Question about Office Equipment & Supplies

1 Answer

How do i work the 3 in 1 remote for my ink'2eat buds

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 18 Answers

Hi Frances, a couple of things..You don't give the Product name. I.E The maker of the printer. Next was there no Users Manual with the goods...Check the website of the supplier and open same in search box enter request for Instruction Manual andenter the model number of the Printer. This I would try first...Apart from going back to the supplier and talking to them.
Next you could Google Wikipedia Free Encyclopedia , in the Top Right hand Search box, enter: Color Printer when the page comes up enter in that search box How to I work the 3 in 1 remote
I can't guarantee you get an answer, but if you take the time to see what each entry covers...maybe.

Posted on Nov 26, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Message waste ink absorber is full


Cleaning Waste Ink Absorber Cannon IP1600 without tearing the whole printer apart(theres no need to, really.)

Materials needed:
Cotton buds, tissue paper, warm water,long tweezers/ Chopsticks (its quite useful if you know how o use it),toothpick/something with a fine end, torch


1)Unplug the printer. Put it on you desk so its easier to work with.


2)Lift up the cover of the printer. There should be a whitish kind of tape-like ribbon attached to the ink cartridges. The ink cartridges should be the the very right end of the interior of the printer.


3)Gently pull the ribbon the is attached to the cartridges so as to expose the waste ink absorbers that nest directly underneath the original position of the cartridges. For your convenience you can just pull the cartridges to the very end so you have a bigger working area. The waste ink absorbers are really tiny,hard and flat pieces of material that are around 1+ to 2cm long in breath and length.


4)Using a torch, locate the waste ink absorbers (2). They should be held by two small black flaps each. If you are really not sure just use a tissue and feel around. The area where you get a exceptionally much ink stains should be at/pretty near the absorbers. Using tweezers/chopsticks, remove the absorbers carefully(don't lose it). You might wanna clean up the interior abit using cotton buds..


5) Press each absorber gently in between layers of tissues to get some ink out first. After that just rinse it with warm water. (I just used warm water, but if you have cleaning agents you can go ahead and use them) Dry it in between layers of tissues and air it abit for further drying.


6) After it is dried you can put them back to their original positions. Keep them in place with the flaps on the sides. The flaps can be easily put in place with the help of toothpick/fine end objects. If you cannot reach the flaps just use the tweezers to help you with it.


7) Next up, at the base of the interior of the printer you can feel something soft and spongy. It looks like a long grey piece of delicate sponge. Clean that too if it is dirty. Replace it after cleaning and drying. Be careful not to tear it and remember to put it back securely, by using cotton buds to tuck it into place, if not it might interfere with printing process or come lose while printing.


8) Reset your waste ink counter (there are walk-throughs online) ---> http://tricks-collections.com


9) If not reset your printer. I did.

[ Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open cover and hold power button.
3. Connect the printer cable.
4. Close door, then release power button. ] ---credits: http://printertools.blogspot.com/2007/12/resetter-canon-ip1600.html


Kay thats all folks! I had a REALLY TOUGH time trying to figure out all these myself, GAWD. Hope my experience will be helpful to you though! :)

Sep 25, 2011 | Canon PIXMA iP1600 Printer

1 Answer

I just put in a new black ink cartridge and it will not print black ink. The color ink prints, but the black will not.


Hello nicfurtaw, there are dried ink on the ink carousel, or cradle, you may need to soften the ink. Use cotton buds, dip into warm water and gently wipe the ink hole where the ink pass through, until the carousel is clean.
  1. remove the black ink cartridge
  2. find the spot where the ink pass through
  3. see dried ink on it.
  4. use cotton buds dipped in warm water to soften the ink.
  5. do this several times
  6. clean enough, test to see if the black ink will pass through
  7. replace the black ink cartridge
  8. test the printer.

Feb 10, 2011 | HP Photosmart C3180 All-In-One InkJet...

1 Answer

ESP 3 Multifunction Printer/ Copier/ Scanner: I have put new ink cartridges in but it is still p...


First make sure you are placing the right
color cartridge into the right slot.
Most Printers are touchy about the
installation of ink cartridges. If the
instructions say to press the cartridge
into the slot until you hear a loud click,
that's what they mean. If at first you
don't succeed, remove the cartridge and
reinsert it into the slot again and press
on it hard till it clicks.
Then your printer should work properly.
Hope this is of some help. Bud

May 17, 2010 | Kodak ESP 3 Multifunction Printer/ Copier/...

3 Answers

Waste Ink Counter Reset Tools Download Resetting


1. hold RESUME then press & hold POWER
2. release RESUME, then press it twice, the light should go amber then green again.
3. you're now in service mode (you can release POWER now)

for reset waste tank reset is 4 presses of the RESUME button. To confirm, press POWER once.

Hope this helps. Please rate my response.
Thanks.
Have a good day.

Apr 12, 2010 | Canon PIXMA iP4600 Color InkJet Photo...

1 Answer

Black ink cartridges is full no ink reaching the print head the 3 colors are working fine???


First make sure you are placing the right
color cartridge into the right slot.
Most Printers are touchy about the
installation of ink cartridges. If the
instructions say to press the cartridge
into the slot until you hear a loud click,
that's what they mean. If at first you
don't succeed, remove the cartridge and
reinsert it into the slot again and press
on it hard till it clicks.
Then your printer should work properly.
Hope this is of some help. Bud

Apr 06, 2010 | Brother MFC 240C All-In-One InkJet Printer

1 Answer

I NEED A LIST OF TV CODES FOR MY RCA 3-DEVISE UNIVERSAL REMOTE


Here you go bud:
http://www.thompsontv.com/rcarc.html

Cheers

Feb 16, 2010 | RCA 3-Device Universal Remote with...

1 Answer

Ran out of black ink. replaced cartridge. now


If it ran dry before you replaced it then you need to do a deep clean of the head. This can be done under the maintenance tab of printer properties. If that doesn't get it working then physically remove the print head and clean it with a water moistened cotton bud (make sure you use a separate cotton bud for each ink nozzle). Running a cartridge completely dry can (and often does) damage the print head (overheats due to lack of cooling provided by the ink flow).

Oct 03, 2009 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Epson RX420 new black ink cartridges displaying empty


Normal 0 Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 03, 2009 | Epson RX620 All-In-One InkJet Photo...

3 Answers

Printer not printing. only certian text (minimal) Light colour (Black) I have replaced all ink with genuine cartriges. HP 3110 all in one printer. Printer 2 years old.


Good Day,
I recently had this same problem what you have to do is go in your printer settings control, and do an alignment... This worked for me, hopefully it will work for you

Nov 10, 2008 | HP Office Equipment & Supplies

2 Answers

Error- no ink cartridges


First make sure you are placing the right
color cartridge into the right slot.
Most Printers are touchy about the
installation of ink cartridges. If the
instructions say to press the cartridge
into the slot until you hear a loud click,
that's what they mean. If at first you
don't succeed, remove the cartridge and
reinsert it into the slot again and press
on it hard till it clicks.
Then your printer should work properly.
Hope this is of some help. Bud

Mar 18, 2008 | Epson Stylus Photo RX700 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...