Question about Washing Machines

1 Answer

What is the cause for this error code EH1 on AWD-703HCTP Sanyo washing machine?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 86 Answers

A possible answer is that the machine runs for a short while and then stops. So check water supply filter is not blocked, pipe kinked, outflow pump clear and that the filter is clear.
THE biggest cause for any machine not to work is actually the pump out pump and filter are jammed probably thru stuff not removed from clothing, coins (will nicely smash holes in machine) paper and fluff. Also check for overloading, frankly most people overload machines. Just a thought, nobody has turned the water off!
Your error codes may be on the machine or service booklet. The above are the most frequent generic problems.

Posted on Nov 26, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

kevin_getz
  • 1031 Answers

SOURCE: I have a electrolux ewf1282 washing machine with a error code EH1 can you tell me what this is

Incorrect mains frequency-The power supply frequency is not within the configured limits.

Posted on May 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I received an error EH1 in my AEG electrolux Lavamat L64850l washing machine, how can solve it?


Problems with the electrical power supply, the appliance remains in the alarm state until achieve conditions of work, and stabilizes the voltage and frequency, and the machine resets quenching (controller to the position "0").
Obviously there is a problem in the electrical network so my suggestion is to call your local electrician or try connect power supply from any other room.

Dado

May 04, 2015 | AEG Washing Machines

1 Answer

Sanyo washing machine AWD-703HCTP DISPLAYED EH1 ERROR CODE what is the problem


Maybe you have solved your problem, but if not, I haven't much good news, just a website with more info about Sanyo washing machines. That division of the giant Sanyo was sold to Panasonic.

The link for more about the washers is...

http://ashachine.info/sanyo-washing-machine/

Good luck.

Nov 25, 2014 | Washing Machines

1 Answer

I have a electrolux ewf1282 washing machine with a error code EH1 can you tell me what this is


Incorrect mains frequency-The power supply frequency is not within the configured limits.

May 18, 2012 | Electrolux Washing Machines

1 Answer

Eh1,, what is this means?


EH1 Code = means that the supply to the machine is incorrect

zjlimited_1232.jpg


Hope helps (reemmber to rate this answer).

May 12, 2011 | Washing Machines

2 Answers

My washing sent in control panel alarm is ( EHO) what problem model ( zanusssi zwf 16581w)


C\nt find a fault code EH0. EH1 EH2 AND EH3 all relate to power supply problems voltage to high or low . the electronics dont like a dirty supply spikes and fluctuations upset them. they dont always work from a small generator supply.

Jul 25, 2010 | Zanussi ZWF1650W Front Load Washer

1 Answer

What does error code EHO mean


Hello,

That error code does not exist,the closest is EH1.which means that the supply to the machine is incorrect.What is the model,and PNC.number,hope this helps.

Regards.

Jul 02, 2010 | Zanussi Washing Machines

1 Answer

240v 50Hz Zanussi zwf14581w wont start code EH1 with 220v 60Hz


Hi,
EH1 is a fault code that relates specifically to the frequency of the electrical supply. The power board is designed for 50Hz and will notice if it does n't get what its looking for.
You may be able to purchase a new main PCB that works with a 60Hz supply. You would need to contact Electrolux to ascertain whether this would be possible.

Nov 23, 2008 | Zanussi ZWF1430W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...