Question about DigiWeigh 100 X 0.01 Gram Digital Jewelry Pocket Scale

1 Answer

How can you fix error on screen can it be reset

When it starts it reads error can it be reset

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

It often just needs recalibrating. Try turning the scale on while holding the mode/tare button with nothing on the scale. Then press the tare button again. It should show a calibration weight which you should put onto the scale. Then it automatically calibrates.

Posted on Dec 01, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Console reads "Program Error 1" and otherwise won't operate normally or move out of that mode..


This issue is more than likely being caused by either a faulty PCB or PCBA. It could also be caused by a combination of both of these boards being bad. Below is a link to see these parts. PCB for C40 Console SM27130 SPORTSMITH net

PCBA with LCD Screen for C40 Console SM40070 001 SPORTSMITH net

Jan 10, 2015 | Stairmaster 4600 Cl Cordless Freeclimber

Tip

Error code CANON iR2270 / iR2870 / iR3570 / iR4570 ...


E000 fixing overheating
E001 fixing assembly overheating
E002 fixing assembly low temperature
E003 post-standby fixing low temperature
E007 fixing film rotation error
E010 main motor rotation error
E014 fixing motor rotation error
E019 waste toner case full, waste toner case full sensor error
E020 toner clogging between sub hopper and developing assembly
E024 developing assembly connector disconnection
E025 hopper motor, bottle motor error
E032 NE controller counter error
E064 power supply voltage error (high-voltage)
E100 BD interval error
E110 scanner motor error
E191 communication error for high voltage power supply
E202 CIS home position detection error
E225 CIS light intensity error
E227 reader unit power supply error
E248 backup memory error
E261 zero-cross signal error
E315 image data error
E400 feeder communication error
E490 wrong DF type
E500 finisher communication error
E503 finisher internal communication error
E505 finisher backup memory error
E514 stack delivery/trailing edge assist motor error
E519 gear change motor error
E520 off-set motor error
E530 rear alignment error
E531 stapling error
E532 stapler shift error
E535 swing error
E537 front alignment error
E540 stack tray ascent error/upper tray ascent error
E542 lower tray ascent error
E577 paddle error
E584 shutter error
E590 punching error
E591 puncher dust sensor error
E592 punch horizontal registration sensor error
E593 punch shift error
E5F0 saddle paper positioning error
E5F1 saddle paper folding error
E5F2 saddle guide error
E5F3 saddle alignment error
E5F4 saddle rear stapling error
E5F5 saddle front stapling error
E5F6 saddle butting error
E5F8 saddle connector error
E5F9 saddle switch error
E602 hard disk error
E604 image memory error/shortage
E609 hard disk error
E610 herd disk coding key fault
E674 fax board communication error
E710 IPC initialization error
E711 IPC communication error
E713 communication error for finisher
E716 communication error for pedestal/ communication error for 3-way unitA1
E717 communication error for NE controller
E719 coin vendor error
E730 PDL software error
E732 scanner communication error
E733 printer communication error
E740 Ether board error
E743 DDI communication error
E744 language file/boot ROM error
E745 TokenRing board error
E746 accessories board wrong model error
E748 controller board and SDRAM size mismatch
E805 fan error


Regarding most common errors related to fixing section:

E000 The temperature of the fixing assembly is abnormally high.
0001 While startup control is under way, the reading of
the main thermistor is less than 30 deg C
continuously for 200 msec or more 1 sec after the
start of power supply.
While startup control is under way, the reading of
the main thermistor is less than 70 deg C
continuously for 200 msec or more 2 sec after the
start of power supply.
While startup control is under way, the reading of
the main thermistor is less than 120 deg C
continuously for 200 msec 6 sec after the start of
power supply.
The startup control does not end 30 sec after the
start of power supply.
Reset the condition in service mode:
COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB

E001 The temperature of the fixing assembly is abnormally high.
0000 The reading of the main thermistor is 250 deg C
or more continuously for 200 msec.
0001 The hardware circuit detects overheating of the
main or sub thermistor for 200 msec.
0001 The hardware circuit detects overheating of the
main or sub thermistor for 200 msec.

Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB

E002 The rise in temperature of the fixing assembly is faulty.
0000 While startup control is under way, the reading of
the main thermistor is less than 115 deg C
continuously for 400 msec 1.3 sec after it has
indicated 100 deg C.
While startup control is under way, the reading of
the main thermistor is less than 150 deg C
continuously for 400 msec 1.3 sec after it has
indicated 140 deg C.
Reset the condition in service mode:
COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB

E003 The fixing temperature is too low after a standby state.
0000 While regular temperature control is under way,
the reading of the main thermistor is less than 140
deg C continuously for 400 msec or more.
Reset the condition in service mode:
COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB

E007 The rotation of the fixing film is faulty.
0000 While the fixing motor is rotating, the marker
signal is not detected for 6 sec with the reading of
the main thermistor indicating 100 deg C or more.
Reset the condition in service mode:
COPIER>FUNCTION>CLEAR>ERR. Replace the
main thermistor. Replace the DC controller PCB
REPLACE FIXING FILM ASSY(HEATER)

To enter service mode:

* 2 8 *

on Aug 03, 2010 | Office Equipment & Supplies

1 Answer

How to resolve the A disk error occurred message?


http://www.ubuntu.com/download

Ubuntu 10.10 Latest Version

which can repair what windows has ruined and is unable to fix fix the problem

either burn it to a disk as an iso and install


you might have burn it to an iso first then boot from the cd rom to install ubuntu or you might just try to install ubuntu directly from the download if it does not install you might save it to a folder then burn it as an iso http://download.cnet.com/active-iso-burner/3000-2646_4-10602452.html

once your computer has corrected and installed ubuntu you will be able to reinstall windows

or keep ubuntu and install windows next door to it


you can have a dual boot computer with both windows and ubuntu linux you will need to partition your hard drive to do this

is a free partition program

http://download.cnet.com/minitool-partition-wizard-home/3000-2094_4-10962200.html


hope this helps

Jul 30, 2012 | ASUS Eee PC 900 Notebook

1 Answer

Sigma 8000 plus fix 24 error. I know what the error is for but how do you fix it?


Someone pulled out the tubing improperly. First check to see if all the tubing has been removed, and no little pieces have been left behind.
Step 1. Push Options. type code 89 then push enter.
Step 2. (on screen reads Set Bio Options) type code 430 then push enter.
Step 3. (on screen reads Password) type 9250 then push enter.
Step 4. (on screen reads Fix 00 then turns off).
Step 5. Turn on and check for any more errors.

Oct 08, 2011 | Cameras

1 Answer

My 2006 Honda Pilot had battery disconnected. The display screen on the radio now reads code error. In the past it read Enter Code and allowed me to enter the 5 digit reset code. How do I reset the radio?


you have enterd the wrong coad too many times now and the radio has "locked you out!" go to honda they can fix it if you can prove its your car,,,not easy with honda

Oct 17, 2010 | 2006 Honda Pilot

1 Answer

My ps2 has an error reading disk with gta san andreas


Hi!

Please see this video on how to solve the disk read error on your ps2---

Also see this link on how to troubleshoot these type of errors--

PS2 Disk read error troubleshooting

Please rate this solution as FixYa if found useful.

Thanks
Rylee

Feb 26, 2009 | Rockstar Games Grand Theft Auto: San...

1 Answer

New disks won't work, wii doesn't read


If Wii gives Disc Read Error, first step you need to check is totry another disc or clean the exisitng disc. This will confirm that problem is with either Wii or Disc. If the console itself is giving disc read error then it needs to be repaired. You may check out DIY Wii Fix Guide,that will show step by step information to fix the problem yourself. It also gives information on fixing many Wii Related Problems, so its a kind of Wii Problems Reference Fix Guide


,

Dec 23, 2008 | Nintendo Wii Console

1 Answer

HME9750 error Er4


The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

Let us know if the hard reset does not fix it.

Aug 12, 2008 | Bosch HME9760 Microwave Oven

2 Answers

CD RESET FAILURE


The CD ERROR 277..can be fixed if u make sure the internal cable connection between the Hard disk and the writer are not mixed up and are well fitted...

Jul 11, 2008 | Alesis MasterLink ML-9600

Not finding what you are looking for?
DigiWeigh 100 X 0.01 Gram Digital Jewelry Pocket Scale Logo

797 people viewed this question

Ask a Question

Usually answered in minutes!

Top DigiWeigh Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

678 Answers

Brad Brown

Level 3 Expert

15478 Answers

Tom Chichester

Level 3 Expert

33322 Answers

Are you a DigiWeigh Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...