Question about Luxor Televison & Video

1 Answer

I cannot add channels to my luxor 40 inch tv

I have been to the install and retune menu and have tried everything but when I turn the tv off and on again it still says no channels have been added.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Luxor Master
  • 73,611 Answers

Do a reset to this set, and check. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
If reset too do not help you, the main system control memory IC to your set is faulty, and should be replaced.
Contact any service technician.

Posted on Nov 29, 2014

  • Cherry Aguirre
    Cherry Aguirre Feb 05, 2016

    Same with me i cannot retune my luxor 32inch tv.... how can i add channels here in the philippines?

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Retuning digital TV

You need to use the (what looks like a large sattellite) button to retune your tv.
Some Samsung tv's let you access the button but other models have a "D MENU" button on the remote. Press this button, then scroll down to the icon that looks like a large sattellite. Then scroll across and click on "Auto Store" this will then go through all the available channels

Posted on Sep 30, 2009

57 varieties
  • 1653 Answers

SOURCE: 'satellite' icon not available to retune digital channels

Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again

Posted on Oct 02, 2009

57 varieties
  • 1653 Answers

SOURCE: samsung le26r74bd won't retune digital channels

Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again

Posted on Oct 02, 2009

  • 6 Answers

SOURCE: no digital yet tried to retune but greyed out.

Just got through to Samsung support. Turns out the freeview card had frozen and needed a reset. To do this put tv on standby. then press in serries these buttons on the remote: 'info' 'menu' 'mute' 'power' TV will then turn on with a default screen. Press 'arrow down' button untill you reach option 12 'reset' . then push the 'right arrow' and tv will reset and start in plug and play mode and commence a scan when you've set the time. Just retuned mine and its back to normal. Hoorah!!! :-)

Posted on Oct 05, 2009

  • 1 Answer

SOURCE: LG LCD TV 37LP1D digital freeview tuning problems

Hi - I have the same problem. Also in Cornwall LG were not interested in helping because the TV was 3 1/2 years old. There was a possible fix in the end offered via LG at a cost of £180 + vat - a hardware update that might or might not work but I was not going to pay that so I now watch my LG 42 plasma via a £25 digi box from the CO OP. LG must have sold 1000's of these Tv's so when the digital switch starts in the more populated areas of the country I exect many more web postings.

Posted on Dec 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a finlux 32 in 3d tv the probi get is wh tv on i am get this no channels have been added yet please go to install and retune menu to add channels i cant even switch tv off with remote


are the remote batteries ok, fit a new set and retry , click on menu go to settings , click on country if asked, click on automatic tuning, make sure there is a good signal at the aerial ,it may take a while , to tune in all the stations.

Nov 12, 2016 | Finlux Televison & Video

1 Answer

Retune with oneforall remote


look for a menu button and try to find install and retune on the menu

Mar 03, 2013 | Televison & Video

1 Answer

Box will not return from find new channels


Have you tried unplugging from the mains for about 1min,then plug back in and try again,use first time installation for retune.

Sep 23, 2012 | DISH Network DTVPal DVR by

1 Answer

How to retrieve lost channels on digital tv


To restore missing channels, you need to retune your digital receiver (box or TV).

The retuning process runs a scan and finds all the available channels. Your box may have an Add New Channels option that you can use, but this may not pick up other changes such as channels being moved to a different multiplex or removed altogether.
How to retune
  1. Switch on your digital box and/or TV.
  2. Press Menu on the remote control.
  3. Select the Setup or Installation option.
  4. Select the 'First time installation' option (sometimes called 'Factory reset', 'Full retune' or 'Default settings').
  5. Press OK if your equipment asks if you want to delete all your channels. Don't worry, this is normal.
  6. If you are prompted for a code, try 0000 or 1234.
  7. Channels will be automatically installed. This may take a few minutes and your equipment may shut down and restart.
  8. After retuning, you will have to redo your Favourites list and other settings. If you retune a digital TV recorder, you also should reset future recordings.

Feb 27, 2012 | Toshiba Televison & Video

1 Answer

I have a Daewoo DSL22V1WCD combined tv/dvd with built in freeview, our area is in the grasp of the digital switchover - everything I look at says I need to retune the tv - but this tv has various "sources"...


Press the DTV menu button (<<)
Press the Down arrow until you reach Settings
Press OK
Press the Down arrow until you reach Installation
Press OK
Press the Down arrow until you reach First Time Installation
Press OK

Aug 04, 2010 | Daewoo Televison & Video

1 Answer

Samsung le26r74bd won't retune digital channels


Updating the Channel List Automatically You can update the channel list when the broadcaster adds new Services or if you move the TV to a new location.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.

2. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3. Press the ENTER button again, to select "Country".

4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for Analogue TV is not changed. (Refer to page 11 of the user guide)

5. Press the ▲ or ▼ button again, to select "Auto Store". Press the ENTER button. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER button with "STOP" selected.

6. Press the EXIT button to exit. If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed. Check the aerial connection and the try the procedure again

Sep 30, 2009 | Samsung LE26R74BDX 26 in. HD-Ready LCD...

4 Answers

SAMSUNG LE32R73BDX/XEU TV Digital TV Stuck on bbc1, no access to DTV menu to reset or retune. Sometimes picture is frozen, always it shows BBC banner and Mono. Standby - Info - menu - Mute - Power is not...


just spoke to Samsung support and it turns out that the freeview tuner had froze and needed resetting. To do this put TV on standby and then push in series these buttons on the remote: 'info, menu, mute, power' the TV will then turn itself on and display a menu. Press the 'down arrow' untill you've highlighted option 12 - 'reset' and then press the 'right arrow' to enter the option. TV will turn off and when you turn back on it will start in 'plug & play' mode as if new. Set the time and country options and then it will perform a complete scan. I've just retuned mine and all back to normal. Hoorah!!!! :-)

Sep 27, 2009 | Samsung LE32R74BDX 32 in. HD-Ready LCD...

1 Answer

When turning on the Sony KV-28DX20u TV I find that all the program settings have been lost. Have retuned the set but after turning off and on again these settings are again not saved.


The retuning process is as follows:

  1. Press the [i+] button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

Mar 28, 2009 | Sony KV-28DX20 28" TV

1 Answer

Retuning digital TV


You need to use the (what looks like a large sattellite) button to retune your tv.
Some Samsung tv's let you access the button but other models have a "D MENU" button on the remote. Press this button, then scroll down to the icon that looks like a large sattellite. Then scroll across and click on "Auto Store" this will then go through all the available channels

Mar 26, 2009 | Samsung LE32R41BD 32 in. HD-Ready LCD...

1 Answer

Loss of freeview channels


The retuning process is as follows:

  1. Press the [i+] button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If toy wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

Feb 08, 2008 | Sony KDL-26U2000 26 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Luxor Televison & Video Experts

Sp Gupta

Level 3 Expert

670 Answers

sureshd2008

Level 2 Expert

46 Answers

rugby prop

Level 3 Expert

548 Answers

Are you a Luxor Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...