Question about Yamaha RX-V1900 Receiver

1 Answer

I Have an Yamaha RX-V1300. Is there anything I can to allow it to pass thru 3D video signal?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Yamaha Master
  • 5,052 Answers

No. You'll have to connect the video to your TV and then pass the audio to the receiver. 3-D pass-thru was only added to some audio receivers with HDMI outputs in about 2010. The Yamaha RX-V1300 was released at least 7 years earlier. Video monitors/TVs with 3D display were virtually unknown when this model was released. You can find the specifications for this receiver here: http://usa.yamaha.com/products/audio-visual/hifi-components/stereo-receivers/rx-v1300_black__u/ (click on the Specs tab).

I wish that I had better news for you.

Cindy Wells

Posted on Dec 02, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

devocap
  • 201 Answers

SOURCE: Yamaha RX-V800 Composite Video Signal Problem

Hey there fontdude, I will begin assuming you are running your a/v cable into your receiver and then out to the TV or Monitor. If this is the case, I suggest you run the video cable direct from DVD or VCR device to Tv/monitor. You can still run the audio through your receiver. The nature of your problem was probably related to video signal strength being weakened as it ran through your receiver. Good Luck! Let me know how it works for you.

Posted on Feb 09, 2008

  • 52 Answers

SOURCE: Xbox 360 dashboard will not show using Yamaha RX-V663

I had this issue once before, recheck all the conenctions on the tv, and make sure that the HDMI plug in for the TV * if its the older model * make sure it is placed to HDMI not TV.
Please let me know how it goes,
Thanks
Justin
Please rate me

Posted on Jan 07, 2009

smarthome2
  • 1114 Answers

SOURCE: Yamaha RX V 657 - No Sound Output, and No input detection

Bad DSP chip. The only other possibility is if you have the "Direct" on. On the front of the receiver it's a small button. Also make sure your "Speaker Select" A/B is "on" You will see it on the display, it's also a small button on the front of the receiver. If all this is correct and you still have no audio, it's a bad DSP chip. Not worth repair, it's 400-500 repair. Not very common in a Yamaha RX-V series, but I have seen it. I'm a Yamaha Dealer. If you need further help, post a comment and I will be glad to help you further.

Posted on Aug 23, 2009

dunnbiker
  • 8546 Answers

SOURCE: Yamaha rx v663 video signal skipping

I'd leave it that way if it was me.

Posted on Jan 28, 2010

  • 127 Answers

SOURCE: Ipod connection to a Yamaha RX v363 receiver

Fortunately you are wrong :)
On yamaha site you can see that RX-V363 has a DOCK connector, which supports both iPod docking station YDS-11 and Bluetooth Wireless Audio Receiver YBA-10.

Posted on Mar 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung smart tv and a yamaha RX-V592 there is no optical or hdmi on the reviever. I really would like to listen to my tv in surround sound. What can I do?


You need a new receiver, that unit will only do Dolby Pro Logic and all 5 speakers will play but you have to use the composite audio cables(The red and white cables for audio) to get the audio into your receiver and the yellow is video which you can run thru the Yamaha as well if you want any on screen adjustments that unit may have and refer to your owners manual http://download.yamaha.com/api/asset/file/?language=en&site=usa.yamaha.com&asset_id=35288
Net unit make sure it as least 5.1 and you can get Dolby Atmos on a few select models but whatever you get make sure you can pass you video signal thru with HDMI cables or component at the least, a couple of years ago I went from the Yamaha R-V1300 to their RX-A3020 and couldn't be happier, the new one which is the Yamaha RX-A3040 has Dolby Atmos but whatever you get and you are only running it at Dolby 5.1 at least each speaker will be discreet unlike in the Dolby Pro Logic mode you will be running, and 5.1 means 3 speakers in the front and 2 in the back or on the rear sides, so that is your 5 the .1 refers to the subwoofer because it get a one tenth of the signal the rest of the speakers can do so 6.1 means 3 in the front and 3 in the bab plus the .1 subwoofer. My system will do 11.2 but I will be just happy with 7.2 but until I move into a house I run it at 5.1. godd luck and feel free to hit me up with any questions...

Feb 10, 2015 | Yamaha Audio Players & Recorders

1 Answer

How to troubleshoot remote controll


Most Yamaha receivers have a remote ID so if you have more than one Yamaha you can control one without bothering the other, do you still have your owners manual? If not have you tried the people at Yamaha they are very helpful with a problem like this but for an example I have my Remote ID set at ID1 because I do have 2 Yamaha receivers the RX-V1300 and the RX-A3020, see if you can find the section in your manual that talks about remote IDs and let me know if that fixes the problem and you can always goto http://usa.yamaha.com/products/audio-visual/ but that is the site for the United States they do have sites for many countries at http://www.yamaha.com/

Apr 26, 2014 | Yamaha RX-V659 Receiver

1 Answer

No HDMI video using RX-V575 Yamaha Receiver with Panasonic TV C-P60ST30


Michael, I still think it is a connection problem. Try disconnecting the HDMI and see if you get the video. If no, it is a connection problem. Check the connections carefully.

Mar 24, 2014 | Yamaha RX-V575

2 Answers

Yamaha RX-V471 3D video for blu ray will not display on TV


Your Yamaha is the problem here. It cannot handle the signal and process the 3D as it states. What I would do is hook your player direct to your TV in the manner that it works and feed your audio from a different path to maintain surround system. Your tv/dvd player may have an audio out that you can feed back to the Yamaha .

Jan 11, 2014 | Yamaha Rx-v471 3D A/v Receiver

1 Answer

Can the Yamaha RX-V663 (7.1) be upgraded to handle 3-D video input?


Long story short... No. Use your 663 for digital audio, Run video direct to TV for BLURAY & or Cable for 3d content. You can still switch all other video sources thru the receiver. Not cost effective. cost more to do it than you paid for it. Hope this helps

Jul 10, 2011 | Yamaha RX-V663 Receiver

1 Answer

I have yamaha rx-v465 receiver and yds-11 docking station. how can i get tv{through hdmi 1}to display what's on ipod.i have nano w/video camera{newest one]. is this possible


I think it is not possible, because RX-V465 does not have HDMI-video processing. It can only pass-thru the HDMI video to HDMI-out, but not alter the signal in any way.
If it should support TV output with YDS-11, it will work only via analog video out (s-video / composite / component).

Dec 30, 2009 | Yamaha Rx-v465/rxv465 Home Theater...

1 Answer

Connecting a PS2


the rxv463 will not upconvert any video signals. its what they call a pass thru video switch. chances are you are using a red, white. yellow (composite) connection. you will then need to pass this yellow thru the receiver to the yellow output of the receiver and into the yellow input on the tv. the same rule would apply to the component inputs and outputs as well as the hdmis

Dec 07, 2009 | Yamaha RX-V463 Receiver

1 Answer

Video Monitor


Check the Setup menu. Goto Video setup and make sure "conversion" is on. Another way to test is to hook up DVD, Cable Box etc. using only the standard "composite" video output (yellow). It should pass thru monitor out regardless of the internal setting on the receiver. Most electronics now are hooked up with Component, HDMI, or DVI which would require the receiver to downconvert the signal in order for you to view it on another video source. Hope this helps. If you still have a problem, list all your equipment model #s and I can troubleshoot more accurately.

Aug 29, 2008 | Yamaha RX-V863 Receiver

1 Answer

Closed Captioning


you would open it in the plasma disply as it has to be on to work in one mode

Sep 08, 2006 | Yamaha RX-V1300 6.1 Channels Receiver

Not finding what you are looking for?
Yamaha RX-V1900 Receiver Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...