Question about Baby Gear

1 Answer

Where can I find snap on manual for MT2261 - Baby Gear

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    New Friend:

    An expert that has 1 follower.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 45 Answers

Others on internet mention calling Snap On and a free manual might be sent. Otherwise this was found to explains basics:

Reset button - resets the light to zero
Tach/Adv - Toggles between the tach setting and the advance settings.
Flash - On/Off for the strobe
Dec - Decrease the setting
Inc - Increases the setting

Basic use. Hook up the battery leads, Clip the pickup on cylinder number
one. It should come up and ask you to select number of cylinders.
Now it will display the rpms of the engine and can be used as a standard
timing light.
To use the advance feature you need the specs for the engine. They will
tell you that base timing should be something like 4 degrees at 500 rpm.
and that full advance should be something like 30 degrees at 1500 rpms.

Now use the Tach/Adv button to select degrees. Use Dec/Inc to adjust
that number. Then switch to tach and adjust it to the correct number.
When you use the light set properly it will read zero degrees at the set
rpm IF the timing is correct. Use the same thing to check full advance.

Posted on Dec 01, 2014

  • Andy Dickens Dec 01, 2014

    Thank you. I contacted Snap-On and they provided the full manual, which I uploaded here:https://www.scribd.com/doc/248836815/Sna...

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I PUT together the presser foot. the part that snaps into foot


Here's a manual you can download. It should have instructions for attaching your presser foot:

Instruction Manual White 955

If you are using snap-on feet, be sure that you have the low-shank snap-on adapter for your machine (looks something like these) that actually clamps onto the presser foot:

Snap on Shank Low Shank


...

Aug 09, 2015 | White Sewing 955 Mechanical Sewing Machine

1 Answer

I need a manual


See link for snap on pressure washer manuals.
http://www.ppe-pressure-washer-parts.com/snap-on-pressure-washer-parts-manual

Mar 18, 2014 | Snap-On Garden

1 Answer

Look for instruction for Snap On Timing Light model MT2261


Hi,

You can get a manual from any SnapOn dealer.

However, I found a forum that answered this question from someone. He stated that he stole the directions from another site. I'll paste his directions here:

Reset button - resets the light to zero
Tach/Adv - Toggles between the tach setting and the advance settings.
Flash - On/Off for the strobe
Dec - Decrease the setting
Inc - Increases the setting

Basic use. Hook up the battery leads, Clip the pickup on cylinder number
one. It should come up and ask you to select number of cylinders.
Now it will display the rpms of the engine and can be used as a standard
timing light.
To use the advance feature you need the specs for the engine. They will
tell you that base timing should be something like 4 degrees at 500 rpm.
and that full advance should be something like 30 degrees at 1500 rpms.

Now use the Tach/Adv button to select degrees. Use Dec/Inc to adjust
that number. Then switch to tach and adjust it to the correct number.
When you use the light set properly it will read zero degrees at the set
rpm IF the timing is correct. Use the same thing to check full advance.

I hope his instructions are on the mark.

If you appreciated my answer, I'd appreciate a vote. Thanks,

Handie Andie

Apr 05, 2011 | Garden

1 Answer

Had hard time putting snap lock wheel on snap


If this is a dremel tool go to Dremel.com and download a owners manual for this tool, They also have a toll free tech number for assistance.

Jul 10, 2009 | Dremel Tools & Hardware - Others

1 Answer

Installing Graco car seats on the 1304TW Double Snap-n-go


The 1304TW Double snap-n-go is made by Baby Trend.
The manual can be down loaded from;
http://www.babytrend.com/products/20070606/L20076616120272613.pdf

Some instructions are included for Graco.

Apr 28, 2009 | Baby Trend Snap-N-Go LX Double Stroller

1 Answer

Visat machines cannot map drive to Snap 4100


According to Adaptec's site, some SNAP servers are not supported by Vista. I've had the same problem with my Vista setup, but I created a new admin local user on the Snap Server administration pages, and used that username and password when connecting to the snap server. So now I've manually mapped connections to the shares using not my domain credentials, but the local user from the snap server.

Apart from the inconvenience it all works fine an' dandy!

Jan 22, 2008 | Quantum Snap 4100 (m4100) Server

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...