Question about Christie "DHD670-E DLP Projector"

1 Answer

My christie dhd670-e dlp projector can't switch on but can switch off using RS232 port how fix problem.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Christie Master
  • 74,459 Answers

Try a reset to this projector, and check. To make it a hard reset, just unplug it from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
If nothing help you, contact the authorized service center.

Posted on Nov 29, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Christie LX100 Projector when projecting a white image there is some yellow tint. Is this something that can be fixed?

If the yellow tint is uniformly over the whole screen then try changing the video colour tint, hue, phase and other chroma related settings in the menu.

Apr 10, 2011 | Christie RoadRunner LX100 Multimedia...

1 Answer

What is system health error message, 1:15 (Critical) TI red sys

Are you sure of your error code? I've checked everywhere in the RS232 error codes of Christie and I didn't see THAT code. I'll post you the link to the manuals.

Christie RS232 Whitepaper

Hope it helps you!

Feb 28, 2011 | Christie HD10KM Projector

1 Answer

Where to find an adaptor which will convert a component feed to the RS232 input required by the projector. Location - South Africa

The rs232 is a communication port only.
It is not for video inputs.
You have to connect the video source to one of the inputs.


Please dont forget to vote if you liked my answer



Feb 10, 2011 | Acer X1230 DLP Projector

1 Answer

When I turn on my Christie DS30-projector, I get a message telling me that the lamp only has 10% left, even though I recently changed it. Is there a way to fix this? It clearly isn't at 10%.

You probably didn't reset the lamp timer after changing the lamp. All I could find in the user's manual is this: In the "utilities" sub menu, reset the lamp timer.

Jan 26, 2011 | Christie DS30 Multimedia Projector

1 Answer

Christie Roadster 16k is about ready for a lamp replacement. Should the air filter be changed at the same time? If so, what's the Christie product number of the filter?

yes. it is recomended to replace the filters whenever the lamp is replaced. if you have a 500w lamp, use filter #003-120118-01; 1000w lamp, filter #003-120117-01; 1200w lamp, filter #003-120116-01.

Oct 01, 2009 | Christie Roadster S+16K DLP Projector

1 Answer

Christie error message "Lamp Interlock Fault"

the switch itself may be broken. check continuity.

May 14, 2009 | Christie Roadster X9 Multimedia Projector

1 Answer

I purchased a Christie ds30 online. Plug it in and pushed switch...nothing happened! Popped the top and saw the fuse was missing...replaced with a smaller fuse to be safe....turned on projector and heard...

Um, regarding the projector power supply that went foo, yes there is a chance of fixing it, is it worth your time and money? Probably not. I would take it to a repair shop before ditching, but plan on purchasing a new unit. Replacing power supplies is possible, but on high-end electronics like projectors, I wouldn't personally reccommend it.

Dec 09, 2008 | Christie Replacement lamp Projector Lamp...

1 Answer

Dell 1200mp

Hi jezzwhizz

You'll see that at the back of your Projector there is 2 VGA ports 1 in (normally blue) and 1 out ( normally grey ).

You are most probably using the grey one , switch it to blue.

May 06, 2008 | Dell 1200MP DLP Projector

1 Answer

Christie lamp explodes

the lamp VIP300w, with Hg
the lamp have the chance to explode,if the lamp used over 2200 hours
you can replace the lamp when it is about 2000 hours
Have a good day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color

motherboard, powersupply ... with high quality and competitive price.
Jerry Lampdeng Limited

Dec 10, 2007 | Christie Office Equipment & Supplies

Not finding what you are looking for?
Christie "DHD670-E DLP Projector" Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Christie Office Equipment & Supplies Experts


Level 3 Expert

2237 Answers

Lawrence Oravetz

Level 3 Expert

9771 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Are you a Christie Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides