Problem w/blood pres machine #wgnbpw-720

Do you mean the Walgreens WGNBPW-710 Automatic Blood Pressure Monitor by HoMedics? If so, the manual is available from HoMedics' support page: http://www.homedics.com/instructionbooks/ . In the product list box, scroll down to the correct model. The direct link to the manual is currently http://www.homedics.com//media/documents/homedics/instructionbooks/WGNBPW-710_IB.pdf .

If this is the correct unit, to set the date and time, press the Date/Time Set button with the clock symbol on the top of the monitor. When the hour is flashing press the adjacent + button to advance the hour to the correct one, if needed. Press the Date/Time Set button to confirm the hour and prepare to set the current minutes and press the + button to advance the minutes to the correct time, again if needed. Again press the Date/Time Set button to confirm this time and the month will start to flash. Press the + button to change this to the current month. Press the Data/Time Set button and this will be confirmed. The day will begin to flash and you can adjust this with the + button. Press the Date/Time Set button to confirm the day of the month and the year will flash. You can adjust this with the + button then press the Date/Time button to confirm the current year.

To scroll through the memory, press the Memory button. Each button press will display the preceding reading from the current one. To clear a memory item, press Memory repeatedly until you reach the reading to erase. Then press both the Date/Time Set and + buttons simultaneously; hold the buttons until you see CLA in the LCD screen.

I hope this helps.

Cindy Wells

Excuse me ,which brand of the blood pressure monitor do you use ?And have you call the after-sale to help you ?

Press user select to choose 1 or 2. Press the M button to pull up memory and then press both top buttons at the same time to clear. Display reads CLA if done properly.

I have a Proform ZT5 model - had the same incline/decline problem. It needed calibrated.
- unplug, turn off, and take the key out
- plug machine in
- turn switch on
- Pres and hold the STOP and SPEED UP button at the same time, while holding them insert the RED KEY
- let go of both buttons
- press STOP 1 time
- pres INCLINE UP 1 time
- this should reset it.

The tech on the phone mentioned the importance of turning the maching off, taking the key out, and unplugging after each use. Leaving it plugged in there is still an electrical current running and this can cause more seriouc problems that require a new control panel.

To delete the history first, press the User-Select Button. Then press and hold what looks like a tiny button clock and the + button to the right of it at the same time, while in memory recall mode and the data for that selected user will automatically be erased.

Hope this helps you.

Enough blood on strip?

You can try BOTH wrists, not that this should make a HUGE difference, usually it is the actual pressure itself. I would try to use to machine on someone else and make sure that your actual pressure(meaning the amount of blood, rate of flow) can be monitored with a wrist model. Some people are forced to use a arm style..... take care... Guy

VERY impressed for the age of the machine, mine is 6 years, that is about the longest I can keep mine alive, but I am a nurse and they go quick I suppose. Anyway, to address your issue, put the cuff on, turn it on and let it pump up, but, make sure you are in a VERY quiet area and also NO draft. Sprinkle a SMALL smount, just lightly dusting of baby powder on the line from the cuff to the monitor, check for any blowing of the powder, if you see it, the line is bad, if not, your machine might need to be calibrated, some of them cost more to do this than to simply replace the machine. Good luck and let me know if you need more help, glad to be of assistance. Guy

Make sure the unit is off

Hold down on the memory button until you see "CL" (clear)

Once you see CL appear on the screen release the memory button then tap memory once

You will hear a series of beeps

Memory is now cleared

I changed the batteries, Duh. I changed them once but apparently I has a dud. I opened a new pack of batteries and that took care of it.