Question about Ryobi Vacuums
Cleaning the main suction pipe, cleaning the filter into the mulch bag, over revving in case something stuck.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a dial on the side of the housing move this to tools this diverts the suction from the floor nozzle to the hose,. .
the brush only rotates slowly.
If this dose not work check red lint filter, .this is in the back corner of the tank lid ,
On the turbo brush there is a sliding swicth ,this diverts the suction from the nozzle of the attachment to the attachments brush
Posted on Nov 18, 2007
You'll have to go into the turbine assembly and check the bearings. Mine stopped spinning and this solved that problem. I simply began working the seized bearing until it rolled again, packed it in grease and reassembled.
Posted on Feb 09, 2008
Hoover Steam Vac Spin Scrub Carpet Cleaner won't...
Posted by hoofbeats1 on Jul 01, 2008
My machine is a little more than a year old. I have used it about 5 times. It started leaking the third time I used it. The fourth time I took it out, the brushes would not spin (I did clean them and rinse them after use each time).
Now the engine screams and won't **** anything up. Do you have any suggestions? My last Hoover Steam Vac was great and lasted for 3 years! Hi,
I have a Hoover Dual V SteamVac F7425-900 that the brushes won't spin. The lint screen is clean & the brushes switch is in the on position.
It dispenses & sucks up the cleaning solution & water; just no brush action. Help
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The only thing that I can recommend is that you may have a bad switch, some vacs may have a broken belt or the drive mechanism inside the Hoover Dual V SteamVac F7425-900 in or by the brush assm section and is need of repair. Please check the trouble shooting section of the owner’s manual if you’re needing help and to save money. If you don’t have one then contact the Hoover factory cust serv. So, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST
Thanks, Don the Vac Man
Go Ahead. Use Us.
Posted on Jul 02, 2008
First, check to see if there is suction without the hose on the base. If not, and there is no blockage, the problem is likely a damaged impeller, the small fan that makes the suction. That will have to be replaced.
Posted on Dec 31, 2008
Tips for a great answer:
Jun 23, 2016 | Vacuums
Jan 09, 2016 | Shop Vac Vacuums
Oct 09, 2014 | Shop Vac Vacuums
May 29, 2011 | Shop Vac 925-13 Canister Wet/Dry Vacuum
Nov 19, 2010 | Vacuums
Aug 22, 2009 | Dyson DC14 Bagless Upright Cyclonic Vacuum
May 04, 2009 | Vacuums
Apr 16, 2009 | Genie Company GV150 Wet/Dry Vacuum
82 people viewed this question
Usually answered in minutes!