Question about Crafts & Hobbies
Additional information. This machine was originally bought with a different badging/ distributor, namely WMS PM12 & the serial no. is 537364. Date of manufacture was 1998-4. The instruction book only refers to Geetech & Chiu Ting Machinery. Hope this helps. Regards Reg Beety
Surfing the net reveals that the planer was made by geetech& chiu and was named to any retailer (GMC,Bosch Talon Masters anybody who would place an order for quantity), and that wanted one. ( go on line for geetech&chiu and read all the stories). What this means that the drive belt you are after will be a generic belt and will probably be available fro reputable machinery repairers, retailers, gearing/bearing shops. What you will need is the belt as a sample so that it can be matched.If you do not have the belt any more then run a piece of string around the pulleys and get a measurement. get a width measurement as well and see if it is toothed or multiple v's
Posted on Nov 26, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The belt routing diagram is shown on a decal located on thehorizontal metal support above the radiator and under the hood support rod (passenger's side near the coolant overflow tank).
Posted on Jan 23, 2009
I have this car as well. I have found this site very useful.
Posted on May 30, 2010
SOURCE: need help I have a
Here is a link to a Dayco PDF file that will have a belt diagram for you. Find you car on the main page, fine the number to the diagram and thats how you belt routes. Depends on month of manufacture yours could have 2 guide or tensioner pulleys. Facing the engine, one should be the top left pulley, that one is common to all. The optional tensioner will be the next pulley to the right. If one is missing it may have fallen off and you may be able to run a shorter belt.
Posted on Mar 02, 2011
SOURCE: I have the following DME
For 1998 BMW 740i engine running problem
32 = Misfire detected - Cyl. #1
33 = Misfire detected - Cyl. #2
35 = Misfire detected - Cyl. #4
40 = Misfire detected, catalyst damaging, Cyl #2
42 = Misfire detected, catalyst damaging, Cyl #4
3E = Misfire detected, random or unknown cylinder
3F = Misfire detected, catalyst damaging, Cyl #1
4b = Misfire detctd, catlyst dmg, random/unknown cyl.
For more informations you can visit this site at page no. #2 : http://www.bimmerforums.co.uk/forum/f99/peake-research-r5-fcx-code-tables-t56366/page2.html
Posted on May 04, 2011
Tips for a great answer:
Feb 10, 2016 | Dewalt DW680K 3-1/4" Planer
Dec 14, 2015 | Masonry Tools
Nov 24, 2014 | Crafts & Hobbies
Sep 16, 2014 | Delta 12" Portable Planer Model 22-560 W/...
Sep 04, 2014 | Crafts & Hobbies
Aug 01, 2012 | Masonry Tools
Dec 20, 2010 | Garden
let me know if you have more questions The thermostat is located in the engine block just to the side of the water pump underneath the housing where the upper radiator hose is attached.
Fig. Lubricate the O-ring with coolant and make sure the thermostat is installed with the bleeder facing up-2.8L V6 engines
WARNING The thermostat vent valve must be installed facing up otherwise the cooling system may develop air pockets and allow the engine to overheat.
Sep 27, 2010 | 2003 Volkswagen Passat
Apr 28, 2009 | 1999 Audi A4
310 people viewed this question
Usually answered in minutes!