will not also be set up on the sonar page)

Jul 12, 2009 | Lowrance LMS-332C GPS Receiver

1 Answer

Codes for philmore Pm-rc1a remote control!


Philimore PM-RC 1A remote user guide:
* Manual turn on TV DEVICE.
* Press CODE on remoter until red light stay on, press "TV" on remoter,
then the red light will flash to keep searching for properly code until
TV DEVICE turn off (=right code found ), immediately press ENT on remoter. done!
GOOD LUCK!

Apr 08, 2009 | Televison & Video

1 Answer

Need help with programing my Gemini easy 3 remote I am not sure how to set it up to take the code


I had the same problem, after searching the net for 2 hours to no avail, I got lucky and figured it out. Hold down the Ent and 0 keys at the same time for about 4 seconds. The green LED will come on. Enter the code of your TV or electronic and hit enter. then hit the power button on the remote. If the code was right the electronic will turn off.

Mar 24, 2009 | Gemini DUMRC01 Remote Control

6 Answers

I have lost the instructions for my jumbo touch screen remote


I was here originally with a problem identical to one posted and found that the best solution posted was only partially working. My husband and I were able to get the tv on but that was the extent of it. Once on the remote was not working. Out of frustration we figured out the that if you practice the exact steps after the tv is turned on, 
1 hold the set button untill the red light comes on 
2 press what you want to set (tv,vcr,dvd,ect.)
3 press power botton aim at unit and wait until it turns OFF then quickly press ent. 
This did it for us and we are now happily watching tv again without having to toss our beloved giant remote into the garbage. Hope this helps!!!!

Dec 03, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...