Question about New World G60m Gas Single Oven
Nothing yet, waiting on advise many thanks
Most likely thermocouple is bad or dirty,make sure flame is hitting sensor
Posted on Dec 03, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: too hot
first thing is to check if it is front vented or rear vented, if it is front vented you will find warm air blowing out above the door. if not it is rear vented and must have a flu installed behind unit.
Posted on Feb 18, 2008
SOURCE: My grill won't light
Forgive me for asking this, but you have read the instructions haven't you?
If you have, and it's still not working, then the likelihood is that there is a fault, this could be one of the following:
Faulty solenoid valve to grill (some grills had a safety button fitted to stop you from closing the door if the grill was being used)
Blocked pipe inside unit
Either way you need to get a qualified gas engineer to take a look at it, if it's under warrranty call the manufacturers first!
I hope this helps
Posted on Jul 14, 2009
Tips for a great answer:
May 26, 2016 | New World G60m Gas Single Oven
Apr 13, 2017 | Electrolux Ovens
Jul 16, 2011 | New World G60m Gas Single Oven
The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...
Oven not Working or Oven not Heating
Oven Problems Replacing the Igniter
Jan 19, 2011 | New World G60m Gas Single Oven
Sep 02, 2010 | New World Ovens
Jun 04, 2010 | New World G60m Gas Single Oven
Dec 21, 2009 | Whirlpool Ovens
Dec 17, 2008 | Bakers Pride FC-616 Gas Single Oven
Nov 05, 2008 | Ovens
217 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: