Question about Humax Televison & Video
It's definitely not the TV because my DVD player and my wifi don't do it. Have tried switching it offf and on again and wiggling all the cables.. Seems to be the unit.
What about the strength of the signal? If it is very weak, this could happen. Check the signal strength first. Contact any service technician; who have instrument to measure the signal strength.
Posted on Nov 30, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
After the update to 1.15 I had to delete EVERY recording on the unit. After that, any new recordings would burn just fine. However, some have found that same failure even after a hard reboot (repower). Called Humax level-1 support and they suggested a replacement unit so I swapped it out. But I've since learned that TiVo "pushes" a DVD firmware patch (possible supplied by Humax) from 1.08 to 1.15 and that patch is the culprit. That patch is suppose to make the DVD burn at a higher spin rate. After talking with level-2 Humax support they heard of the problem and said "the unit is working as designed", meaning, the DVD drive manufacturer specs say the drive is capable of a faster burn rate. So now I have Humax DTR800 #2 and so-far-so-good, but TiVo hasn't pushed the patch onto the box yet!
Posted on Nov 10, 2007
It can sometimes happen if the signal level drops & the TV digital decoder cannot pick up the strength of the signal when the transmission is back to normal. Switching on & off again resets the processing again. This is a similar effect that can happen with cable or sky transmissions also, it acts the smae way as sometimes having to re-boot your PC if that should crash. It is not necessarily a fault with the TV.
Posted on Oct 24, 2009
Testimonial: "Sounds logical, but why did not the TV digital signal also crash? "
Humax are having problems and are starting to send out software upgrades (night-time updates) - seems to be related to the new formats on the MUXs for the digital switch-over. Our 9150T hasn't been fixed yet but due any day (I hope)
Posted on Jan 05, 2010
SOURCE: I have a Humax DRT800
Thanks for posting your Question.
There are only Two ways you can remove the CD inside..Cause right now, you are not sure if the DVD you inserted is hooked somewhere inside.. Forcing it out might noe be a Good idea..damages may occur..
You can try removing the DVD with the remote control system by pressing the eject button,if that does not do the trick,than you might need to unscrew the Humax DRT800 Tivo player..
That means,you will have to get a set of screw to do that ..Sorry about that...
Or you could remove it by taking it to a repairer if you don't mind..Just a suggestion..
Thanks for using fixya and keep me posted...
Posted on Aug 15, 2011
SOURCE: DVD output to TV not displayed
So you have HDMI off of the PVR into the TV and AV off of the DVD Player into the PVR at the moment? Just for info what connectors do you have at the back of the tv, dvd and pvr? In's and out's...
Posted on Feb 28, 2014
Testimonial: "Can't reply - clicking on "Post" button below after typing reply is just ignored."
Tips for a great answer:
Jan 26, 2015 | Toshiba RDXV60KB DVD HDD VHS Recorder
Nov 24, 2007 | Pioneer DVR-112D DVD RW Dual Layer Burner
Aug 28, 2012 | Humax Televison & Video
Mar 17, 2011 | LG Super Blu BH200 Blu-ray and HD-DVD...
Jan 14, 2011 | LG Televison & Video
Jan 13, 2010 | Televison & Video
Oct 15, 2009 | Humax Televison & Video
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: