Question about Beko Washing Machines
I have a beko wme8227b washing machine. it stopped spinning so i checked error code and it was f18, I reset it and it stopped again and then had error code f11, now when I check the error code it says 8360
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Open the small flap at the front bottom right of the machine. DONT unscrew the circular white knob yet!!! Use the small black hose to drain the machine into a tray, by removing the small cap on the end of the hose. You will have to use a tray, rather than a bowl because the hose is only short, and keep emptying the tray.(put a washing up bowl next to the machine, so you don't have to carry the tray.) If water does not come out of the hose, then gently unblock it with a piece of wire or fine knitting needle. When water finally stops coming out of the hose, it is time to gently unscrew the white knob anti-clockwise, and pull it forwards. Now you can clear the debris out of the pump rotor, which is behind the white knob. Check with your finger that it can rotate freely, then replace the white knob firmly. Make sure the small cap is replaced on the end of the hose, clip it back into place and put back the cover panel. If this doesn't work then there is a blockage deeper in the machine, and dismantling will be required. Good Luck!!
Posted on Dec 24, 2009
F-18 means the pump is blocked.
First checkthe filter for coins or other junks. Make sure the drain hose isn't blocked, restricted or kinked. Make sure there's no obstruction in the drain standpipe or U-bend.
If this doesn't work, might as well change the drain pump assembly. http://www.espares.co.uk/parts?k=pump
Hope it helps. ;)
Thanks for using Fixya. A 4-thumbs up for answering your question is greatly appreciated.
Posted on Jun 04, 2011
Tips for a great answer:
Oct 30, 2015 | Beko Washing Machines
May 12, 2014 | Bosch Classixx WFL 2066 Front Load Washer
Sep 13, 2017 | Bosch Logixx WFT 2806 Front Load...
Mar 04, 2013 | Bosch Logixx WFT 2806 Front Load...
Jul 04, 2012 | Whirlpool Washing Machines
May 14, 2011 | Bosch Axxis+ WFR 2460 Front Load Washer
Apr 11, 2009 | Washing Machines
257 people viewed this question
Usually answered in minutes!