Question about Vacuums

2 Answers

How do I change from MAX to normal on my Dyson59 vacuum cleaner.

I've tried to find an online manual. NO luck

Posted by on

Ad

2 Answers

  • Official Brand Answer
  • 2,572 Answers

Hi Betty, it's Jack at Dyson.

To change your DC59's power level from Max to normal, just hold down the on/off trigger so the vacuum is running, then at the same time press and release the Boost button on the rear of the machine. When Max mode is activated, the Boost button will light up - when normal mode is activated, the Button will not light up.


I hope this helps, but if you'd like further information or advice please call our experts directly on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Posted on Dec 04, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 125 Answers

They don't have one for download, just have it on their website separated into sections.

http://www.dyson.com/support/dc58%20dc59/dc59-motorhead

Posted on Dec 03, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't activate front brush


Hi Sandy, it's Jack at Dyson.

DC25 has a belt engineered to last the lifetime of the machine. It's protected by a sensor which shuts off the brush bar if something jams it. If your brush bar won't rotate it's likely it just need to be reset. Please follow the steps shown in the video I've attached.

Tip: Once you've checked the cleaner head for obstructions and removed any threads or hair from the brush bar, recline the machine into the vacuuming position. Turn it on with the red on/off switch, then press the silver brush control switch twice.

Please note: The brush bar will never rotate when the machine's standing upright, so make sure you recline it down into the normal vacuuming position before testing it.

I'm confident this will resolve the issue, but if you would like further advice after you've tried this, please get in touch with us directly. You can reach our genuine Dyson experts by calling 0800 298 0298 (UK), 1-866-693-9766 (US), or 1-877-397-6622 (CA).

Best wishes,

Jack
Dyson Online Customer Support
www.dyson.com

Aug 19, 2013 | Dyson DC25 Vacuum

1 Answer

My DC41 Animal Dyson Vacuum's brush will not properly spin.


Hello, this is Ava with Think Crucial.

There are a number of reasons why your Dyson cleaner is pulsating off and on. First, it can be due to a battery of the cleaner. Make sure that the power cable is properly plug to the power and seated properly from the unit while charging. If you find that the battery isn't charging at all, you may need to replace the battery. Second is to check the MAX button of your cleaner. If the button lights up and flashes when your Dyson keeps on pulsating, press and hold the power button and depress the MAX button to turn off the function. You may need to do it for a few times to get the hang of it. Third is to check for any blockages or clogs in the attachments. Look down through the tube and check to see if there are clogs on the sweeper end or if the roller is tangled up in fibers. Clean the roller brush are if it it's necessary. You may need to empty the dust bin of your unit as debris can build up in hard to reach places. Lastly, cleaning the filters may fix the pulsating of your cleaner. Remove the filter and rinse it with cold water and air dry it for 12 hours. Don't use detergent when washing your filters. If the pulsating doesn't go with the given quick fix, I suggest to contact Dyson for further assistance on this.

You can purchase a wide variety of high quality Dyson replacement parts for your Dyson Vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/search?type=product&q=dyson

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

Jul 24, 2012 | Dyson Bagless Upright Vacuum DC41 Animal

1 Answer

Cant get the brush to spin, already tried cleaning, reset button but nothing works. the belt is still good.


Hi there,

I'm sorry to hear you're having difficulties with your DC25. Although you've already tried to reset the machine, please take a look at the video below to ensure you haven't missed anything. You might also like to run through the steps shown in our online support guide:

http://www.dyson.com/support/help.asp?article=1156&product=DC25-ALLFLOORS

Please note, the brushbar will not rotate when the cleaner is standing in the upright position, so make sure you've reclined the cleaner into the vacuuming position when testing it.

If you're still concerned after following these steps, please get in touch with us directly so we can provide further assistance - you can call us free on 08002980298 (UK), or 1866MYDYSON (US). If it's necessary to replace the cleaner head, this should be covered by our 5-year warranty, as long as the cleaner has been used in accordance with the terms and conditions listed in the user guide.

Kind regards,

Jack
Dyson Online Customer Support


[unremark-end]-->

Oct 24, 2011 | Dyson DC25 All Floors Bagless Upright...

2 Answers

Brush not going round .


Hi there,

Your cleaner is equipped with a safety device which shuts off the brushbar if it gets tangled with a rug fringe, shoelace etc. After making sure the brushbar is free of threads, hair or other obstructions, you'll be able to reset the cleaner and get the brushbar running again. The process is shown in easy-to-follow steps in the video below.

If you need further guidance, please refer to our online support pages:

http://www.dyson.co.uk/support/help.asp?article=1502&product=DC24-ALLFLOORS

You may find it helps to use something like the eraser-end of a pencil to depress the reset button - make sure you push it in firmly until you hear an audible 'click'.

Please note, the brushbar will never rotate when the cleaner is standing in the upright position, or if you've turned it off manually using the silver brush control switch located next to the red on/off switch. Make sure you have the cleaner reclined into the vacuuming position when you test the brushbar after resetting it.

By following these steps, you should be able to resolve your issue without further assistance. However, if you've tried this and are still concerned, it's probably best if you get in touch with us directly - you can call us free on 0800 2980298 (UK), or 1866MYDYSON (US).

Kind regards,

Jack
Dyson Online Customer Support


Oct 17, 2011 | Dyson Ball DC24 Bagless Upright Vacuum

1 Answer

It's running hot


Hi there, I'm sorry to hear you're having difficulties with your DC07. I can confirm it's normal for the cleaner to become warm during use. However, if you feel the cleaner is becoming excessively hot, it's a good idea to check the cleaner for blockages, and to wash the filter. The easiest way to check for and remove any blockages is to follow the steps shown in our online support guide: http://www.dyson.com/support/help.asp?article=4&product=DC07-SY-HEPA_US Under normal use, this should be done at least once every 3-6 months. Use cold water without detergent, and allow up to 12 hours for the filter to dry completely before replacing it. By clearing any obstructions and washing the filter, you should be able to resolve your issue without further assistance. However, if you've tried this and are still concerned, it's probably best if you get in touch with us directly. You can call us free on 08002980298 (UK), or 1866MYDYSON (US). One of our experts will be happy to run through some troubleshooting over the phone with you recommend the best course of action. Kind regards, Jack Dyson Online Customer Support

Sep 01, 2011 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

My dyson dc 25 has completely lost suction and instead of sucking air it is blowing air from the ball and from the cleaner head. I already washed the filters.


Hi there,

Sorry to hear you're having difficulties with your DC25. If it doesn't seem to be picking up as well as usual, and debris seems to be coming back out of the cleaner head, it's possible that there's a blockage in the system.

The easiest way to check for and remove any blockages is to follow the steps shown in our online support guide:

http://www.dyson.com/support/help.asp?article=1148&product=DC25-ALLFLOORS

Although you've already washed the filters, you might want to take a look at the video below to check you've done so correctly. Under normal use, this should be done at least once every 3 months. Use cold water without any detergents, and ensure the filters are totally dry before replacing them - this may take up to 24 hours.

Please note, the cleaner returns HEPA-filtered air back into the room through the exhaust vents in the Ball - so air blowing from the Ball is a normal feature of operation, and nothing to worry about.

By clearing any obstructions, you should be able to resolve your issue without further assistance. However, if you've tried this and are still concerned, it's probably best if you get in touch with us directly. You can call us free on 08002980298 (UK), or 1866MYDYSON (US). One of our experts will be happy to run through some troubleshooting over the phone with you recommend the best course of action.

Kind regards,

Jack
Dyson Online Customer Support

Aug 22, 2011 | Dyson DC25 All Floors Bagless Upright...

2 Answers

I've bought a dyson dc07 upright vacuum and need to know how to get suction through the hose as opposed to the main machine.


Hi there,

When the cleaner is standing in the upright position, it's engineered to divert suction automatically from the cleaner head to the hose. The correct way to use the hose, wand and dusting tools is shown in the user guide:

http://media.dyson.com/downloads/us/floorcare/manuals/dc07_opmanual_usa.pdf

If there doesn't seem to be any suction coming through the hose when the cleaner is standing upright, you may need to check the machine for blockages. The easiest way to do this is to follow the steps shown in our online support guide:

http://www.dyson.com/support/help.asp?article=4&product=DC07-SY-HEPA_US

It's also a good idea to give the filter a wash, as demonstrated in the video below. Under normal use, this should be done at least once every 3-6 months. Use cold water without any detergents, and always make sure the filter is totally dry before replacing it - this may take up to 24 hours.

By clearing any obstructions and washing the filter, you should be able to resolve your issue without further assistance. However, if you've tried this and are still concerned, it's probably best if you get in touch with us directly. You can call us free on 08002980298 (UK), or 1866MYDYSON (US). One of our experts will be happy to run through some troubleshooting over the phone with you recommend the best course of action.

Kind regards,

Jack
Dyson Online Customer Support

Aug 18, 2011 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

I need a manual to strip my cleaner down so that i can fix it6


Hi there,

Your cleaner is equipped with a safety device which shuts off the brushbar if it gets tangled with a rug fringe, shoelace etc. After making sure the brushbar is free of threads, hair or other obstructions, you'll be able to reset the cleaner and get the brushbar running again. The process is shown in easy-to-follow steps in the video below.

If you need further guidance, please refer to our online support pages:

http://www.dyson.co.uk/support/help.asp?article=1502&product=DC24-ALLFLOORS

You may find it helps to use something like the eraser-end of a pencil to depress the reset button - make sure you push it in firmly until you hear an audible 'click'.

Please note, the brushbar will never rotate when the cleaner is standing in the upright position, or if you've turned it off manually using the silver brush control switch located next to the red on/off switch.

By following these steps, you should be able to resolve your issue without further assistance. However, if you've tried this and are still concerned, it's probably best if you get in touch with us directly - you can call us free on 08002980298 (UK), or 1866MYDYSON (US).

Kind regards,

Jack
Dyson Online Customer Support

Jul 12, 2011 | Dyson Ball DC24 Bagless Upright Vacuum

1 Answer

How to replace the belt on bissell healthy home vacumn


I think this is a terrible answer.. but after researching everywhere on how to change the belt, most answers were to look up the owners manual. So I looked it up online. this is all it has on changing the belt:
"Belt maintenance
The brush belt is designed to last the useful life of the cleaner when used according to all
instructions in the user guide under normal household conditions. If you feel that it needs to
be checked or replaced, call BISSELL Consumer Services or visit the website to locate an authorized service center. Do not attempt to disassemble the vacuum foot to change the belt."

Frustrating! Good luck!

Jun 07, 2011 | Bissell 5770 Healthy Home Bagless Upright...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...