Question about Computers & Internet

1 Answer

I have asked so many people but no one has given exact answer. I am unable to face this kind of problem.so what should I do. Please help me.THE PROBLEM IS....... A problem has been detected and windo

I have asked so many people but no one has given exactly answer. I am unable to face this kind of problem.so what should I do. Please help me.THE PROBLEM IS....... A problem has been detected and windows has been shutdown to prevent damage to you computer. IRQL_NOT_LESS_OR_EQUAL. If this is the first time you're seen this stop error screen,restart your computer. If this screen appears again, follow these steps: check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you mighty need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or showing. If you need to use safe mode to remove or disable computers, restart you computer, press F8 to select advanced start up options, and the select safe mode. Technical Information: ***STOP:0X0000000A(0X00000016,0X0000001C,0X00000000,0X804F9F6A) Being dump of physical memory Physical memory dump completed contact your system administrator or technical support group for further assistance.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,128 Answers

The reason no one has given you an "exact answer" is because there IS NO exact answer. Windows error messages, while they may seem detailed, are actually very vague. I personally have seen the same message, although the hex codes may have been different. This problem can be anything from a bad memory module to corrupted hardware drivers, or buggy applications that are used with hardware such as Video Control Centers, Sound Mixers, etc. If this has occurred as the result of some recent software/driver update, reboot and fall back to an earlier configuration. There is a crash dump file that can be enabled and accessed for more data, but this is advanced user territory. You need to download additional software from Microsoft to decode the dump file. Even then, there are no guarantees to easy repair. Windows is a program that grows in size over time and eventually will corrupt and crash. The more apps, toolbars, and programs you load and unload only add to the inevitability of the dreaded crash. Viruses, even those that are detected and removed, also leave tiny traces that eat away at the sanctity of the OS, As a "power user", I find it necessary to reload my system(s) every 18-24 months....more often if I get a serious issue. And I don't mean a overloading of the OS.... this is a "Wipe the partition, format and load it all up"...a process that can take more than a day. If doing the suggested items in the narrative have not helped you find the root cause of your problem, you either need to get experienced help to repair the damage, or wipe and reload the machine. Hopefully you have not lost any critical data, but then sometimes it takes something like this to make one realize that there is a reason for backups offline storage.

Posted on Nov 29, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Compaq starts on pluging power indicates red signal and stops few second


To help you troubleshoot the issue for unable to start the computer, there can be several reasons. Please find the link given below and follow the step-by-step instructions given on it:
http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/unable-to-start-computer/1fbecac8-06a0-42b1-a7fd-0becc2687f31

Also find the additional link given below that can be useful:
https://technet.microsoft.com/en-us/library/bb457123.aspx

GuruAid.com

Jun 27, 2016 | Compaq Computers & Internet

1 Answer

Electrical storm passed through and my TV blinked out and wont turn on again. Is there a reset button to reset or is my TV fried? kindly respond or suggest ideas to prevent this ever again. I had a...


Details given here about the problem you faces with your TV is not sufficiant to post a solution. Will you please provide some more details, with the exact model number to your RCA TV?

Jul 29, 2012 | RCA 20F420T 20" TV

1 Answer

I tried to loginto my Yahoo account but could not even after correct mail id & passowrk, i have entered to security, and customer service asked me some questions, where i have given correct zip code,...


Well I am sorry to tell you but unless you can answer the questions there is no way to access the account. The best that you can do now is to get another email account. I realise this isn't ideal, but there simply is no other way, as if you cannot prove who you are by answering the questions, it simply isn't possible to proceed.
You may however have some luck if you contact the Yahoo mail direct, go to Contact Us. and ask to speak or email or Chat to an administrator and explain what's going on, perhaps they can identify you some other way? and maybe you can gain access this way?

Aug 02, 2011 | Yahoo Mail

1 Answer

Was given a wireless usb adapter and was tole I need a driver where exactly do I go to download one?


Hi,
Visit to the given link and select exact version of your router...for driver... http://kb.netgear.com/app/products/family/a_id/1268
... Hope this has helped you... Please rate the answer... Thanks...

Jul 02, 2010 | NetGear : WG111 54 Mbps Wireless USB 2.0...

1 Answer

What kind of ram do i need to update a systemax amd athon xp 1700...i have two 256 sticks in it now.. thanks chuck


Hello Chuck,
I did some research based on the information you provided and was unable to pinpoint exact specifications for you. I can however, provide you with information that should help answer your question. The following link is from crucial.com which offers a free download that will scan your system and tell you exactly what RAM you currently have installed and make recommendations on what is compatible for your system along with other helpful tools. It also provides you with instructions on how to download and install it. This is a very reliable site and I use it often to help clients. The next site can also be beneficial to provide you with information systemax.com which is a support site and can help you with problems, information, drivers, etc. It asks for your serial number of your system, which should be located on a sticker or label someplace on the outside of your system.
I would recommend that you try the crucial link first as it will be the easiest and fastest tool to use.

I wish I could provide you with a rock solid specific answer right now, but these tools will help you find the answer you are looking for or can be used in the future if you need them. Please let me know if you need further assistance and I will do my very best to help in any way I can. I wish you the very best and I hope you find the information useful to help solve your problem.

If you would not mind, please rate my help. I would greatly appreciate it. Thank you


Apr 22, 2010 | Systemax Ascent AMD Desktop Computer - AMD...

1 Answer

New laptop computer with windows 7 - unable to connect. all other laptops/computers connecting fine. Can see the SSID in the list but won't connect.


Hi, Check the following cause for your problem.
1. Check whether your network adapter is installed.
2. Check the secrete password is same for your new laptop , if not apply the secrete password fixed by you to other systems to connect the network ( By default SSID is the password fixed in most factory)
3. Check whether you have addressed the router in the web address page, if not consult your router documentation to find the exact router model address and when you connect with the router home page it will ask you for the user name and the password you can find it in the router documentation
From your question these are the possibilities, still facing problem kindly comment with more details of your exact problem..
Thank you

Jan 25, 2010 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Unable to Uninstall Font downloaded from internet to phone memory


install font remover
use that apps
1.first install font remover.
2.click on font remover icon and delete the font.
3.restart your mobile.
Font will remove.

May 31, 2009 | Nokia N72 Cellular Phone

3 Answers

Unable to use gprs in lg ku990


Sorry, i have this problem too. I can't unable GPRS in my mobile (KU 990). Any can help me????
Please,,

May 15, 2008 | LG KU990 Viewty

1 Answer

Sony KP-53XBR45 53


its the problem of capacitors and --ics-- on the main power supply board , as some of them are blown off or bulged and not supporting the board to get the tv ON .

how the board looks and how the components on it looks and how to replace them is given in the above link .but keep in mind the pictures given in the above link will exactly not match your board but will give you the rough idea about how to do and what to replace.

http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

also for more help you can read this link in it there are few questions asked with the same problem what you r facing just read the question answers as there are many solutions so this will also help you

please click the link

http://www.anatekcorp.com/faq/archprotv.htm

and finally before all this solution please try the following suggestion.

I recomend to disconnect all the board one by one and clean all the connectors. RSC.

May 12, 2008 | Sony KP-53XBR45 53" Rear Projection...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...