Question about Coffee Makers & Espresso Machines

2 Answers

I have elevation coffeemaker where can I get group rupper seal

Elevation coffeemaker

Posted by on

  • Charlee Cornish Jan 12, 2015

    After extensive research for the same thing, I have found out that the Elevation is actually a Breville Modena so look for that or the Breville Roma Cafe, both are the same part numbers and are pretty widely available, even direct fro Breville of you live in the USA or Canada. For some reason the rest of the world don't count and they won't ship to us :(

  • Charlee Cornish Jan 12, 2015

    Sorry I should have said, if the machine has a Woolworth's sticker on the back and looks like the one in my picture. Also, depending on which site you buy from they are called a group seal, or steam seal and are 50mm in size. Be careful to check the size as some are 58mm and no good. Hope this helps.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 250 Answers

What is you exact model number so we can help you better ?

Posted on Dec 02, 2014

  • Charlee Cornish Jan 10, 2015

    I have the exact same query, for model number 376D3320 Pump Espresso Coffee Maker

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I have the exact same problem, but would also like a new single dose dispenser, as mine is a littel clogged after so many years impeccable use. The model number is 376D3320
Pump Espresso Coffee Maker

Any help would be very gratefully received.

Posted on Jan 10, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can I find telephone number for elevation


I found this info on Google:
  • CUSTOMER SERVICE Corporate Office at 5,280 Feet

    Elevation Coffee Traders
    2700 South Tejon Street
    Englewood, CO 80110
    CONTACT US Office 303-922-3104 Fax 303-727-9381
Contact

Dec 02, 2014 | Coffee Makers & Espresso Machines

1 Answer

Treadmills problem ER7


this error has 2 alternatives: proceed according God bless you
E7- 1) Alternative Elevation Motor
1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection
2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate
3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation
4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor
2)Alternative:
Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet
c) Cause: Line Cord Damaged Solution: Replace Line Cord
d)Cause: Fuse Solution: Check Fuse on MCB

Nov 13, 2013 | Exercise & Fitness

1 Answer

I get a E 7 system error what is this error


test the 2 alternatives for this error 7 .God bless you

E7- 1) Alternative Elevation Motor
1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection
2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate
3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation
4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor
2)Alternative:
Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet
c) Cause: Line Cord Damaged Solution: Replace Line Cord
d)Cause: Fuse Solution: Check Fuse on MCB

Oct 06, 2013 | Matrix Commercial Treadmill: Mx-t5x

1 Answer

Error code E 7


proceed according you have two alternative: see the diagrams . God bless you

ERROR CODE # 7

E7- 1) Alternative Elevation Motor

1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection

2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate

3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation

4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor



2)Alternative:

Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet

c) Cause: Line Cord Damaged Solution: Replace Line Cord

d)Cause: Fuse Solution: Check Fuse on MCB
1_23_2013_12_39_45_am.jpg1_23_2013_12_40_46_am.png

Jan 22, 2013 | LifeSpan Fitness Lifespan PRO3 -Treadmill-...

1 Answer

What is error 7 message pop up on treadmill screen


plelase see this 2 alternatives error and proceed see the diagram attached. God bless you

E7- 1) Alternative Elevation Motor

1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection

2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate

3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation

4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor



2)Alternative:

Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet

c) Cause: Line Cord Damaged Solution: Replace Line Cord

d)Cause: Fuse Solution: Check Fuse on MCB
1_22_2013_6_17_11_pm.png

Jan 21, 2013 | Horizon Exercise & Fitness

1 Answer

Treadmill Protec Forerunner 3000 E 7 light on (mother control board FH-3545C-E, VER:B2)


Step 1:

you will have two alternatives:

ERROR CODE # 7

E7- 1) Alternative Elevation Motor

1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection

2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate

3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation

4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor



2)Alternative:

Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet

c) Cause: Line Cord Damaged Solution: Replace Line Cord

d)Cause: Fuse Solution: Check Fuse on MCB

see the block diagram+additional diagrams for troubleshooting and fix it.

God bless you


Step 2:

1_4_2013_6_15_26_pm.jpgelevation motor diagram

Step 3:

treadmill motor control board diagram
1_4_2013_6_16_16_pm.jpg1_4_2013_6_16_30_pm.gif

Jan 04, 2013 | Sportcraft Exercise & Fitness

1 Answer

Error7 on ht402


see the 2 alternatives. and proceed for fix it. God bless you

ERROR CODE # 7

E7- 1) Alternative Elevation Motor

1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection

2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate

3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation

4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor



2)Alternative:

Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet

c) Cause: Line Cord Damaged Solution: Replace Line Cord

d)Cause: Fuse Solution: Check Fuse on MCB



12_13_2012_4_13_31_pm.jpg

Dec 13, 2012 | Exercise & Fitness

1 Answer

Treadmill KETTLER PACER error code E7, what I have to do?


see the next steps and fix it. God bless you

ERROR CODE # 7

E7- 1) Alternative Elevation Motor

1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection

2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate

3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation

4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor



2)Alternative:

Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet

c) Cause: Line Cord Damaged Solution: Replace Line Cord

d)Cause: Fuse Solution: Check Fuse on MCB

Nov 28, 2012 | Kettler treadmill Pacer

1 Answer

E 7 error


1) this means 2 alternatives.

E7- 1) Alternative Elevation Motor

1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection

2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate

3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation

4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor



2)Alternative:

Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet

c) Cause: Line Cord Damaged Solution: Replace Line Cord

d)Cause: Fuse Solution: Check Fuse on MCB
God bless you

Nov 07, 2012 | Exercise & Fitness

1 Answer

What means error 07 by HAMMER walkrunner? how can i resolve that?


means 2 options:God bless you

ERROR CODE # 7

E7- 1) Alternative Elevation Motor

1)Cause: Elevation Motor not moving Solution:Check Elevation Motor connection

2)Cause: Elevation Elevation Motor screw binding Solution: Clean screw and lubricate

3)Cause: Elevation Motor Motor out of Range Solution: Check motor out of elevation

4)Cause: E-Motor Potentiometer: Solution: Replace Elevation Motor



2)Alternative:

Display Doesn't Light Up: a)Cause: On/Off switch Solution: Test unit is turned on b)Cause: Insufficient Power Source Solution: Plug dedicated120V, 20Amp Outlet

c) Cause: Line Cord Damaged Solution: Replace Line Cord

d)Cause: Fuse Solution: Check Fuse on MCB

Oct 08, 2012 | Hammer Walkrunner Rpe Treadmill

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Makers & Espresso Machines Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Kolbrun...

Level 3 Expert

1205 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...